基于贝叶斯混合源分离方法的声纳探测误差模型

声纳的探测误差模型是声纳仿真的核心技术。针对现有的声纳误差白噪声模型仿真逼真度低的问题,提出了基于贝叶斯混合源分离方法,建立了声纳的探测误差模型,提高了声纳误差模型的性能。与传统的白噪声仿真方法相比,基于贝叶斯混合源分离方法的声纳误差仿真模型具有较好的逼真度,可以有效地对声纳探测误差进行建模和预测。     

A standardized scan statistic for detecting spatial clusters with estimated parameters

The scan statistic based on likelihood ratios (LRs) have been widely discussed for detecting spatial clusters. When developing the scan statistic, it uses the maximum likelihood estimates of the incidence rates inside and outside candidate clusters to substitute the true values in the LR statistic. However, the parameter estimation has a significant impact on the sensitivity of the scan statistic, which favors the detection of clusters in areas with large population sizes. By presenting the effects of parameter estimation on Kulldorff's scan statistic, we suggest a standardized scan statistic for spatial cluster detection. Compared to the traditional scan statistic, the standardized scan statistic can account for the varying mean and variance of the LR statistic due to inhomogeneous background population sizes. Extensive simulations have been performed to compare the power of the two cluster detection methods with known or/and estimated parameters. The simulation results show that the standardization can help alleviate the effects of parameter estimation and improve the detection of localized clusters. © 2012 Wiley Periodicals, Inc. Naval Research Logistics, 2012     

基于预测命中点的机动目标最优制导方法

针对导弹攻击机动目标的情况,提出了一种基于"当前"统计模型的预测命中点方法。首先对目标进行实时机动检测,并预测了拦截时刻目标的位置。基于预测命中点的结果,推导得到导弹攻击机动目标最优制导方法的解析解。该方法无需提前假设目标机动模式,适用性好。在多个假想的攻击场景下对制导方法进行了仿真,仿真结果验证了该方法是有效的。     

基于时延的宽带LFM信号DOA估计算法

针对常用宽带LFM信号DOA估计算法采样数据量大、运算量大的特点,提出了一种基于时延的宽带LFM信号DOA估计算法。先把阵元接收到的信号变换到频域,而后用极值频率点进行时延估计,并对各极值频率点的时延估计值进行加权平均,进而估计出宽带LFM信号的来波方位。仿真验证了该算法的合理性和有效性。     

双球破片冲击柱壳装药的临界起爆条件

为了研究导弹战斗部(柱壳装药)在破片场中的累积毁伤问题,在现有单破片起爆平板装药的Jacobs-Roslund经验准则的基础上,分别建立了考虑破片尺寸、破片撞击角度、柱壳装药的装药半径和壳体厚度的单球破片、双球破片冲击柱壳装药临界起爆条件的工程分析模型.该模型计算结果与数值模拟结果和现有试验结果相吻,证明利用该模型能较...     

Formulations for dynamic lot sizing with service levels

In this article, we study deterministic dynamic lot‐sizing problems with a service‐level constraint on the total number of periods in which backlogs can occur over a finite planning horizon. We give a natural mixed integer programming formulation for the single item problem (LS‐SL‐I) and study the structure of its solution. We show that an optimal solution to this problem can be found in \begin{align*}\mathcal O(n^2\kappa)\end{align*} time, where n is the planning horizon and \begin{align*}\kappa=\mathcal O(n)\end{align*} is the maximum number of periods in which demand can be backlogged. Using the proposed shortest path algorithms, we develop alternative tight extended formulations for LS‐SL‐I and one of its relaxations, which we refer to as uncapacitated lot sizing with setups for stocks and backlogs. {We show that this relaxation also appears as a substructure in a lot‐sizing problem which limits the total amount of a period's demand met from a later period, across all periods.} We report computational results that compare the natural and extended formulations on multi‐item service‐level constrained instances. © 2013 Wiley Periodicals, Inc. Naval Research Logistics, 2013     

三维移动脉动源格林函数的对称性及其应用

为进一步提高三维有航速船舶耐波性预报的计算效率,将对称性引入到移动脉动源格林函数法的速度势求解之中,提出了基于格林函数对称性的水动力快速求解措施。从源点对场点的对称特性出发,推导获得了调和函数的法向偏导数在船体对称线元和面元处的积分对称关系式,开展了对称性在简化边界元积分方程系数矩阵中的应用,进而构建了高效求解三维船舶耐波性能的理论计算方法。数值结果及算例分析表明:水动力计算中移动脉动源格林函数的对称性有利于降低计算量和减少系统内存,且适用于有航速船舶在波浪中的波浪干扰力、运动响应和自由面波形的数值模拟,可拓展至两船水动力干扰及复杂船型的频域水动力分析计算之中。     

从主要评价指标分析科技期刊的影响力——以《火力与指挥控制》期刊为例

从期刊的来源指标和被引指标对《火力与指挥控制》期刊进行了分析,结果表明,平均引文数、平均作者数、总被引频次、影响因子、权威因子等指标均呈现增长趋势,说明期刊的影响力在不断地扩大。但是,也不得忽视海外论文比为0、被引半衰期较短等稍差指标。通过分析,促使《火力与指挥控制》稳步向前发展,进一步提升学术期刊的影响力。     

改进蚁群算法在DSR路由协议中的应用

针对移动Ad hoc网络节点移动频繁和单路径DSR路由协议不能均衡负载、网络健壮性低以及蚁群算法存在局部查询最优的问题,提出一种改进的蚁群算法,并把改进的蚁群算法应用到单路径路由协议DSR,设计出基于蚁群算法的多路径路由协议IDSR,通过仿真实验,从影响Ad hoc网络路由协议性能优劣的3个主要指标来比较IDSR、DSR路由协议和SMR路由协议的性能,实验结果表明,虽然改进协议IDSR路由开销比DSR、SMR稍有增加,但分组的投递率和平均端到端延时性能都有明显提高。     

金属射流欧姆加热效应的影响因素分析

为探究影响金属射流欧姆加热效应的因素,在被动电磁装甲系统等效电路模型的基础上,根据虚拟源点理论建立金属射流的作用时间模型,进一步明确金属射流在侵彻被动电磁装甲过程中每部分射流微元的作用时间;结合金属射流的比作用量模型,利用Matlab软件对金属射流的电流和比作用量波形随被动电磁装甲系统的电感、电容、电阻和充电电压的变化规律进行数值分析．仿真结果表明：随着系统电感的减小、电阻的减小、电容的增大和充电电压的增大,金属射流比作用量的峰值增大,有利于射流发生电爆炸．