误差配准在两种纯距离定位算法的应用比较

组网雷达系统中,由于观测信息量的增加,对目标存在多种定位算法。很多情形下,误差配准公式是基于某一定位算法推导而来,误差配准的结果也相应的用来提高此定位算法的定位精度。定位算法的复杂程度不同导致基于此算法推导误差配准公式难度不一致,不同定位算法的定位精度也不尽相同。因此,对两种多距离定位算法的定位精度、误差配准推导难易程度进行了理论分析和仿真计算,给出了定位精度的解析表达式和仿真结果。利用表达式简单的定位算法推导基于最小二乘的误差配准公式,并将误差配准结果反馈给定位精度高的定位算法,以最大程度提高误差配准结果的应用效果,减轻计算复杂度,提高信息的利用度。     

压制式干扰条件下舰空导弹杀伤区远界的建模方法

从战场环境、空袭目标特性、舰空导弹武器系统的性能三个方面研究了杀伤区远界。首先利用综合信干比与最小可检测信噪比的关系建立了压制式干扰条件下制导雷达的探测距离模型;然后利用杀伤空域坐标系与攻击平面坐标系的关系,针对不同特性的空袭目标,分析了求解杀伤区远界的方法;在对垂直发射型舰空导弹弹道进行假设的基础上,利用比例导引弹道模拟了舰空导弹的飞行过程。仿真结果表明,该模型能较好的模拟舰空导弹的杀伤区远界。     

声速有限条件下的纯方位方法

针对纯方位条件下对等速直航目标运动要素的观测问题,考虑声音在海水中传播时间的作用,建立了计算可观测目标方位的解析公式。基于平均声速为有限常数的假设,证明了即使观测站静止,运动要素也一般是可观测的。在观测误差为独立同分布零均值正态随机误差的假设条件下,证明了由方位观测误差的最小二乘法给出的估计为极大似然估计。仿真实验表明,观测站转向及直航机动条件下此方法对应的目标运动要素的观测度较传统方法有显著改进。     

大气气溶胶对激光制导探测作用距离影响的数值分析

针对大气气溶胶辐射传输衰减效应是影响1.06μm激光武器系统性能的重要因素,探讨了大气气溶胶对1.06μm激光探测作用距离的影响,构建了激光制导波段探测作用距离模型,并在此基础上进行激光探测作用距离的大气气溶胶影响数值仿真。试验表明,基于该模型计算的大气透过特性准确度基本符合国际公认理论分析值,对作用距离的评估结果与客观实际基本相符,对最大限度分析利用战场气象环境以确保武器作战性能的充分发挥具有重要价值,可为激光探测作用距离的气象环境影响后续发展奠定一定基础。     

The effect of al particle size on thermal decomposition,mechanical strength and sensitivity of Al/ZrH2/PTFE composite

To study the thermal decomposition of Al/ZrH2/PTFE with different Al particle size as well as mechanical strength and impact sensitivity under medium and low strain rates, molding-vacuum sintering was adopted to prepare four groups of power materials and cylindrical specimens with different Al particle size. The active decomposition temperature of ZrH2 was obtained by TG-DSC, and the quasi-static me-chanics/reaction characteristics as well as the impact sensitivity of the specimen were studied respec-tively by quasi-static compression and drop-hammer test. The results show that the yield strength of the material decreased with the increase of the Al particle size, while the compressive strength, failure strain and toughness increased first and then decreased, which reached the maximum values of 116.61 MPa, 191％, and 119.9 MJ/m respectively when the Al particle size is 12—14μm because of particle size grading. The specimens with the highest strength and toughness formed circumferential open cracks and reacted partly when pressed. Those with developmental cracks formed inside did not react. It is considered that fracture of specimens first triggered initial reaction between Al and PTFE to release an amount of heat. Then ZrH2 was activated and decomposed, and participated in subsequent reaction to generate ZrC. The impact sensitivity of the specimens decreased with the increase of Al particle size.     

Micromechanical simulation and experimental investigation of aluminum-based nanocomposites

Ceramic reinforced metal matrix nanocomposites are widely used in aerospace and auto industries due to their enhanced mechanical and physical properties. In this research, we investigate the mechanical properties of aluminum/Nano-silica composites through experiments and simulations. Aluminum/Nano-silica composite samples with different weight percentages of silica nanoparticles are prepared via powder metallurgy. In this method, Nano-silica and aluminum powders are mixed and compressed in a mold, followed by sintering at high temperatures. Uniaxial tensile testing of the nanocomposite samples shows that adding one percent of Nano-silica causes a considerable increase in mechanical properties of nanocomposite compared to pure aluminum. A computational micromechanical model, based on a representative volume element of aluminum/silica nanocomposite, is developed in a commercial finite element software. The model employs an elastoplastic material model along with a ductile damage model for aluminum matrix and linear elastic model for nano-silica particles. Via careful determination of model parameters from the experimental results of pure aluminum samples prepared by powder metallurgy, the proposed computational model has shown satisfactory agreement with experiments. The validated computational model can be used to perform a parametric study to optimize the micro-structure of nanocomposite for enhanced mechanical properties.     

Effect of functionally-graded interphase on the elasto-plastic behavior of nylon-6/clay nanocomposites; a numerical study

In nanocomposites, the interphase thickness may be comparable to the size of nano-particles, and hence, the effect of interphase layers on the mechanical properties of nanocomposites may be substantial. The interphase thickness to the nano-particle size ratio and properties variability across the interphase thickness are the most important affecting parameters on the overall behavior of nanocomposites. In this study, the effect of properties variability across the interphase thickness on the overall elastic and elasto-plastic properties of a polymeric clay nanocomposite (PCN) using a functionally graded (FG) interphase is investigated in detail. The results of the computational homogenization on the mesoscopic level show that Young's modulus variation of the interphase has a significant effect on the overall elastic response of nanocomposites in a higher clay weight ratio (Wt). Moreover, strength variation through the interphase has a notable effect on the elasto-plastic properties of PCNs. Also, the increase or decrease in stiffness of interphase from clay to matrix and vice versa have a similar effect in the overall behavior of nanocomposites.     

Effect of the end cap on the fragment velocity distribution of a cylindrical cased charge

The prediction of the fragment velocity distribution of a cylindrical cased charge with end caps is one of the key issues to assess the damage efficiency of the warhead. However, limited work has been con-ducted to predict the fragment velocity distributions along the axis of cylindrical cased charges with end caps. This paper presents a study of the velocity distribution of fragments caused by the explosion of a cylindrical cased charge with end caps. The fragment velocity distribution and the end cap velocity were determined by an X-ray radiography method, and the axial fragment distribution was determined by witness plates. It was found that the velocities of fragments, especially near the edge, were increased when the end caps were added, and the position of maximum velocity is closer to the non-detonation end. The fragment velocities were increased, and the fragment projection range was decreased with the increase of the thickness of the end cap. A formula for fragment velocity distributions of a cylindrical cased charge with end caps, which is based on Huang's formula, was proposed by the theoretical analysis and data fitting and validated experimentally. The results indicate that the proposed formula is accurate in predicting the fragment velocity distribution along the axis of a cylindrical cased charge with end caps detonated at one end.     

Experimental and numerical investigations of interface properties of Ti6Al4V/CP-Ti/Copper composite plate prepared by explosive welding

Explosive welding technique is widely used in many industries. This technique is useful to weld different kinds of metal alloys that are not easily welded by any other welding methods. Interlayer plays an important role to improve the welding quality and control energy loss during the collision process. In this paper, the Ti6Al4V plate was welded with a copper plate in the presence of a commercially pure titanium interlayer. Microstructure details of welded composite plate were observed through optical and scanning electron microscope. Interlayer-base plate interface morphology showed a wavy structure with solid melted regions inside the vortices. Moreover, the energy dispersive spectroscopy analysis in the interlayer-base interface reveals that there are some identified regions of different kinds of chemical equilibrium phases of Cu–Ti, i.e. CuTi, Cu₂Ti, CuTi₂, Cu₄Ti, etc. To study the mechanical properties of composite plates, mechanical tests were conducted, including the tensile test, bending test, shear test and Vickers hardness test. Numerical simulation of explosive welding process was performed with coupled Smooth Particle Hydrodynamic method, Euler and Arbitrary Lagrangian-Eulerian method. The multi-physics process of explosive welding, including detonation, jetting and interface morphology, was observed with simulation. Moreover, simulated plastic strain, temperature and pressure profiles were analysed to understand the welding conditions. Simulated results show that the interlayer base plate interface was created due to the high plastic deformation and localized melting of the parent plates. At the collision point, both alloys behave like fluids, resulting in the formation of a wavy morphology with vortices, which is in good agreement with the experimental results.     

高温空气下C/SiC复合材料力学性能测试

测试了C/SiC复合材料在高温空气下的压缩、弯曲和拉伸性能,利用扫描电子显微镜分析复合材料在室温与高温条件下的断口微观形貌。结果表明:从室温升温到1 000 ℃测试温度时,C/SiC复合材料的压缩强度由247 MPa降低至78 MPa,性能降低68%;弯曲强度由480 MPa降低至277 MPa,性能降低42%;拉伸强度由247 MPa降低至152 MPa,性能降低38%。高温氧化导致界面退化,损伤材料基体与碳纤维结构,加剧了纤维断裂程度,改变了纤维与基体的结合状态,纤维增韧机制逐渐消失,导致复合材料性能下降。