基于遗传算法的跳频通信侦察技术

为了识别跳频序列,提出了采用遗传算法并结合跳频信号特点来完成跳频序列的分析与重组,从而实现跳频信号的侦察。在采用传统遗传算法的基础上,针对序列特点提出了5种改进手段,从而大大提高了算法的效率和可用性。最后利用采样的语音信号,对分析与重组过程进行模拟来验证算法的可行性。     

约束总体最小二乘空间配准算法

相对于单个雷达而言,组网雷达能显著提高其融合系统的性能,但是在随机误差较大情况下,由于空间配准精度往往较低,其融合性能会显著下降.在忽略模型线性化误差的情况下,分析出这一缺点出现的原因是量测方程的系数矩阵中存在误差,进而利用系数矩阵误差存在统计相关性的特点,提出一种基于地心地固坐标系(ECEF)的约束总体最小二乘算法进...     

调炮精度检测中双经纬仪优化布站方法

针对“双经纬仪法”检测调炮精度中随机布站使测量系统达不到最佳测量精度的问题,提出了一种优化布站方法.根据火炮调炮范围确定了调炮精度检测中的测量区域,推导出了双经纬仪测量系统对于该测量区域的平均测量不确定度公式.结合某型火炮设计了基于遗传算法的具体优化过程,对测量系统的3个位置参数进行优化,得到最佳测量布局,并通过仿真试...     

采用弹道修正技术的红外干扰弹性能优化

针对弹道修正弹的高维非线性特性导致的性能优化难题,改变概念设计阶段传统的串行设计方式,提出了一种基于实验设计(Design Of Experiments,DOE)和响应面(Response Surface Methodology,RSM)的智能优化算法,定义基本的弹丸结构模型以及相关的设计参数.在DOE的基础上,将设计...     

Multi-objectives nonlinear structure optimization for actuator in trajectory correction fuze subject to high impact loadings

This paper presents an actuator used for the trajectory correction fuze, which is subject to high impact loadings during launch. A simulation method is carried out to obtain the peak-peak stress value of each component, from which the ball bearings are possible failures according to the results. Subsequently, three schemes against impact loadings, full-element deep groove ball bearing and integrated raceway, needle roller thrust bearing assembly, and gaskets are utilized for redesigning the actuator to effectively reduce the bearings' stress. However, multi-objectives optimization still needs to be conducted for the gaskets to decrease the stress value further to the yield stress. Four gasket's structure parameters and three bearings' peak-peak stress are served as the four optimization variables and three objectives, respectively. Optimized Latin hypercube design is used for generating sample points, and Kriging model selected according to estimation result can establish the relationship between the variables and objec-tives, representing the simulation which is time-consuming. Accordingly, two optimization algorithms work out the Pareto solutions, from which the best solutions are selected, and verified by the simulation to determine the gaskets optimized structure parameters. It can be concluded that the simulation and optimization method based on these components is effective and efficient.     

Fuzzy recognition of missile borne multi-line array infrared detection based on size calculating

In order to improve the infrared detection and discrimination ability of the smart munition to the dy-namic armor target under the complex background, the multi-line array infrared detection system is established based on the combination of the single unit infrared detector. The surface dimension features of ground armored targets are identified by size calculating solution algorithm. The signal response value and the value of size calculating are identified by the method of fuzzy recognition to make the fuzzy classification judgment for armored target. According to the characteristics of the target signal, a custom threshold de-noising function is proposed to solve the problem of signal preprocessing. The multi-line array infrared detection can complete the scanning detection in a large area in a short time with the characteristics of smart munition in the steady-state scanning stage. The method solves the disadvan-tages of wide scanning interval and low detection probability of single unit infrared detection. By reducing the scanning interval, the number of random rendezvous in the infrared feature area of the upper surface is increased, the accuracy of the size calculating is guaranteed. The experiments results show that in the fuzzy recognition method, the size calculating is introduced as the feature operator, which can improve the recognition ability of the ground armor target with different shape size.     

Multi-objective design optimization of composite submerged cylindrical pressure hull for minimum buoyancy and maximum buckling load capacity

This paper presents the design optimization of composite submersible cylindrical pressure hull subjected to 3 MPa hydrostatic pressure. The design optimization study is conducted for cross-ply layups [0s/90t/0u], [0s/90t/0u]s, [0s/90t]s and [90s/0t]s considering three uni-directional composites, i.e. Carbon/Epoxy, Glass/Epoxy, and Boron/Epoxy. The optimization study is performed by coupling a Multi-Objective Genetic Algorithm (MOGA) and Analytical Analysis. Minimizing the buoyancy factor and maximizing the buckling load factor are considered as the objectives of the optimization study. The objectives of the optimization are achieved under constraints on the Tsai-Wu, Tsai-Hill and Maximum Stress composite failure criteria and on buckling load factor. To verify the optimization approach, optimization of one particular layup configuration is also conducted in ANSYS with the same objectives and constraints.     

链约束下加工时间恶化的Flow Shop排序问题

讨论作业具有线性加工时间,作业间具有链约束的两台处理机流水作业排序问题,目标函数为极小化完工时间。在作业加工时间简单线性恶化下,提出作业的非负开始和停止延迟恶化率,构造了满足约束条件的复合作业。在此基础上,给出作业间具有平行链约束的两台处理机流水作业排序问题的最优多项式算法。     

集成电路方波脉冲注入损伤效应实验研究

为了得到各损伤参数随脉宽的变化规律,寻找建立评价复杂EMP波形对集成电路损伤模型的依据,对2种典型的集成电路器件进行了方波脉冲注入损伤实验。结果表明:RAM6264损伤电压、电流及功率均随脉宽增大而减小,损伤能量处于某一小范围之内,可能属于能量损伤型器件;BG305损伤电压、功率随脉宽增大而减小,损伤能量随脉宽增大而增大,损伤电流处于某一个小范围之内,可能属于电流损伤型器件。     

方波注入对组合电路损伤效应研究

以某型雷达系统为试验对象,选取典型系统的组合电路,进行方波脉冲注入对比试验,研究了电磁脉冲对系统中组合电路的损伤规律。试验表明:电磁脉冲对组合电路的损伤与电路结构有关,损伤过程是一个渐变的过程,注入脉宽越大其损伤电压越小,能量可能是造成电路功能损伤或失效的主要因素。