加肋凹锥-环-柱结合壳结构参数分析

采用分区样条等参元法,分析了加肋凹锥 环 柱结合壳的应力和稳定性特点,研究了各项结构参数变化对结合壳应力和稳定性的影响,认为加肋凹锥 环 柱结合壳能有效降低锥柱结合部的纵向弯曲应力,但对于降低环向应力效果有限,建议在环壳段中部增加一档肋骨;半锥角的凹结合壳越大,嵌入环壳段的优势越明显;增大环壳与柱壳半径比可以有效降低环壳段中部的纵向弯曲应力.     

混凝土破障弹侵彻深度分析与计算方法

为了提高混凝土破障弹的威力,必须提高其侵彻深度。通过分析破障弹侵彻过程中各种阻力功及振动波耗能,提出了一种破障弹侵彻深度的计算方法,并结合制式弹丸进行了具体计算。     

联合编队作战行动方案建模

研究联合编队的作战行动方案问题,首先需要建立合理的任务模型。在基本作战样式基础上,针对联合编队任务特点,设计了一种联合编队作战行动方案的建模方法。该模型包含对海攻击和对空防御等5种基本作战样式,结合规划和调度两方面的特点,提供了资源和系统状态的描述机制。实例证明建模方案不仅具有可行性,而且丰富了作战行动方案的建模理论,对联合编队作战系统的研究、决策和建设具有一定的参考价值。     

纵桁对环肋圆柱壳体水下振动与声辐射的影响

采用结构有限元耦合流体边界元的附加质量附加阻尼算法,对具有不同数量纵桁的加筋环肋圆柱壳水下振动与声辐射噪声进行了数值计算,并对数值计算结果进行了初步的比较和分析,讨论了纵桁的数量对圆柱壳水下振动与声辐射的影响.结果表明:纵桁对圆柱壳水下的减振降噪有较好的效果,并且纵桁的数量越多,减振降噪效果越好,但增加纵桁的数量也相应增加了艇体的重量,在潜艇结构设计时须在降噪及艇体重量间综合权衡.     

考虑Reissner效应的功能梯度柱壳裂纹高阶渐近场

针对考虑Reissner效应的功能梯度柱壳裂纹问题,通过分离变量和级数展开法构造广义位移函数,求得了裂纹尖端高阶渐近场。结果表明：该解类似于Williams解,为此类问题的特征函数,能够描述此类材料各种含裂纹结构的整个应力场和位移场;材料非均匀性对高阶项有显著影响。     

某型火炮制退机节制环磨损故障分析与处理

制退机的性能好坏直接关系到火炮作战效能的发挥。针对目前装备保障方式大多停留在维修层面而理论研究不够深入的实际,对节制环磨损故障的机理进行分析。以某型火炮短节制杆式制退复进机为对象,利用MATLAB数值计算平台,编程仿真节制环磨损故障对后坐的影响。同时探讨了故障后对火炮的处理方案。研究表明,节制环磨损对后坐诸元都将产生不同影响,针对影响的程度可制定相应的故障处理方案。仿真模拟和方案探讨对装备保障工作具有参考意义。     

Signal‐to‐interference‐plus‐noise ratio estimation for wireless communication systems: Methods and analysis

The Signal‐to‐Interference‐plus‐Noise Ratio (SINR) is an important metric of wireless communication link quality. SINR estimates have several important applications. These include optimizing the transmit power level for a target quality of service, assisting with handoff decisions and dynamically adapting the data rate for wireless Internet applications. Accurate SINR estimation provides for both a more efficient system and a higher user‐perceived quality of service. In this paper, we develop new SINR estimators and compare their mean squared error (MSE) performance. We show that our new estimators dominate estimators that have previously appeared in the literature with respect to MSE. The sequence of transmitted bits in wireless communication systems consists of both pilot bits (which are known both to the transmitter and receiver) and user bits (which are known only by the transmitter). The SINR estimators we consider alternatively depend exclusively on pilot bits, exclusively on user bits, or simultaneously use both pilot and user bits. In addition, we consider estimators that utilize smoothing and feedback mechanisms. Smoothed estimators are motivated by the fact that the interference component of the SINR changes relatively slowly with time, typically with the addition or departure of a user to the system. Feedback estimators are motivated by the fact that receivers typically decode bits correctly with a very high probability, and therefore user bits can be thought of as quasipilot bits. For each estimator discussed, we derive an exact or approximate formula for its MSE. Satterthwaite approximations, noncentral F distributions (singly and doubly) and distribution theory of quadratic forms are the key statistical tools used in developing the MSE formulas. In the case of approximate MSE formulas, we validate their accuracy using simulation techniques. The approximate MSE formulas, of interest in their own right for comparing the quality of the estimators, are also used for optimally combining estimators. In particular, we derive optimal weights for linearly combining an estimator based on pilot bits with an estimator based on user bits. The optimal weights depend on the MSE of the two estimators being combined, and thus the accurate approximate MSE formulas can conveniently be used. The optimal weights also depend on the unknown SINR, and therefore need to be estimated in order to construct a useable combined estimator. The impact on the MSE of the combined estimator due to estimating the weights is examined. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

蒙特卡洛剖分投影法的爆震弹破片平均比动能评估

为了评估爆震弹封装壳体破片致死、致伤半径,并削弱其平均比动能,基于蒙特卡洛剖分投影法建立破片平均比动能计算模型。通过LS-DYNA及自编程联合仿真方法对爆震弹自然破片、半预制破片比动能计算模型进行仿真求解,获得了全破片全时域的质量分布、初始速度、垂直靶分布、平均比动能阈值及安全半径等指标。结果表明:在相同装药参数下,半预制破片相比于自然破片,质量分布、初始速度阈值更低且更集中;在小于等于2.5 m范围内半预制破片平均比动能阈值比自然破片更低,大于2.5 m后半预制破片平均比动能阈值比自然破片更高。相比于自然破片,采用半预制破片可显著减小爆震弹破片的致死半径,但并不能明显增大其安全半径。     

激光陀螺数字抖动控制方法与特性

针对传统的模拟抖动控制系统体积大、灵活性差的缺点,设计了一种基于单片机的新的激光陀螺数字抖动控制方法,建立了陀螺抖动的数学模型,比较研究了传统的模拟正弦波驱动和新的数字方波驱动的抖动特性,指出了后者不同于前者的抖幅变化律及非线性的随机噪声注入方式。仿真和实验证明,该方法能很好满足激光陀螺抖动控制要求,保证陀螺性能。     

高炮射弹飞行时间拟合

用插值拟合和最小二乘逼近拟合方法对高炮射弹飞行时间拟合问题进行了研究。通过对插值拟合公式原理及误差规律的分析,提出确定可用区间的"去值检验"方法,说明了插值拟合公式的应用范围。通过对最小二乘拟合公式实际计算结果的分析,得出了"拟合公式阶数取3为最佳"的结论。对其他口径高炮的射弹飞行时间拟合也基本适用。