Comparison between constant‐stress and step‐stress accelerated life tests under Time Constraint

By running life tests at higher stress levels than normal operating conditions, accelerated life testing (ALT) quickly yields information on the lifetime distribution of a test unit. The lifetime at the design stress is then estimated through extrapolation using a regression model. In constant‐stress testing, a unit is tested at a fixed stress level until failure or the termination time point of test, whereas step‐stress testing allows the experimenter to gradually increase the stress levels at some prefixed time points during the test. In this work, the optimal k‐level constant‐stress and step‐stress ALTs are compared for the exponential failure data under complete sampling and Type‐I censoring. The objective is to quantify the advantage of using the step‐stress testing relative to the constant‐stress one. Assuming a log‐linear life–stress relationship with the cumulative exposure model for the effect of changing stress in step‐stress testing, the optimal design points are determined under C/D/A‐optimality criteria. The efficiency of step‐stress testing to constant‐stress one is then discussed in terms of the ratio of optimal objective functions based on the information matrix. © 2013 Wiley Periodicals, Inc. Naval Research Logistics 00: 000–000, 2013     

利用径向力平衡飞行控制的航天器高精度轨道捕获方法

为实现对探测器轨道形状与高度的精准调整,提出一种径向力平衡飞行的航天器连续推力控制新方法。建立连续推力平衡飞行的动力学极坐标模型,并推导出特殊条件下的解析轨道解,进一步分析边值条件,给出连续推力的控制律。利用这一平衡飞行控制理论,构建轨道捕获的最优控制策略。考虑推力器的推力水平,通过一次或多次的控制过程,实现对轨道形状、轨道高度及轨道相位的综合调整。数值仿真表明:利用平衡飞行的轨道控制方法,配置微小推力器的空间引力波探测器可以实现高精度的轨道捕获;该方法具有控制过程可解析、计算量小、简便、实用等特点。     

含脉冲负载的综合电力系统储能优化配置研究

考虑到舰船环境限制和高能脉冲负载对储能的需求,有必要对储能装置进行合理的选型和优化配置,来提升综合电力系统性能。为此,基于带权极小模理想点法和层次分析法,提出了一种储能装置性能评价函数,并以其为优化目标,进行储能装置优化配置。所提出的评价函数充分考虑系统需求和脉冲负载特性,以储能装置体积、质量和经济性作为评价函数主要组成部分,同时考虑功率、能量、电压、荷电状态等约束,建立优化配置模型,并采用差分进化算法进行求解。以高性能锂电池和超级电容器为例,对所提模型进行求解计算,结果表明在所给权重系数下锂电池性能更优,更适用于综合电力系统,并给出了优化配置后的指导方案。     

弹道导弹被动段最优脉冲变轨方法

弹道导弹大气层外飞行时间长且弹道固定,易被敌方预测和拦截。针对以上问题,本文提出一种最优脉冲式变轨方法,该方法设计的弹道由2条不同的椭圆弧段组成,成功命中目标的同时,增加了敌方的拦截难度。以机动变轨所需能量和变轨后飞行剩余时间的加权最优为性能指标,设计了利用遗传算法在初始弹道上寻求最优变轨点的方法。最后,将遗传算法搜索最优点结果与遍历搜索结果进行对比,其最大误差为 ,从而验证了遗传算法在应用于导弹变轨问题,用以寻求最优变轨点是准确有效的。     

翼伞精确空投系统归航轨迹规划与控制

翼伞归航轨迹规划与控制问题是翼伞系统在一定初始状态下,利用自身可操作性,完成从初始位置到目标位置的转移问题。针对翼伞空投系统不同归航要求,规划出满足精度要求为圆径概率误差（ CEP ）小于40m的归航轨迹并经过一定量的控制完成翼伞空投系统精确空投任务。首先建立翼伞系统状态空间六自由度模型,并在此基础上提出系统简化稳态模型,通过最优控制方法,规划出满足空投要求的最优归航轨迹后对翼伞进行不断控制直至目标点。最后通过Matlab仿真试验,绘出翼伞系统归航轨迹图与控制变化图。     

武警部队快速机动中最优路径的实现

紧急条件下武警部队快速机动最优路径，是一个多目标多约束随机动态交通网络寻优问题。在分析交通网络拓扑化特点及最短路模型前提下，着重研究道路通行能力带给复杂公路网络道路寻优问题的影响，并结合GIS系统利用改进的Dijkstra算法求解。     

More on the search for an infiltrator

We have asymptotically solved a discrete search game on an array of n ordered cells with two players: infiltrator (hider) and searcher, when the probability of survival approaches 1. The infiltrator wishes to reach the last cell in finite time, and the searcher has to defend that cell. When the players occupy the same cell, the searcher captures the infiltrator with probability 1 ? z. The payoff to the hider is the probability that the hider reaches the last cell without getting captured. © 2002 John Wiley & Sons, Inc. Naval Research Logistics, 49: 1–14, 2002; DOI 10.1002/nav.1047     

Designing a screening experiment for highly reliable products

Within a reasonable life‐testing time, how to improve the reliability of highly reliable products is one of the great challenges to today's manufacturers. By using a resolution III experiment together with degradation test, Tseng, Hamada, and Chiao (1995) presented an interesting case study of improving the reliability of fluorescent lamps. However, in conducting such an experiment, they did not address the problem of how to choose the optimal settings of variables, such as sample size, inspection frequency, and termination time for each run, which are influential to the correct identification of significant factors and the experimental cost. Assuming that the product's degradation paths satisfy Wiener processes, this paper proposes a systematic approach to the aforementioned problem. First, an intuitively appealing identification rule is proposed. Next, under the constraints of a minimum probability of correct decision and a maximum probability of incorrect decision of the proposed identification rule, the optimum test plan (including the determinations of inspection frequency, sample size, and termination time for each run) can be obtained by minimizing the total experimental cost. An example is provided to illustrate the proposed method. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 514–526, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10024     

舰机时间协同对潜检查搜索样式

舰机一体化反潜是反潜作战最有效的形式,而舰机协同反潜搜索是其最重要的组成部分.从实际应用的角度出发,研究了舰机时间协同检查搜索样式,并给出了基于该样式的实际应用例子.     

引入区域量化的相控阵天线维修优化模型

针对大型相控阵天线维修成本高、多部件维修时机难以确定、模型仿真计算困难等问题,提出一种引入区域量化的维修优化模型。建立天线阵列的区域量化模型,将天线阵列维修问题转化成一个由不同区域阵元组成的k/n系统维修优化问题。以使用可用度为约束条件,以单位时间维修费用最小为优化目标,建立引入区域量化的大型相控阵天线多部件视情维修决策优化模型,并通过算例仿真与分析进行了模型验证。结果表明:提出的维修优化模型真实有效,能够很好地解决分布不均匀的相控阵天线维修优化问题。