延安新区压实Q_2黄土增减湿高压压缩变形特性

为研究压实Q2黄土在高压力条件下的增减湿高压压缩变形特性,采用DGD系列型高压固结仪分别对不同初始压实度和不同初始含水率条件下的压实Q2黄土试样进行高压压缩试验,分析压实Q2黄土压缩变形特性随初始压实度和初始含水率的变化规律;运用不同方法对压缩试验成果进行整理,分析侧限条件下压实Q2黄土应力应变关系特点。结果表明:压实Q2黄土的压缩变形特性受初始压实度和初始含水率的影响较大,在最大压实度和最优含水率处的压缩变形量最小;初始压实度不同,拟合压实Q2黄土应力应变关系曲线的函数也不同,在较低初始压实度条件下,用双曲线拟合效果较好,此时割线模量与应力呈线性关系,在较高初始压实度条件下,用幂函数拟合效果更好。     

一种锥比率数据包络分析模型及有关结论

本文研究一种锥比率数据包络分析模型,它既能反映各项输入或输出的相对重要性和对某些决策单元的偏好,又可单纯地评价决策单元间的相对技术有效性。本文着重讨论这一模型的DEA有效性与多目标规划非支配解的关系以及有效决策单元的存在性等问题,论证了有关结论。     

易燃可燃介质的压力容器火灾事故处置对策探讨

压力容器内的工作介质大多为易燃、易爆和有毒物质,一旦发生泄漏或火灾事故,就会造成重大经济损失和人员伤亡。根据压力容器的形状、结构特点、火灾特点和多年参加压力容器火灾事故处置取得的经验,提出处置压力容器火灾事故的基本对策。     

4点弯曲载荷作用下残余应力与弹性模量比对涂层/基体材料界面能量释放率的影响

采用有限元计算方法研究了在4点弯曲载荷作用下,残余应力、涂层与基体的弹性模量比(简称弹性模量比)对涂层/基体材料界面能量释放率及其相角的影响。结果表明:能量释放率随着残余拉应力、弹性模量比的增大而增大;能量释放率中的相角也随着残余拉应力的增大而增大,但并不敏感,其随着弹性模量比的增大而减小。研究结果可为评价涂层/基体材料界面结合性能提供理论依据,有助于深化对涂层/基体材料界面结合性能的认识。     

应用压力间断解析解修正AUSM+-up格式

AUSM+-up格式是近年来发展的AUSM类格式,通过在对流通量中引入压力耗散,同时在压力通量中引入速度耗散,使之在各种马赫数下均有良好的收敛性和稳定性。然而,通过对格式的分析,我们发现当马赫数为零时,在压力间断位置会出现质量通量无穷大的非物理现象。为了克服这一缺陷,采用特征线法获得了压力间断问题的解析解;以此为基础,对对流通量中的压力耗散项进行修正,发展出新的AUSM+-up格式。以新的格式对不同速度驱动下的冲击波发展、不同强度压力间断问题和激波衍射问题进行了仿真,计算结果与理论解吻合得较好。     

On the application and extension of system signatures in engineering reliability

Following a review of the basic ideas in structural reliability, including signature‐based representation and preservation theorems for systems whose components have independent and identically distributed (i.i.d.) lifetimes, extensions that apply to the comparison of coherent systems of different sizes, and stochastic mixtures of them, are obtained. It is then shown that these results may be extended to vectors of exchangeable random lifetimes. In particular, for arbitrary systems of sizes m < n with exchangeable component lifetimes, it is shown that the distribution of an m‐component system's lifetime can be written as a mixture of the distributions of k‐out‐of‐n systems. When the system has n components, the vector of coefficients in this mixture representation is precisely the signature of the system defined in Samaniego, IEEE Trans Reliabil R–34 (1985) 69–72. These mixture representations are then used to obtain new stochastic ordering properties for coherent or mixed systems of different sizes. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

某型柴油机进气道通流特性试验研究

分析了某型柴油机气缸盖进气道流量系数和涡流比随气阀升程的变化规律,以及进气道前后的压差对流量系数和涡流比的影响.试验结果表明,该型柴油机进气系统在低负荷时可以实现较大的涡流比,从而可以改善柴油机低负荷性能.     

Discriminating between the Weibull and log‐normal distributions

Log‐normal and Weibull distributions are the most popular distributions for modeling skewed data. In this paper, we consider the ratio of the maximized likelihood in choosing between the two distributions. The asymptotic distribution of the logarithm of the maximized likelihood ratio has been obtained. It is observed that the asymptotic distribution is independent of the unknown parameters. The asymptotic distribution has been used to determine the minimum sample size required to discriminate between two families of distributions for a user specified probability of correct selection. We perform some numerical experiments to observe how the asymptotic methods work for different sample sizes. It is observed that the asymptotic results work quite well even for small samples also. Two real data sets have been analyzed. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

Properties of some stochastic orders: A unified study

The notions of the likelihood ratio order of degree s (s ≥ 0) are introduced for both continuous and discrete integer‐valued random variables. The new orders for s = 0, 1, and 2 correspond to the likelihood ratio, hazard rate, and mean residual life orders. We obtain some basic properties of the new orders and their up shifted stochastic orders, and derive some closure properties of them. Such a study is meaningful because it throws an important light on the understanding of the properties of the likelihood ratio, hazard rate, and mean residual life orders. On the other hand, the properties of the new orders have potential applications. © 2003 Wiley Periodicals, Inc. Naval Research Logistics, 2004.     

大长径比固体火箭发动机点火瞬态过程数值分析

研究大长径比固体火箭发动机点火瞬态特性,采用守恒型N S方程描述了集点火器、燃烧室和喷管于一体的数学仿真模型,应用NND-3差分格式进行数值求解,计算结果表明,点火期间,发动机内除了压强急升之外,还存在振荡和拍击现象。