DIP引脚应变分析

为了研究双列直插式元件在振动冲击环境下的可靠性,首先通过建立其物理模型,利用莫尔积分方法对引脚的变形进行分析,可以得到引脚任意位置的变形量;而后建立元件的实体模型,利用有限元方法对其应力应变进行仿真分析,结果表明在外载荷作用下,引脚是元件的薄弱环节,尤其在引脚与其他部位连接位置处易出现应力集中使其应变量较大,导致可靠性降低;最后进行振动冲击环境下的应变测量试验,在30 g的冲击载荷下,引脚的最大变形量可达66.47×10-6,在50 g的冲击载荷下,引脚的最大变形量可达173.95×10-6,在扫频过程中,当激振频率为146.48 Hz时,引脚的变形量最大。     

Analysis of some critical aspects in hot machining of Ti-5553 superalloy: Experimental and FE analysis

In this study, a newly developed titanium superalloy, i.e., the Ti-5553 alloy has used for hot machining. This material replaced Ti-grade-5 alloy in the application of aerospace, automobile, and biomedical sector. However, similar to Ti-grade-5 alloy, the Ti-5553 alloy has a low thermal conductivity which makes it difficult-to-cut material categories hence, high tool wear, cutting force and bad surface finish. Hot machining of Ti-5553 has been studied at different machining condition (room and hot) using Deform-2D finite element analysis. The result from the simulation test was compared with the experimental value and reduction of cutting and thrust forces was observed. The experiment was carried out with the same input parameters as simulation, and good coherence between them observed. Additionally, cutting zone temperature, effective stress, etc. for both room and elevated the temperature are also discussed.     

高精度有限体积格式在三维曲线坐标系下的应用

为了构造在光滑区具有较高分辨率并且可以无振荡捕捉激波的高精度有限体积格式,同时降低格式在模板选择上遇到的困难,基于逐维重构方法,发展了结构网格下的高精度有限体积格式,并将这一格式推广到三维曲线坐标系下,从而可以适应相对复杂外形下的计算。为充分验证格式的有效性,选取一系列典型算例进行计算:在等熵涡输运和二维喷管流动中验证了格式的精度可以达到设计精度;在双马赫反射问题中格式也表现出良好的捕捉激波的能力。数值计算表明,上述格式在曲线网格上具有较高的数值精度和鲁棒的激波捕捉能力,适用于流体力学方程的计算。     

混沌理论在雷达中的应用

混沌动力学作为一门新学科已经引起了世界各国科学界的重视,是近年来非线性科学领域的热门学科,混沌系统初值的敏感性和两个混沌系统间同步的实现,使得混沌用于保密通信成为可能,海杂波的混沌特性使人们开始探索混沌在雷达中的应用.研究表明,混沌在杂波分析与建模、信号检测、目标识别及伪随机码波形设计等领域内取得了可喜的成果.研究了混沌在雷达中的应用,分析了目前混沌在雷达中的应用现状,预测了未来研究发展的趋势.     

一类非线性控制系统模型的数学分析

采用非线性分析的方法,研究了一类非线性控制系统模型,得到解的整体存在性。     

对称螺杆流量计转子热变形的综合分析

利用有限元理论对８０ｍｍ口径的对称螺杆流量计转子的热变形进行了综合分析．整个计算程序分为平衡和非平衡两套系统．通过计算转子的热变形,推导出热变形对转子泄漏和运转等方面的影响．最后得出对生产有指导意义的具体数值和具体方法．     

Optimal service and arrival rates in Jackson queueing networks

In this paper we present an algorithm for solving a class of queueing network design problems. Specifically, we focus on determining both service and arrival rates in an open Jackson network of queueing stations. This class of problems has been widely studied and used in a variety of applications, but not well solved due to the difficulty of the resulting optimization problems. As an example, consider the classic application in computer network design which involves determining the minimum cost line capacities and flow assignments while satisfying a queueing performance measure such as an upper limit on transmission delay. Other application areas requiring the selection of both service and arrival rates in a network of queues include the design of communication, manufacturing, and health care systems. These applications yield optimization problems that are difficult to solve because typically they are nonconvex, which means they may have many locally optimal solutions that are not necessarily globally optimal. Therefore, to obtain a globally optimal solution, we develop an efficient branch and bound algorithm that takes advantage of the problem structure. Computational testing on randomly generated problems and actual problems from a health care organization indicate that the algorithm is able to solve realistic sized problems in reasonable computing time on a laptop computer. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 1–17, 2000     

迟滞非线性弹性元件动力特性数学模型

描述了迟滞非线性弹性元件动态特性数学模型的发展状况．详细介绍了理想干摩檫模型、双线性模型、Bouc模型和迹法模型．提出了评判数学模型优劣的标准．     

一类非线性问题的数值分析

利用Ｌａｐｌａｃｅ方程的基本解,将变系数非齐次Ｈｅｌｍｈｏｌｔｚ偏微分方程的边值问题化为积分方程问题。再用边界无法进行离散,并对区域结点及边界结点的方程耦合求解。文末算例表明本文方法能够达到较高精度。     

非线性干扰观测器的高超声速飞行器自适应反演控制

针对高超声速飞行器参数不确定弹性体模型,提出了一种基于非线性干扰观测器的自适应反演控制器设计方法。将曲线拟合模型表示为严格反馈形式,采用反演方法设计控制器。采用动态面方法获取虚拟控制量的导数,避免了传统反演控制"微分项膨胀"问题。为了增强控制器的鲁棒性,基于二阶跟踪-微分器设计了一种新型非线性干扰观测器,以此对模型不确定项进行自适应估计和补偿。仿真结果表明,控制器对模型不确定性和气动弹性影响具有强鲁棒性,且能实现对速度和高度参考指令的稳定跟踪。