基于轴对称内聚力单元的立贮发动机黏接界面结构完整性分析

建立轴对称内聚力单元是进行立贮发动机黏接界面应力分析的重要手段。在变形后的轴对称内聚力单元上建立参考坐标系,推导了单元节点位移在参考坐标系和全局坐标系下的转换关系。基于单元分离位移推导了单元内力矢量和单元刚度矩阵。开展了旋转体的分离测试,验证了轴对称内聚力单元的准确性和高效性。针对立贮发动机,先后开展了轴向加速度以及波浪载荷作用下的发动机结构分析,重点研究了黏接界面上应力的大小以及分布规律。研究方法和结论可以为发动机黏接界面结构分析提供有利参考。     

固体燃料冲压发动机飞行性能分析

固体燃料冲压发动机性能通过进气道与导弹飞行工况关联在一起,其工作过程需考虑导弹飞行参数对发动机性能的影响。与其它冲压发动机相比,固体燃料冲压发动机一个显著特点是推进剂燃烧过程不仅与推进剂配方、发动机结构和燃烧室压强有关,还取决于燃烧室入口空气参数,因此工作过程较为复杂。在国内首次建立固体燃料冲压发动机工作过程仿真模型,并分析导弹飞行马赫数和高度对发动机性能的影响规律。     

穿甲子弹偏心入射陶瓷/钢复合靶板试验

设计并进行了7.62mm穿甲子弹侵彻陶瓷/低碳钢复合靶板的弹道试验,得到了极限速度及陶瓷锥底部半径等数据。分析了锥底半径与入射速度、面板及背板厚度的关系,着重分析了偏心入射时靶板的抗弹机理。结果表明:陶瓷锥可分为破碎区和粉碎区,粉碎区半径约为面板厚度与弹丸半径之和;当弹着点距离陶瓷面板边缘大于5mm时,靶板的抗弹性能变化不大,而弹着点位于距陶瓷面板边缘小于5mm的板边区时,抗弹性能明显降低,靶板的有效防护面积应扣除板边区。     

比例最小偏度单形UKF的RBF神经网络算法

为提高RBF神经网络的建模性能,提出一种基于改进无迹Kalman滤波(UKF)的RBF神经网络训练算法。在该算法中,首先将比例最小偏度单形Sigma点采样策略引入UT,以有效改进UKF,提升其计算效率,然后利用改进的UKF优化估计RBF神经网络的最优参数。仿真结果表明,改进的UKF比EKF具有更高的RBF神经网络模型训练精度,与传统UKF的模型精度大体相当,但速度更快,计算效率更高。     

基于紧支径向基函数的固体域耦合数据传递方法

针对热-电场耦合仿真计算中非匹配网格之间的数据插值问题,提出了一种基于紧支径向基函数点插值的数据传递方法。推导了数据传递矩阵,根据所提出的数据传递方法编制了非匹配网格之间数据传递计算程序,以若干组非匹配网格之间的温度插值为例对本文所提方法进行了验证,并分析了不同参数对计算时间及精度的影响,结果表明,本文算法效率较高,计算误差较小,适用于以热-电场耦合为代表的固体域耦合非匹配网格间的数据传递计算。     

用紧支径向基函数传递固体域耦合数据的方法

针对热-电场耦合仿真计算中非匹配网格之间的数据插值问题,提出了一种基于紧支径向基函数点插值的数据传递方法。推导了数据传递矩阵,根据所提出的数据传递方法编制了非匹配网格之间数据传递计算程序,以若干组非匹配网格之间的温度插值为例进行了验证,并分析了不同参数对计算时间及精度的影响,结果表明,算法效率较高,计算误差较小,适用于以热-电场耦合为代表的固体域耦合非匹配网格间的数据传递计算。     

The probability of the existence of a feasible flow in a stochastic transportation network

Stochastic transportation networks arise in various real world applications, for which the probability of the existence of a feasible flow is regarded as an important performance measure. Although the necessary and sufficient condition for the existence of a feasible flow represented by an exponential number of inequalities is a well‐known result in the literature, the computation of the probability of all such inequalities being satisfied jointly is a daunting challenge. The state‐of‐the‐art approach of Prékopa and Boros, Operat Res 39 (1991) 119–129 approximates this probability by giving its lower and upper bounds using a two‐part procedure. The first part eliminates all redundant inequalities and the second gives the lower and upper bounds of the probability by solving two well‐defined linear programs with the inputs obtained from the first part. Unfortunately, the first part may still leave many non‐redundant inequalities. In this case, it would be very time consuming to compute the inputs for the second part even for small‐sized networks. In this paper, we first present a model that can be used to eliminate all redundant inequalities and give the corresponding computational results for the same numerical examples used in Prékopa and Boros, Operat Res 39 (1991) 119–129. We also show how to improve the lower and upper bounds of the probability using the multitree and hypermultitree, respectively. Furthermore, we propose an exact solution approach based on the state space decomposition to compute the probability. We derive a feasible state from a state space and then decompose the space into several disjoint subspaces iteratively. The probability is equal to the sum of the probabilities in these subspaces. We use the 8‐node and 15‐node network examples in Prékopa and Boros, Operat Res 39 (1991) 119–129 and the Sioux‐Falls network with 24 nodes to show that the space decomposition algorithm can obtain the exact probability of these classical examples efficiently. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 479–491, 2016     

一个具有相互独立、不同分布服务时间序列的排队模型

讨论的排队模型 ,放宽了GI/G/1系统中“服务时间独立同分布”的限制 ,只要求各服务时间相互独立 ,因而较GI/G/1排队模型能更合理地拟合实际问题 .在此较宽的条件下 ,利用补充变量的方法 ,求得了该排队系统队长的瞬时分布     

三维实验固体火箭冲压发动机燃烧室湍流反应流数值模拟

在对固体火箭冲压发动机的研究中 ,建立合适的数学模型对其内部工作过程进行模拟是冲压发动机设计和试验的重要环节。本文在三维湍流反应流情况下 ,对某实验固体火箭冲压发动机建立了数学模型并进行数值求解 ,得出了一些有用的结论 ,为冲压发动机的设计和实验提供了有用的理论研究基础     

Generalizing the survival signature to unrepairable homogeneous multi‐state systems

The notion of signature has been widely applied for the reliability evaluation of technical systems that consist of binary components. Multi‐state system modeling is also widely used for representing real life engineering systems whose components can have different performance levels. In this article, the concept of survival signature is generalized to a certain class of unrepairable homogeneous multi‐state systems with multi‐state components. With such a generalization, a representation for the survival function of the time spent by a system in a specific state or above is obtained. The findings of the article are illustrated for multi‐state consecutive‐k‐out‐of‐n system which perform its task at three different performance levels. The generalization of the concept of survival signature to a multi‐state system with multiple types of components is also presented. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 593–599, 2017