电子时间引信检测仿真试验研究

为提高电子时间引信的检测能力，介绍了电子时间引信检测仿真试验，分析了仿真试验的原理，给出了检测仿真试验的试验方法。经实际检测表明，该检测仿真试验能够安全可靠地完成电子时间引信的日常检测任务。     

Estimating failure time distribution and its parameters based on intermediate data from a Wiener degradation model

Instead of measuring a Wiener degradation or performance process at predetermined time points to track degradation or performance of a product for estimating its lifetime, we propose to obtain the first‐passage times of the process over certain nonfailure thresholds. Based on only these intermediate data, we obtain the uniformly minimum variance unbiased estimator and uniformly most accurate confidence interval for the mean lifetime. For estimating the lifetime distribution function, we propose a modified maximum likelihood estimator and a new estimator and prove that, by increasing the sample size of the intermediate data, these estimators and the above‐mentioned estimator of the mean lifetime can achieve the same levels of accuracy as the estimators assuming one has failure times. Thus, our method of using only intermediate data is useful for highly reliable products when their failure times are difficult to obtain. Furthermore, we show that the proposed new estimator of the lifetime distribution function is more accurate than the standard and modified maximum likelihood estimators. We also obtain approximate confidence intervals for the lifetime distribution function and its percentiles. Finally, we use light‐emitting diodes as an example to illustrate our method and demonstrate how to validate the Wiener assumption during the testing. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

一次性化学电池动态输出特性光电耦合测量法

提出了装备用一次性化学电池动态输出特性的光电耦合测量法。该方法采用独立电源供电,工作安全可靠,系统标定和数据采集、处理及结果输出等均由计算机控制完成,具有良好的操作环境,并且可在电动高旋机上使用,也可以用于对各种电压信号远距离遥测。     

基于状态变换的数字电路冗余确认研究

以状态跳变图为基础,深入分析了冗余变换与非法变换的特征,提出结构冗余和功能冗余的概念,并讨论了可测故障、不可测故障和冗余之间的联系.最后结合验证和测试生成,提出状态冗余的隐含遍历确认策略.     

装甲车辆起动电动机综合试验台

采用较先进的磁粉制动器作为电机的负载,使电机加载平稳、可靠、恒定,并可连续调节负载大小;同时采用高精度的ZJ型转矩转速传感器并配合转矩转速仪,不但能测量电机稳态时的转矩、转速和功率,同时还可测试电机某一过渡过程中转矩、电流、转速随时间变化的数值并贮存或打印.     

Al-Mn 多层膜离子束混合

离子束混合是一种材料改性和新材料研制的有效方法,本实验用Ａｒ＋离子束对Ａｌ－Ｍｎ多层薄膜在室温下进行轰击使其非晶化,并对样品电阻率随离子注入剂量及温度的变化关系进行原位测量．电阻温度系数ＴＣＲ和ＴＥＭ观测证实了样品离子束混合后电性能和结构发生改变生成了非晶相．     

A computation procedure for the exact solution of location-allocation problems with rectangular distances

A method is presented to locate and allocate p new facilities in relation to n existing facilities. Each of the n existing facilities has a requirement flow which must be supplied by the new facilities. Rectangular distances are assumed to exist between all facilities. The algorithm proceeds in two stages. In the first stage a set of all possible optimal new facility locations is determined by a set reduction algorithm. The resultant problem is shown to be equivalent to finding the p-median of a weighted connected graph. In the second stage the optimal locations and allocations are obtained by using a technique for solving the p-median problem.     

电力谐波及其对电能计量的影响

非线性用户的增多,使电网中谐波含量不断增加,对电能准确计量带来较大影响。针对上述情况,首先叙述了谐波的主要来源,从计量仪表的频率特性曲线角度,分析了谐波条件下感应式电能表和电子式电能表的误差变化情况,指出现有计量方式的不足,提出了改进计量方式的措施。     

雷达网抗干扰性能综合评估指标

如何对雷达网的抗干扰性能进行评估一直是国内外的研究热点之一。从雷达网的战术功能总体需求出发,指出可以根据雷达网在干扰前后的情报信息提供能力的变化来进行评估,然后结合对雷达网内部影响其抗干扰性能的各因素分析,并考虑到外场实际开展对雷达网抗干扰性能试验评估的需求,在现有评估指标的基础上,提出用于综合评估雷达网抗干扰性能的指标。     

用电化学方法评价油膜防锈性能

用电位—时间、多重动电位扫描两种电化学方法对防锈油的防护性能进行了分析和评价 ,并与盐水浸渍试验进行了对照。结果表明 :两种电化学方法不仅与盐水浸渍试验具有良好的相关性 ,而且能够反映油膜下金属腐蚀的细微特征 ,是研究和评价防锈油较好的方法