冲压增程弹进气道设计方法与性能分析

以冲压增程弹为应用背景进行了进气道设计.结合增程弹的特点,讨论了轴对称进气道中心锥参数、喉道参数、外罩参数的选择.特别对进气道唇口处参数、扩张段角度设计方法进行了分析.设计了单锥混压式、单锥外压式以及双锥混压式三种进气道,并进行了数值模拟.分析了进气道主要设计参数对其性能的影响.数值结果表明,就增程弹的性能要求而言,双锥混压式进气道的性能较高.     

基于并行模拟的多核集群系统性能预测和分析

针对多核集群系统所表现出的新的性能特征,提出了面向多核集群系统消息传递应用程序的并行模拟模型并设计、实现了一个并行模拟器MCPSim(Multi-core Cluster Parallel Simulator),MCPSim在功能模型和性能模型上体现了片内核间、结点内片间以及结点间等三个层次上消息通信的特点,同时支持对应用的消息数量、通信量等的百分比分布的profiling功能,采用PRIMEJ、acobi3D、NPB IS以及HPL等Benchmark程序对MCPSim进行了测试,结果表明MCPSim性能预测的精度优于BigSim,同时能够广泛应用于针对多核集群系统消息传递应用程序的性能分析中。     

舰载导弹瞄准方法精度分析及其估值

矢量比较瞄准方法是近期国内提出的一种全新的瞄准方法.针对这种瞄准方法进行了可行性分析;该方法提出了在进行导弹方位瞄准时,需要将制导平台的框架角作为间接测量值,对间接测量值进行了精度分析;最后根据国内惯性器件测量精度、机械安装精度给出了这种瞄准方法的精度估值.     

二维超声速空气引射器启动特性试验研究

超声速引射器是高空模拟试车台的重要组件,在发动机启动前利用引射器对试验舱预抽真空,可避免发动机启动初始时刻燃气漏入试验舱造成燃气在发动机中分离,对获取发动机在高空环境下的完整推力特性具有重要意义。而该工况下超声速引射器的启动过程是引射器工作过程中最为恶劣的工况,设计不合理的引射器会导致启动压力过高甚至不能实现启动。建立了缩比超声速空气引射器试验台对超声速引射器的启动特性进行研究,采用压力测量方法结合纹影技术对超声速引射器处于极限启动压比时的流场进行了描述,研究结果表明混合室收缩比越小,引射器极限启动压比越低。同时给出了定位超声速引射器不启动原因的判据:当引射器不启动是由引射总压不足引起时,盲腔压力在引射总压提高时降低,并在临界启动状态下达到最小值;而由混合室收缩比过小导致的引射器不启动在引射总压提高时盲腔压力单调上升。     

RTI测试研究

运行支撑系统(RTI)作为应用高层体系结构(HLA)进行分布仿真的支撑系统,是实现HLA的核心。RTI的功能和性能直接关系到HLA仿真系统开发与应用的成败。首先阐述了RTI测试的内容和指标,接着结合例子详细研究了RTI测试的方法,最后对RTI测试研究进行了总结,为提高基于HLA的分布交互仿真系统的质量及可信度提供了基础。     

Effect of wave shaper on reactive materials jet formation and its penetration performance

Wave shaper effect on formation behavior and penetration performance of reactive liner shaped charge (RLSC) are investigated by experiments and simulations. The reactive materials liner with a density of 2.3 g/cm³ is fabricated by cold pressing at a pressure of 300 MPa and sintering at a temperature of 380 °C. Experiments of the RLSC with and without wave shaper against steel plates are carried out at standoffs of 0.5, 1.0, and 1.5 CD (charge diameter), respectively. The experimental results show that the penetration depths and structural damage effects of steel plates decrease with increasing the standoff, while the penetration depths and the damage effects of RLSC without wave shaper are much greater than that with wave shaper at the same standoff. To understand the unusual experimental results, numerical simulations based on AUTODYN-2D code are conducted to discuss the wave shaper effect, including the propagation behavior of detonation wave, the velocity and temperature distribution of reactive jet, and penetration depth of reactive jet. The simulations indicate that, compared with RLSC without wave shaper, there is a higher temperature produced inside reactive jet with wave shaper. This unusual temperature rise effects are likely to be an important mechanism to cause the initiation delay time of reactive jet to decline, which results in significantly decreasing its penetration performance.     

潜射鱼雷在引导兵力通报下的远距攻击

在分析引导兵力通报情况下鱼雷远距攻击流程的基础上,建立了引导兵力通报下鱼雷远距攻击中的有关数学模型,并对鱼雷远距攻击命中概率进行了计算分析,对鱼雷在引导兵力通报下远距攻击的作战使用提出了对策建议。     

应用Isight的复合材料桁架结构优化设计

轻质复合材料及其结构以其优异的力学性能在航天航空飞行器上得到了广泛应用。考察玻璃纤维/环氧复合材料方形截面桁架在典型弯曲载荷工况条件下的非线性结构承载性能。采用Isight集成平台对桁架结构进行多参数优化设计,获得满足结构刚度和承载性能要求的最轻质桁架结构的几何参数,并分析最优化结构在载荷作用下的结构非线性响应行为。结果表明采用Isight平台对桁架结构进行多参数优化设计具有较高的效率和可信度。     

顶置武器站性能评估方法

在评估指标体系和虚拟样机仿真测试评估数据的基础上,对顶置武器站性能评估进行研究。对评估方法进行研究,提出了适合顶置武器站性能评估特点的灰色模糊综合评估法,选用灰色关联度分析计算指标权重,建立开放性的隶属矩阵,最终建立顶置武器站性能评估模型。通过实例评估表明该评估模型准确可靠。     

Estimating failure time distribution and its parameters based on intermediate data from a Wiener degradation model

Instead of measuring a Wiener degradation or performance process at predetermined time points to track degradation or performance of a product for estimating its lifetime, we propose to obtain the first‐passage times of the process over certain nonfailure thresholds. Based on only these intermediate data, we obtain the uniformly minimum variance unbiased estimator and uniformly most accurate confidence interval for the mean lifetime. For estimating the lifetime distribution function, we propose a modified maximum likelihood estimator and a new estimator and prove that, by increasing the sample size of the intermediate data, these estimators and the above‐mentioned estimator of the mean lifetime can achieve the same levels of accuracy as the estimators assuming one has failure times. Thus, our method of using only intermediate data is useful for highly reliable products when their failure times are difficult to obtain. Furthermore, we show that the proposed new estimator of the lifetime distribution function is more accurate than the standard and modified maximum likelihood estimators. We also obtain approximate confidence intervals for the lifetime distribution function and its percentiles. Finally, we use light‐emitting diodes as an example to illustrate our method and demonstrate how to validate the Wiener assumption during the testing. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008