粘弹性泊松比的各种表述方法

本文讨论线性粘弹泊松比的四种表述法:微分算子法、遗传积分法、复数表示法和经验表示法的实用价值和问题。为固体推进剂力学性态的描述提供了方便。     

火炮身管寿命的分布函数

本文运用可靠性理论和《130mm 加农炮剩余寿命的一种预测模型》一文的结果,证明火炮身管寿命服从 Weibull 分布,并以130mm 加农炮为实例,给出参数的比值估计方法.     

炮兵对有生力量压制比的仿真计算方法

为了评估炮兵对有生力量压制效果,应用离散事件仿真方法建立了炮兵射击有生力量仿真模型,提出一种炮兵对有生力量压制比的仿真计算方法。首先,给出了压制比的概念与模型。然后,建立了基于离散事件仿真的炮兵射击有生力量模型。最后,结合实例验证了仿真计算方法的正确性。     

利用复单脉冲比的平面阵列雷达群目标检测方法

针对平面阵列雷达群目标检测问题,以矩形阵为例,详细分析方位向和俯仰向复单脉冲比虚部的统计特性;建立平面阵列雷达群目标检测模型,根据恒虚警检测原理推导复单脉冲比虚部的椭圆判决域,并利用复单脉冲比实部辅助判决,综合提出基于复单脉冲比的平面阵列雷达群目标检测算法。针对双目标情形进行仿真实验,结果表明:在较高信噪比、较大角度间隔以及幅度相当且相位差较大的条件下算法能够有效检测群目标。     

变极性等离子弧焊换向过程控制方法研究

通过试验证实了变极性等离子弧焊换向过程中存在电弧电流谐振现象,且不同极性的电流谐振峰值不同,依据电弧理论分析发现换向期间等效电弧电阻是一个时变量。对换向电路建模分析和仿真结果表明,在换向期间系统阻尼比为时变量,调整系统阻尼比是降低电流谐振峰值的有效途径。又根据变结构控制思想提出了新的换向控制方法,并重新设计了换向电路,显著降低了电流谐振峰值,改善了大电流焊接时换向器件的工作状态,为大功率变极性等离子弧焊电源的研制和开发提供了依据。     

基于VFGPIR联合特征的决策级加权融合检测方法

车载前视地表成像雷达(VFGPIR)探测浅埋目标时面临虚警率过高问题,可利用序列图像特征的联合检测解决这一问题.首先利用Fisher鉴别比(FDR)定量评估从单帧和序列图像中提取的单个特征的鉴别能力;然后针对单个最优序列特征无法满足探测指标要求提出一种基于决策级加权融合的多特征联合检测方法;最后利用接收机工作特性(ROC)曲线来验证所提方法的有效性.试验结果表明:序列特征比单帧图像特征具有更好的鉴别能力;所提方法性能优于单个最优序列特征、特征向量和多数票融合准则对应的检测结果,有望满足实际探雷应用需求.     

Directional change‐point detection for process control with multivariate categorical data

Most modern processes involve multiple quality characteristics that are all measured on attribute levels, and their overall quality is determined by these characteristics simultaneously. The characteristic factors usually correlate with each other, making multivariate categorical control techniques a must. We study Phase I analysis of multivariate categorical processes (MCPs) to identify the presence of change‐points in the reference dataset. A directional change‐point detection method based on log‐linear models is proposed. The method exploits directional shift information and integrates MCPs into the unified framework of multivariate binomial and multivariate multinomial distributions. A diagnostic scheme for identifying the change‐point location and the shift direction is also suggested. Numerical simulations are conducted to demonstrate the detection effectiveness and the diagnostic accuracy.© 2013 Wiley Periodicals, Inc. Naval Research Logistics, 2013     

Counterinsurgency force ratio: strategic utility or nominal necessity

As a consequence of intervention in Iraq and Afghanistan, force ratio for counterinsurgency (COIN) has come under increased scrutiny. Reduced to its essence, the issue is simply, ‘How many troops does it take to get the job done?’ This answer has been sought by the US military, academia, and think tanks. There have been numerous responses, culminating in several ‘plug-and-play’ equations for minimum force ratios in COIN operations. Due to the impossibility of determining precisely how many insurgent forces there are, it has become common to base force ratios on the population of the country. In the realm of policy, the question above is posed as, ‘How many of our troops does it take to get the job done?’     

装药长径比对EFP成型作用效果影响分析

针对装药长径比对EFP成型的影响,基于一种球缺型药型罩EFP,利用ANSYS／LS-DYNA仿真软件对其成型过程进行建模仿真,研究EFP成型过程及其各项参数．在该基础上,改变装药高度得到不同的装药长径比数据,并对不同长径比EFP形成过程进行仿真,得到不同装药长径比EFP的速度、速度增长率及炸药能量利用率等数据,为选择最佳装药长径比提供依据．     

行波提取型同轴渡越时间振荡器模拟

提出了一种行波提取型同轴渡越时间振荡器,器件的提取腔采用了类膜片加载的扩展互作用腔结构,具有束波作用效率高,电子束空间电势能低等优点。提取腔的电场结构为3π/2模,与传统的类π模结构相比,提高了微波群速度,有利于微波能量的提取。通过引入前置反射腔,提高了调制腔的品质因数,显著降低了起振时间。利用数值模拟软件对所设计的器件进行了模拟和优化,在二极管电压530kV,二极管电流12.8kA,外加导引磁场0.7T的条件下,得到了2.41GW的输出功率,微波频率7.76GHz,束波功率转换效率达到35.5%。