聚能射流形成过程的理论建模与分析

分析了聚能射流的形成过程,并对其中的各阶段进行了详细建模。在模型中考虑了炸药爆轰、金属的驱动、药型罩压垮以及射流和杵体的形成过程。采用该模型对某一聚能装药结构进行了计算,计算结果表明:药型罩顶部和底部微元的压垮速度较小,在射流头部形成反向速度梯度,与试验数据吻合较好。该模型对于多级侵彻战斗部的工程设计与侵彻参数的计算具有一定的参考价值。     

A Question of ‘Government’ Control: Afghanistan DDR Programs Since 2001

Since the fall of the Taliban in late 2001, the Islamic Republic of Afghanistan (GIRoA), the United States, the United Nations, and the International Security Assistance Force (ISAF) have funded and led three different Disarmament, Demobilization, and Reintegration (DDR) programs. Despite a significant investment in time and treasure, all of them have failed to significantly reduce the number of insurgents or arbaki (militia). This article explores why these programs failed despite incorporating ideas from the prominent DDR schools of thought. Utilizing Stathis Kalyvas’ theory of The Logic of Violence in Civil War as a lens, this article argues that GIRoA and ISAF did not have sufficient control of territory to entice insurgents or arbaki to reconcile and/or reintegrate with the government. Further, in areas GIRoA nominally controlled in northern and western Afghanistan, regional powerbrokers who controlled these areas balked at these programs.     

煤层气加气站火灾爆炸危险性分析及消防对策

根据太原市煤层气加气站的具体情况,从设备安全、规范化安全管理等方面分析了CNG加气站的火灾爆炸危险性,探讨煤层气加气站消防安全的技术措施及对策。     

运动潜体湍流尾迹的SAR遥感仿真研究

采用点源法获得密度层化海洋中运动潜体产生的速度场,使用计入海洋内部湍流对海表面毛细重力波作用的SAR遥感全谱模式,利用考虑内波混合的湍流k-ε模式,并且使用Nasmyth海洋普适谱,建立了运动潜体湍流尾迹的SAR遥感仿真模型.利用该仿真模型对Rankine卵形体的湍流尾迹进行了仿真分析,获得令人满意的结果.     

空化射流实验研究

空化水射流技术是将空化作用引入到高压水射流而形成的一种新型高压水射流技术,在同等条件下,空化射流相对于普通高压水射流具有破碎和切割能力更高的特点。通过数值模拟和实验方法对空化技术进行研究,进行了喷嘴流场的数值模拟计算,设计了空化射流实验装置及空化喷嘴。以生锈铁板为研究对象,分别进行了喷嘴型号、打击时间、入口压力、靶距和扩散段长度的空化射流打击效果对比实验,研究了空化参数对空化效果的影响。实验结果表明角形喷嘴进行淹没射流的空化效果较好,空化射流除锈具有最优打击时间。不同的入口压力对应不同的最佳靶距。     

The effects of model parameter deviations on the variance of a linearly filtered time series

We consider a general linear filtering operation on an autoregressive moving average (ARMA) time series. The variance of the filter output, which is an important quantity in many applications, is not known with certainty because it depends on the true ARMA parameters. We derive an expression for the sensitivity (i.e., the partial derivative) of the output variance with respect to deviations in the model parameters. The results provide insight into the robustness of many common statistical methods that are based on linear filtering and also yield approximate confidence intervals for the output variance. We discuss applications to time series forecasting, statistical process control, and automatic feedback control of industrial processes. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

基于层间嵌入式多级支持向量机的特征选择

针对多故障样本一次性映射之后分类不理想,研究了多级层次式支持向量机,应用UCI数据仿真,结果表明该方法缩短了训练时间、提升了测试准确率、改善了样本的可分类性。由于误差积累,在此基础上,提出了层间嵌入式多级支持向量机,采用Abalone数据仿真,结果表明分类精度有所提高并减少了分类步骤。结合ReliefF算法,对制导设备的故障特征参数进行了选择。     

狭长受限空间油气爆炸关键现象研究

以汽油油气混合物为研究对象,在狭长密闭管道中进行了油气爆炸实验,通过压阻式传感器测试爆炸过程中的压强信号,得到狭长受限空间中油气爆炸的基本参数。通过对实验结果的对比分析,发现狭长受限空间内的油气爆炸可以分为4个阶段：平滑加速阶段、湍流发展阶段、振荡激化阶段和余波阶段;一定强度的湍流流场可抑制链化学反应速度和火焰传播速度;振荡激化阶段发生在管道末端。为狭长密闭空间内油气爆炸的预防和抑爆技术研究提供了参考。     

不同温度阶段煤自燃的实验研究

通过对现今煤层自燃机理和防灭火技术现状分析,采用程序升温实验系统以及气相色谱仪等实验设备,以东山烟煤和芙蓉无烟煤两种煤为研究对象,利用加热炉实验系统,对两种煤样进行程序升温氧化试验和分析,通过氧气浓度的测定,分别计算得出耗氧速率等煤自燃特性参数,并分析得到两种煤样的临界温度和干裂温度,为更深入的煤氧化自燃实验研究提供依据和参考。     

Effect of wave shaper on reactive materials jet formation and its penetration performance

Wave shaper effect on formation behavior and penetration performance of reactive liner shaped charge (RLSC) are investigated by experiments and simulations. The reactive materials liner with a density of 2.3 g/cm³ is fabricated by cold pressing at a pressure of 300 MPa and sintering at a temperature of 380 °C. Experiments of the RLSC with and without wave shaper against steel plates are carried out at standoffs of 0.5, 1.0, and 1.5 CD (charge diameter), respectively. The experimental results show that the penetration depths and structural damage effects of steel plates decrease with increasing the standoff, while the penetration depths and the damage effects of RLSC without wave shaper are much greater than that with wave shaper at the same standoff. To understand the unusual experimental results, numerical simulations based on AUTODYN-2D code are conducted to discuss the wave shaper effect, including the propagation behavior of detonation wave, the velocity and temperature distribution of reactive jet, and penetration depth of reactive jet. The simulations indicate that, compared with RLSC without wave shaper, there is a higher temperature produced inside reactive jet with wave shaper. This unusual temperature rise effects are likely to be an important mechanism to cause the initiation delay time of reactive jet to decline, which results in significantly decreasing its penetration performance.