Influence of yttrium on microstructure and properties of Ni–Al alloy coatings prepared by laser cladding

Ni–Al alloy coatings with different Y additions are prepared on 45^# medium steel by laser cladding. The influence of Y contents on the microstructure and properties of Ni–Al alloy coatings is investigated using X-ray diffraction, scanning electron microscopy, electron probe microanalyzer, Vickers hardness tester, friction wear testing machine, and thermal analyzer. The results show that the cladding layers are mainly composed of NiAl dendrites, and the dendrites are gradually refined with the increase in Y additions. The purification effect of Y can effectively prevent Al₂O₃ oxide from forming. However, when the atomic percent of Y addition exceeds 1.5%, the extra Y addition will react with O to form Y₂O₃ oxide, even to form Al₅Y₃O₁₂ oxide, depending on the amount of Y added. The Y addition in a range of 1.5–3.5 at.% reduces the hardness and anti-attrition of cladding layer, but improves obviously its wear and oxidation resistances.     

Dynamic globularization prediction during cogging process of large size TC11 titanium alloy billet with lamellar structure

The flow behavior and dynamic globularization of TC11 titanium alloy during subtransus deformation are investigated through hot compression tests. A constitutive model is established based on physical-based hardening model and phenomenological softening model. And based on the recrystallization mechanisms of globularization, the Avrami type kinetics model is established for prediction of globularization fraction and globularized grain size under large strain subtransus deformation of TC11 alloy. As the preliminary application of the previous results, the cogging process of large size TC11 alloy billet is simulated. Based on subroutine development of the DEFORM software, the coupled simulation of one fire cogging process is developed. It shows that the predicted results are in good agreement with the experimental results in forging load and microstructure characteristic, which validates the reliability of the developed FEM subroutine models.     

Effect of post weld heat treatment on tensile properties and microstructure characteristics of friction stir welded armour grade AA7075-T651 aluminium alloy

This paper reports the effects of post weld heat treatments, namely artificial ageing and solution treatment followed by artificial ageing, on microstructure and mechanical properties of 12 mm thick friction stir welded joints of precipitation hardenable high strength armour grade AA7075-T651 aluminium alloy. The tensile properties, such as yield strength, tensile strength, elongation and notch tensile strength, are evaluated and correlated with the microhardness and microstructural features. The scanning electron microscope is used to characterie the fracture surfaces. The solution treatment followed by ageing heat treatment cycle is found to be marginally beneficial in improving the tensile properties of friction stir welds of AA7075-T651 aluminium alloy.     

光纤通信系统用减反膜的研究

针对WDM光纤通信系统对具有极高透过率的光学薄膜元件的需要,系统地研究了增透膜的设计与镀制.采用统计实验求总极值法和Powell最小二乘法相结合的多级优化方法编制程序,完成了以BK7玻璃为基底的增透膜的膜系设计,采用多种监控方法完成了此类非规整膜系的镀制实验.测试结果表明,采用变过正量极值法监控非规整膜系的镀制,可精确控制各层膜的光学厚度,获得在1550nm波段附近具有很高透过率的光学薄膜元件.     

飞行器涂层防热选材、设计与应用

就防热材料选材、设计,主要是涂层设计原理和设计过程中需要考虑的一些问题浅谈了一些体会,对变密度非稳态的、有机/无机杂化防热涂层材料的热导率计算等参数辨识方法原理作了初步探讨,还介绍了几种热防护涂层(TPC)的性能、应用情况和防热效果.     

高速电弧喷涂FeCrBSiMnNbW非晶纳米晶涂层组织及性能

研究开发了一种FeCrBSiMnNbW新型喷涂粉芯丝材,并采用自动化高速电弧喷涂技术在镁合金基体上制备了FecrBsiMnNbw非晶纳米晶涂层。对Fe基非晶纳米晶涂层和传统的3Cr13涂层的组织结构、力学性能以及油润滑条件下的摩擦学性能进行了对比分析,结果表明：与3Cr13涂层相比,铁基非晶纳米晶涂层组织更加致密,孔隙率低,具有相对较高的硬度和拉伸结合强度;形成了非晶相和纳米晶相组成的复合结构,使得涂层具备更好的摩擦学性能。     

Zn-Al—Mg-RE高速电弧喷涂工艺过程的氧化行为分析

为分析高速电弧喷涂工艺制备Zn-Al-Mg-RE防腐涂层的氧化行为,通过XRD、SEM和EDS试验探究了喷涂工艺对该涂层氧化物的组成、含量及其形态的影响规律,并测试了涂层的中性盐雾腐蚀性能。结果发现：该涂层具有典型的层状结构特征,在相互叠加的扁平颗粒之间有很薄的氧化物膜,同时在扁平颗粒的内部也非均匀地分布着富氧化物区,XRD显示这些氧化物主要为ZnO2和尖晶石结构的ZnAl2O4与MgAl2O4等。分析认为：喷涂时液态金属熔滴在高速气流剪切力作用和反应热梯度作用下,加剧了Zn-Al-Mg-RE熔滴的氧化,这些交错分布的氧化物对合金相产生了较好的屏蔽效果,从而提高了涂层的耐蚀性能。     

AZ91D镁合金表面纳米TiO_2复合微弧氧化层耐蚀性能研究

为了提高AZ91D镁合金微弧氧化陶瓷层的耐蚀能力,采用Na2SiO3电解液,添加入纳米TiO2,经微弧氧化,纳米TiO2颗粒复合入陶瓷层中,形成表面质量良好的纳米复合陶瓷质氧化膜。通过与普通微弧氧化陶瓷层比较,结果表明：纳米TiO2复合微弧氧化陶瓷层孔隙率降低,致密性提高,抗盐雾腐蚀性能提高1倍以上。     

2-一致光滑Banach空间中k-严格伪压缩半群公共不动点的隐格式迭代算法

对于Banach空间中女一严格伪压缩半群的公共不动点给出了隐格式迭代算法,证明了一个强收敛定理,推广并扩展了相关结论。     

自动化电弧喷涂路径偏移间距的优化模型

基于电弧喷涂沉积丘的轮廓呈高斯分布的假设,并结合实验结果,建立了电弧喷涂沉积丘轮廓的数学模型,由此推导出了自动化喷涂过程中平行路径偏移间距这一重要参量的优化模型。该模型为合理规划自动化喷涂的路径提供了依据。