一种冲击信号调理电路的设计

针对测量冲击信号时,高冲击振动传感器输出的正负电荷信号不能直接被AD进行模数转换并且冲击信号中常常会混有噪声信号的问题,设计了一种包含电荷-电压转换、隔直放大、十阶抗混叠低通滤波等的冲击信号调理电路.并对冲击信号调理电路中各个模块进行了理论分析和节点参数的计算.通过实验:实际测量到的滤波曲线、冲击信号调理电路输出的电压都与理论计算值十分接近.此冲击信号调理电路能够成功地将传感器输出的正负电荷信号调理成一定范围内的电压信号,能够有效地滤除冲击信号中的高频噪声.     

二阶阶跃模型下导航信号畸变对接收机载噪比估计影响分析

载噪比作为评估导航信号质量的重要指标,直接影响着接收机的捕获、跟踪和电文解调性能。推导了基于国际民航组织二阶阶跃信号畸变模型下导航接收机采用相关、非相关处理时载噪比估计与畸变模型参数之间的解析表达式,并分析了畸变参数对导航接收机载噪比估计误差的影响。理论分析及仿真结果表明:数字畸变参数变化范围下导航信号载噪比变化在10-2量级,增大模拟畸变的振荡频率或者减小衰减频率将会提高载噪比估计值,模拟畸变参数变化引起的载噪比损耗可达0.1d BHz,畸变参数对载噪比估计的影响整体上都较小,因此导航接收机的载噪比输出不能作为监测导航信号是否异常的完备检测量。     

基于可调光纤F-P滤波器解调的分布式光纤光栅传感系统

提出并实现了一种可满足工程实用要求的波分复用光纤光栅传感网络解决方案,系统通过可调谐光纤F-P滤波器的连续扫描实现波长信号的解调.该传感系统扫描带宽50 nm,单点工作带宽5 nm,对一般应用系统每根单纤可设20-30个点,系统最高扫描频率200 Hz,分辨率5 pm(约5με或0.5℃).     

小子样条件下战斗部爆炸仿真数据可信性分析

高效毁伤战斗部试验次数受到严格控制,如何在小子样条件下分析仿真数据的可信性非常有必要。通过均匀试验得到了战斗部在地下目标腔室内部爆炸某点冲击波最大超压峰值,利用normplot及Lilliefors函数分析了仿真数据的分布特征,而后在已有检验方法的基础上,结合顺序统计量和均匀分布的特点提出了一种新的相容性验证思路。研究表明:该方法不受样本容量的限制,利用MATLAB程序编程可以快速判断仿真数据的可信性。     

Optimal and asymptotically optimal policies for assemble‐to‐order n‐ and W‐systems

We consider two specially structured assemble‐to‐order (ATO) systems—the N‐ and W‐systems—under continuous review, stochastic demand, and nonidentical component replenishment leadtimes. Using a hybrid approach that combines sample‐path analysis, linear programming, and the tower property of conditional expectation, we characterize the optimal component replenishment policy and common‐component allocation rule, present comparative statics of the optimal policy parameters, and show that some commonly used heuristic policies can lead to significant optimality loss. The optimality results require certain symmetry in the cost parameters. In the absence of this symmetry, we show that, for systems with high demand volume, the asymptotically optimal policy has essentially the same structure; otherwise, the optimal policies have no clear structure. For these latter systems, we develop heuristic policies and show their effectiveness. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 62: 617–645, 2015     

Auctions in the post‐change‐order period

A change order is frequently initiated by either the supplier or the buyer, especially when the contract is long‐term or when the contractual design is complex. In response to a change order, the buyer can enter a bargaining process to negotiate a new price. If the bargaining fails, she pays a cancellation fee (or penalty) and opens an auction. We call this process the sequential bargaining‐auction (BA). At the time of bargaining, the buyer is uncertain as to whether the bargained price is set to her advantage; indeed, she might, or might not, obtain a better price in the new auction. To overcome these difficulties, we propose a new change‐order‐handling mechanism by which the buyer has an option to change the contractual supplier after bargaining ends with a bargained price. We call this the option mechanism. By this mechanism, the privilege of selling products or services is transferred to a new supplier if the buyer exercises the option. To exercise the option, the buyer pays a prespecified cash payment, which we call the switch price, to the original supplier. If the option is not exercised, the bargained price remains in effect. When a switch price is proposed by the buyer, the supplier decides whether or not to accept it. If the supplier accepts it, the buyer opens an auction. The option is exercised when there is a winner in the auction. This article shows how, under the option mechanism, the optimal switch price and the optimal reserve price are determined. Compared to the sequential BA, both the buyer and the supplier benefit. Additionally, the option mechanism coordinates the supply chain consisting of the two parties. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 248–265, 2015     

滤波器阶数对导航接收机时域抗干扰的影响分析

滤波器阶数是影响卫星导航接收机时域自适应抗干扰性能和计算复杂度的核心参数。为了解决当前阶数选取严重依赖工程经验而影响分析不足的问题,分析了滤波器阶数对导航接收机时域自适应抗干扰性能的影响,可为导航接收机低复杂度时域抗干扰的研究提供理论支撑。该分析面向不同干扰环境,分别以滤波器幅频响应和信号载噪比为评估指标,并通过仿真实验和实测对传统最小均方算法和改进型最小均方算法进行验证,提出了一种基于数字滤波器设计的自适应最优滤波器阶数的设计方法。实验数据分析表明,通过适当提升滤波器长度,可以有效提升时域自适应滤波器的抗干扰性能;在实际应用中,可根据实际抗干扰需求,对滤波器阶数进行优化设计。     

物理弱间断线上Ⅲ型斜交裂纹高阶渐近场

针对功能梯度材料层/均匀材料基体的物理弱间断线上斜交裂纹,通过分离变量和级数展开法构造位移函数,求得了裂纹尖端高阶渐近场。其界面裂纹尖端高阶渐近应力场具有与均匀材料相同的r-1/2的奇异性。由高阶项的表达式可知：材料非均匀性对应力场有显著影响。数学上,该解为此类问题的特征函数,能够描述此类材料各种含裂纹结构的整个应力场和位移场,当非均匀参数为零时,它可以退化到均匀材料反平面裂纹问题经典的W il-liam s解。     

在军援装备物资科研订购中引入激励机制探析

军援装备物资的订购筹措是军事援助中较为重要的一项工作.在军援装备科研订购过程中充分利用经济杠杆的调节和行政手段的调控,通过招标竞争、利益诱导、资金保障、实施奖惩等方面的具体措施,通过履行合同、择优订货等环节的激励,最大限度地调动和发挥各方面的积极性,逐步建立适应军援装备发展需要和社会主义市场经济的新型军援装备科研订购体制.     

Scheduling recurrent construction

A problem we call recurrent construction involves manufacturing large, complex, expensive products such as airplanes, houses, and ships. Customers order configurations of these products well in advance of due dates for delivery. Early delivery may not be permitted. How should the manufacturer determine when to purchase and release materials before fabrication, assembly, and delivery? Major material expenses, significant penalties for deliveries beyond due dates, and long product makespans in recurrent construction motivate choosing a release timetable that maximizes the net present value of cash flows. Our heuristic first projects an initial schedule that dispatches worker teams to tasks for the backlogged products, and then solves a series of maximal closure problems to find material release times that maximize NPV. This method compares favorably with other well‐known work release heuristics in solution quality for large problems over a wide range of operating conditions, including order strength, cost structure, utilization level, batch policy, and uncertainty level. Computation times exhibit near linear growth in problem size. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004