加肋凹锥-环-柱结合壳结构参数分析

采用分区样条等参元法,分析了加肋凹锥 环 柱结合壳的应力和稳定性特点,研究了各项结构参数变化对结合壳应力和稳定性的影响,认为加肋凹锥 环 柱结合壳能有效降低锥柱结合部的纵向弯曲应力,但对于降低环向应力效果有限,建议在环壳段中部增加一档肋骨;半锥角的凹结合壳越大,嵌入环壳段的优势越明显;增大环壳与柱壳半径比可以有效降低环壳段中部的纵向弯曲应力.     

地基不均匀沉降后的某框架结构安全性分析

由于某框架结构在施工过程中发生了明显的不均匀沉降,结构体可能存在安全隐患。为此,对该框架结构进行了现场检测,根据检测结果,应用大型有限元软件ANSYS对地基变形后的结构安全性进行分析,合理评价了结构性能,其工程经验可供参考。     

The mechanism of liquid dispersing from a cylinder driven by central dynamic shock loading

A systematic investigation on the mechanism of dynamic liquid dispersing process via theoretical and experimental approach is presented. The experiments include weak and strong constrained scenarios using the high-speed camera technique and the flash X-ray radiography technique. Based on dynamic analysis, one-dimensional characteristics analysis and some numerical simulations on the propagating processes of blast waves before the container shell rupturing, further and detailed analyses of the experimental results are presented. The effects of the liquid viscosity on the dynamic dispersing flow are also analyzed, and the spall fracture mechanism is explored. Thus, the dominating forces determining the dispersing liquid flow are revealed, that is, the stretching and shearing action due to the interaction of two reflecting rarefaction waves in opposite propagating directions. The influence of container shell strength on the dispersing liquid flow is also investigated, and the characters of cavitation layered in liquid before shell rupturing are uncovered. Results revealed that different shell material results in different cavitating layers. Then the different cavitating layers drive the different dynamic liquid dispersing process coming into being. The metastable liquid states caused by pressure drop and cavi-tation generation are discussed.     

梁纯弯曲的大变形分析

在平面应力问题中 ,分析了在梁端截面作用沿高度线性分布外力时纯弯梁大变形的几何非线性问题。给出了纯弯曲应力的精确解 ,并用欧拉法得到了位移的近似解。当泊桑比为零时 ,求得位移的精确解。     

航空轮胎用橡胶弹性体Mullins效应动态加载方法

航空轮胎用橡胶弹性体在服役过程中遭受严苛的动态循环工况。为了研究弹性体在此工况下的力学响应特征和损伤机理,提出基于应力波作用的Mullins效应动态加载实验方法。根据应力波传导与作用特征,采用Hopkinson压杆加载思路,设计和配置了各单元尺寸参数,进而搭建可用于橡胶弹性体材料动态循环加载的实验系统,并开展了航空轮胎用丁苯橡胶的动态循环加载试验。基于试验信号分析发现：加载系统实现了弹性体材料Mullins效应动态应变递增的试验加载。最后开展加载测试参数的影响因素分析,结果表明通过优化系统各单元可实现Mullins效应的动态加、卸载参数的控制。     

磁流变液剪切屈服应力模型的理论分析与实验

剪切屈服应力是评价磁流变液流变性能的最重要参数,建立全面、准确的磁流变液剪切屈服应力模型对于反映磁流变液的流变学本质及磁流变液的工程应用都具有重要意义。在分析磁流变液微观结构的基础上,采用电磁力学与流体动力学相结合的方法,建立了磁流变液的剪切屈服应力模型,并在自行研制的磁流变液剪切屈服应力测试装置上对自制的磁流变液进行了实验测试,验证了模型的正确性。     

基于步进应力加速老化和改进Arrhenius模型的橡胶贮存寿命预测

为准确、快速地预测橡胶的贮存寿命,在步进高温应力加速老化试验的基础上,对不同加速温度下的加速系数进行计算,获得加速因子和绝对温度倒数的曲线,发现橡胶老化过程表现出非Arrhenius特性。针对非Arrhenius特性,引入幂指数因子,采用一种改进的Arrhenius模型对加速系数进行拟合。由对数反应速率与绝对温度倒数曲线的斜率,计算了改进Arrhenius模型在不同温度下的等效线性活化能,结果表明低温下活化能减小。建立低温下的老化寿命模型,对胶料在10℃,20℃和30℃下的老化寿命进行评估。评估结果表明,该模型可为相关高分子材料腐蚀过程中呈现的非Arrhenius特性的分析及寿命预测提供参考。     

Military and Veterans’ Health,Health Care,and Wellbeing

Abstract

The U.S. Department of Defense (DoD) and the U.S. Department of Veterans Affairs (VA) need to bridge a gap in their understanding of service members’ health outcomes and the issues involved in treatment, such as cost. In addition, clinicians and policy analysts must overcome existing knowledge barriers. Clinicians need to be aware of policy changes that will affect their patient load in numbers and in treatment needs. Policy analysts need to be aware of issues relevant to clinical treatment, such as quality and timeliness of care. Given the need for services and support to military personnel and families, and the fact that the fastest growing expenses in defense are health care costs, a multi-disciplinary line of research will help lawmakers understand the most efficient and effective resource use across the health care services.     

Reliability inference for field conditions from accelerated degradation testing

Accelerated degradation testing (ADT) is usually conducted under deterministic stresses such as constant‐stress, step‐stress, and cyclic‐stress. Based on ADT data, an ADT model is developed to predict reliability under normal (field) operating conditions. In engineering applications, the “standard” approach for reliability prediction assumes that the normal operating conditions are deterministic or simply uses the mean values of the stresses while ignoring their variability. Such an approach may lead to significant prediction errors. In this paper, we extend an ADT model obtained from constant‐stress ADT experiments to predict field reliability by considering the stress variations. A case study is provided to demonstrate the proposed statistical inference procedure. The accuracy of the procedure is verified by simulation using various distributions of field stresses. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006.     

地下工程预备口开挖的静力有限元分析

预备口对提高地下工程的生存能力有着重要影响,针对其特殊构造形式,运用有限元软件ANSYS进行三维数值模拟,分析预备口开挖过程中围岩应力和变形的分布规律。开挖过程中,围岩应力及时释放并重新分布,拱顶下沉变形最大,侧墙中点横向变形较明显;侧墙与底板交界处应力集中,预留掌子面处应力和轴向变形较其他断面要弱。为今后的施工提供借鉴。为今后的施工提供借鉴。