Increasing of photostability of HNS explosive in the presence of UV photostabilizers

The photostabilies of hexanitrostillbene(HNS)were studied at 1％wt.of photostabilizers.The photo-stabilizers of Chiguard BP-12(UV-531),ADK STAB LA-326(UV-326),ADK STAB LA-32(UV-P),Irganox 1010 and Everstab LS944 were used in this study.A photoreactor including a 30 W monochromatic UV lamp was used for investigation of photodegradations of solid HNS.The changes in surface area of HNS peak in HPLC chromatogram at time intervals of 2,4,6 and 8 h were used for calculation of kinetic rate constants of photodegradation process.The compound of UV-P photostabilizer was found to have the greatest effect on enhancing photostability for HNS among the investigated photostabilizers.The kinetic rate constants were obtained 6.2 × 10-2 and 4.1 × 10-2 h-1,respectively,for photodegradation process of HNS in absence and in presence of UV-P.     

Mechanical behavior and failure mechanism of polyurea nanocomposites under quasi-static and dynamic compressive loading

Polyurea is an elastomeric material that can be applied to enhance the protection ability of structures under blast and impact loading.In order to study the compressive mechanical properties of SiC/polyurea nanocomposites under quasi-static and dynamic loading,a universal testing machine and split Hop-kinson pressure bar(SHPB)apparatus were used respectively.The stress-strain curves were obtained on polyurea and its composites at strain rates of 0.001-8000 s-1.The results of the experiment suggested that increase in the strain rates led to the rise of the flow stress,compressive strength,strain rate sensitivity and strain energy.This indicates that all of the presented materials were dependent on strain rate.Moreover,these mechanical characters were enhanced by incorporating a small amount of SiC into polyurea matrix.The relation between yield stress and strain rates were established using the power law functions.Finally,in order to investigate the fracture surfaces and inside information of failed specimens,scanning electron microscopy(SEM)and micro X-ray computed tomography(micro-CT)were used respectively.Multiple voids,crazes,micro-cracks and cracking were observed in fracture surfaces.On the other hand,the cracking propagation was found in the micro-CT slice images.It is essential to understand the deformation and failure mechanisms in all the polyurea materials.     

Hazard evaluation of ignition sensitivity and explosion severity for three typical MH2 (M＝Mg,Ti, Zr) of energetic materials

MgH2, TiH2, and ZrH2 are three typical metal hydrides that have been gradually applied to composite explosives and propellants as additives in recent years. To evaluate ignition sensitivity and explosion severity, the Hartmann device and spherical pressure vessel were used to test ignition energy and ex-plosion pressure, respectively. The results showed that the ignition sensitivity of ZrH2, TiH2 and MgH2 gradually increased. When the concentration of MgH2 is 83.0 g/m3 in Hartmann device, the ignition energy attained a minimum of 10.0 mJ. The explosion pressure of MgH2 were 1.44 times and 1.76 times that of TiH2 and ZrH2, respectively, and the explosion pressure rising rate were 3.97 times and 9.96 times that of TiH2 and ZrH2, respectively, through the spherical pressure vessel. It indicated that the reaction reactivity and reaction rate of MgH2 were higher than that of TiH2 and ZrH2. In addition, to conduct in-depth theoretical analysis of ignition sensitivity and explosion severity, gas production and combus-tion heat per unit mass of ZrH2, TiH2 and MgH2 were tested by mercury manometer and oxygen bomb calorimetry. The experimental results revealed that MgH2 had a relatively high gas production per unit mass (5.15 mL/g), while TiH2 and ZrH2 both had a gas production of less than 2.0 mL/g. Their thermal stability gradually increased, leading to a gradual increase in ignition energy. Furthermore, compared with theoretical combustion heat, the combustion ratio of MgH2, TiH2 and ZrH2 was more than 96.0%, with combustion heat value of 29.96, 20.94 and 12.22 MJ/kg, respectively, which was consistent with the explosion pressure and explosion severity test results.     

国外动能轨道武器概念与发展动向

空间即将成为下一个战场,国外正在空间迅猛发展与应用日趋成熟的动能武器。介绍了国外动能轨道武器的基本概念、组成与发展现状,讨论了动能轨道武器的地位与作用,分析了国外动能轨道武器发展需求、能对付的目标威胁及其关键技术。     

Hilbert-Huang变换能量谱在轴承故障诊断中的应用

H ilbert-Huang变换是先把时间序列信号用经验模态分解方法分解成不同特征时间尺度的固有模态函数,然后经过H ilbert变换获得频谱的信号处理新方法。介绍了该方法的基本原理,并将H ilbert-Huang变换的能量谱应用于轴承故障诊断,轴承故障实验信号的研究结果表明:H ilbert-Huang变换的能量谱分析方法,能有效地诊断轴承的故障。     

线性方程组二级迭代法的收敛速度

二级迭代法由内、外迭代和内迭代次数三部分组成。给出了线性方程组二级迭代法R1-收敛因子的一个上界,这个上界由内、外迭代的R1-收敛因子和内迭代次数所决定,其主部为外迭代的R1-收敛因子。在矩阵单调性条件下,对于任何内迭代方法和任意内迭代次数,证明了外迭代的R1-收敛因子也是二级迭代法R1-收敛因子的下界。所得结果反映了内、外迭代的收敛速度以及内迭代次数对于二级迭代法收敛速度的综合影响。     

Single machine scheduling with a restricted rate‐modifying activity

In this paper we consider the problem of scheduling a set of jobs on a single machine on which a rate‐modifying activity may be performed. The rate‐modifying activity is an activity that changes the production rate of the machine. So the processing time of a job is a variable, which depends on whether it is scheduled before or after the rate‐modifying activity. We assume that the rate‐modifying activity can take place only at certain predetermined time points, which is a constrained case of a similar problem discussed in the literature. The decisions under consideration are whether and when to schedule the rate‐modifying activity, and how to sequence the jobs in order to minimize some objectives. We study the problems of minimizing makespan and total completion time. We first analyze the computational complexity of both problems for most of the possible versions. The analysis shows that the problems are NP‐hard even for some special cases. Furthermore, for the NP‐hard cases of the makespan problem, we present a pseudo‐polynomial time optimal algorithm and a fully polynomial time approximation scheme. For the total completion time problem, we provide a pseudo‐polynomial time optimal algorithm for the case with agreeable modifying rates. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005     

基于HLA的地基动能武器作战仿真研究

在分析地基动能武器作战方式的基础上,提出了仿真的基本思路;对仿真中的主动段方案设计、中段飞行和末段飞行3类关键数学模型进行了建模分析;最后基于HLA对地基动能武器仿真系统进行了设计.     

超宽谱电磁脉冲与无线电引信能量耦合因素的研究

通过超宽谱对配用不同弹体的无线电引信的辐照,分析了不同弹体以及配用某种弹体的引信不同放置方向对超宽谱电磁脉冲与无线电引信能量耦合的影响,并分析了弹体大小对能量耦合的影响。通过辐照、分析和计算最终得出:弹体是影响能量耦合的主要因素。弹体口径越大,超宽谱电磁脉冲与无线电引信的耦合能量越大。另外,配用弹体引信的不同放置方向也是影响能量耦合的重要因素;配用弹体的引信竖直放置时,超宽谱电磁脉冲与无线电引信的耦合能量最大。