基于探索性分析法仿真的建模方法研究

针对探索性分析法的主要特点,探讨建立适合探索性分析法仿真的模型问题.提出了通过分解和校准建立多分辨率模型的方法,该方法包括对低分辨率模型的校准、对高分辨率模型的分解以及输入参数的取值方法,很好地解决了模型的实用以及模型的有效性问题,为探索性分析法仿真的应用提供了具体的方法指导.     

Technical note: Some structural results on acyclic supply chains

We consider acyclic supply chains under the full backorder assumption and reveal several simple yet unique properties. Most interestingly, we identify conditions for the best dedicated stocking policy to outperform the best shared stocking policy, and for an acyclic supply chain to be decomposable into a simpler network (e.g., tree). We specify ways to decompose them. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

信号稀疏分解理论在轴承故障检测中的应用

将信号稀疏分解理论引入到轴承故障检测问题中,提出新的轴承故障检测方法。通过字典学习的方式可有效实现轴承正常状态振动信号稀疏表示的超完备字典。利用该字典只适用于轴承正常状态信号稀疏分解的特点,将待分析信号在该字典上展开,通过比较信号稀疏表示误差与所设定阈值的关系来判断轴承对应的状态,从而实现轴承的故障检测。实验结果表明:当误差阈值设置合理时,该方法可有效地判断出轴承是否发生故障。     

某单兵无人车载系统电子稳像多分辨率塔式算法

在原有电子稳像算法基础上引入塔式分解,探索满足某单兵无人车载系统中稳像需求的算法,提出电子稳像多分辨率塔式算法.重点介绍了高斯塔和小波塔的构建方法,给出了塔式分解实验结果,并与未进行塔式分解稳像过程进行比较,从而得出此算法大大节省运算时间,提高了系统稳像的实时性,在特定应用环境中具有重要现实意义.     

Optimal empty vehicle redistribution for hub‐and‐spoke transportation systems

This article considers the empty vehicle redistribution problem in a hub‐and‐spoke transportation system, with random demands and stochastic transportation times. An event‐driven model is formulated, which yields the implicit optimal control policy. Based on the analytical results for two‐depot systems, a dynamic decomposition procedure is presented which produces a near‐optimal policy with linear computational complexity in terms of the number of spokes. The resulting policy has the same asymptotic behavior as that of the optimal policy. It is found that the threshold‐type control policy is not usually optimal in such systems. The results are illustrated through small‐scale numerical examples. Through simulation the robustness of the dynamic decomposition policy is tested using a variety of scenarios: more spokes, more vehicles, different combinations of distribution types for the empty vehicle travel times and loaded vehicle arrivals. This shows that the dynamic decomposition policy is significantly better than a heuristics policy in all scenarios and appears to be robust to the assumptions of the distribution types. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

采用张量方法的盲干扰抑制及信源恢复技术

针对多输入多输出系统受到有意干扰情况下的盲干扰抑制和信源恢复问题，提出一种双阵列天线接收机结构，通过差分处理，在不考虑独立性的条件下实现盲干扰抑制。消除干扰后的数据有明显的张量切片特征，将其堆积成三阶张量，并通过基于张量分解的方法不经信道估计直接恢复源信号，相较于传统基于信道估计的信源恢复方法大大降低信道估计误差的影响，提高恢复精度。仿真结果表明，所提方法较传统基于训练序列进行信道估计的方法能以更小的训练开销达到更优的信号恢复性能。     

网络异构信息的张量分解聚类方法

提出基于张量分解的聚类算法,能够同时处理网络中多类型、多语义关系的异构信息。网络信息体系中的各种异构信息被建模为一个多维张量,异构信息之间丰富的语义关系建模为张量中的元素。提出有效的张量分解方法,将不同类型的信息对象一次性划分到不同的簇中。在人工合成的数据集和真实数据集上的实验结果表明:该聚类方法可以很好地处理网络信息体系中的异构信息聚类问题,并且性能优于现有的聚类方法。     

基于降低运算复杂度的子空间跟踪算法稳健性分析

FDPM和FOOJA是目前两种最为有效的适用于主、次子空间跟踪的方法,属于低复杂度算法。进一步降低算法运算复杂度,对保证算法的实时性具有非常重要的意义。以降低算法运算复杂度为背景,通过对FDPM、FOOJA算法的分析,指出存在两种简化运算量的FDPM1stcol、FOOJA1stcol方法。在有限精度运算条件下,对四种方法的稳定性、数值鲁棒性进行了深入分析和讨论。通过实验仿真,对分析的结论进行了验证。     

Hilbert谱分析和平稳度

提出了本征模式函数IMF成员相应的幅度及频率时间函数的计算方法。由函数的Hilbert谱可获得相关的边缘谱,边缘谱确定了几乎连续的能量分布,从而提供了通过每个频率值测量总能量的方法。根据能量-频率-时间分布,就可以定量确定平稳性,平稳性是物理过程的一个复杂属性,其由平稳度DS和统计平稳度DSS进行度量,同时给出了DS和DSS的计算公式。     

Estimation of the kinetic parameters for thermal decomposition of HNIW and its adiabatic time-to-explosion by Kooij formula

A differential/integral method to estimate the kinetic parameters (apparent activation energy E_a and pre-exponential factor A) for thermal decomposition reaction of energetic materials based on Kooij formula are applied to study the nonisothermal decomposition reaction kinetics of hexanitrohexaazaisowurtzitane (HNIW) by analyzing nonisothermal DSC curve data. The apparent activation energy (E_a) obtained by the integral isoconversional non-isothermal method based on Kooij formula is used to check the constancy and validity of apparent activation energy by the differential/integral method based on Kooij formula. The most probable mechanism function of thermal decomposition reaction of HNIW is determined by a logical choice method. The equations for calculating the critical temperatures of thermal explosion (T_b) and adiabatic time-to-explosion (t_TIad) based on Kooij formula are used to calculate the values of T_b and t_TIad to evaluate the thermal safety and heat-resistant ability of HNIW. All the original data needed for analyzing the kinetic parameters are from nonisothermal DSC curves. The results show that the kinetic model function in differential form and the values of E_a and A of decomposition reaction of HNIW are 3(1 − α)[−ln(1 − α)]^2/3, 152.73 kJ mol⁻¹ and 10^11.97 s⁻¹, respectively, and the values of self-accelerating decomposition temperature (T_SADT), T_b and t_TIad are 486.55 K, 493.11 K and 52.01 s, respectively.