火控系统故障诊断与性能检测设备研究

从设备主要功能、设备硬件设计、检测软件及故障诊断软件设计等方面,系统地分析了检测设备的总体设计方案,功能特点,信号采集、处理与控制等。设计过程突出了理论与实践相结合的设计理念,针对某型火控系统的特点,结合实际研制过程,该方法具有较好的应用推广价值。     

基于TCP Veno算法的异构网络边界代理改进机制研究

针对在异构网络环境下无线网络的特点使TCP性能下降的问题,借鉴TCP Veno算法原理,提出基于网络状况评估的拥塞控制的性能增强代理改进工作机制,动态评估当前网络的状况,调整预应答发送窗口的阈值,提高性能增强代理在较大差异网络下的传输控制效能．基于NS-2的网络仿真测试对算法进行了验证,结果显示改进后的工作机制在丢包率较大的异构网络中性能有明显提升．     

基于灰色系统理论的军队油料节约人员360度绩效评估

基于360度绩效评估理论,从德、能、勤、绩4个方面构建了包含4个1级指标和16个2级指标的军队油料节约人员360度绩效评估指标体系。利用层次分析法确定了各评估指标的权重,运用灰色系统理论的原理和方法,构建了多层次灰色评估模型,并对某油料节约小组5位油料节约人员进行了360度绩效评估。案例应用表明,此方法具有系统综合各层评估者提供的"贫信息"的优点,不仅能得出被评估者的灰类及优劣顺序,而且得到了各指标所属灰类和具体的灰色评价权值,使360度绩效较好地实现了绩效反馈的目的。该研究为军队油料节约人员绩效管理工作提供了新的思路和方法。     

棉纤维热解特性及阻燃机理研究

用有机磷系阻燃剂Pyrovatex CP以及尿素、二氰二胺和三聚氰胺3种氮系的协效剂组成的整理液对纯棉织物进行阻燃处理,利用热重仪对其热解特性进行研究,通过分析TG-DTG曲线,研究了阻燃剂对棉纤维热解过程的影响,并对协效剂的协效效果进行了比较分析.结果表明,棉纤维热解主要分3个阶段;阻燃剂使棉纤维的起始分解温度降低,剩炭率提高;在磷氮比固定为1：0.1的情况下,尿素的协效作用相对最好,并对其阻燃机理进行了探讨.     

基于删除平均的VI-CFAR检测器

针对MLVI-CFAR检测器在多个随机分布干扰目标背景下检测性能不好,以及OSVI-CFAR检测器在均匀环境和仅单滑窗存在干扰目标的环境下检测性能欠佳问题,提出了一种基于删除平均(CML)的VI-CFAR检测器(CMLVI-CFAR).仿真验证了CMLVI-CFAR检测器在均匀背景及多目标干扰环境下,都具有比MLVI和OSVI-CFAR检测器好的检测性能,并且其在杂波边缘背景下的虚警控制能力与前两者也基本一致,说明其在实际杂波环境中具有更强的鲁棒性和良好的应用潜力.     

利用深度学习的硬件计数器复用估计算法

利用深度学习方法,为硬件计数器复用(multiplexing,MPX)提供结果精度更高的估计模型。通过对MPX估计得到的结果与实际采集的真实数据进行相似性分析,证明相同程序多次运行之间得到的硬件计数值是线性相关的。采用神经网络多层感知器(multilayer perceptron,MLP)和双向门控神经网络(bidirectional gated recurrent unit, Bi-GRU)这2种深度学习模型,对MPX数据进行拟合。基于动态时间规整(dynamic time warping, DTW),提出一个全新的评估MPX数据精度的指标DTW-cost。实验结果表明,同时收集15个硬件事件数据时,MLP方法拟合得到的13个高性能计算应用平均准确率比现有使用最广的固定插值法高出10.53%,最多可提升19.8%;而在MLP表现较差的事件上,Bi-GRU方法得到的平均准确率提升了28.8%。     

Tuning the reactivity of Al–Ni by fine coating of halogen-containing energetic composites

In this paper, various core-shell structured Al–Ni@ECs composites have been prepared by a spray-drying technique. The involved ECs refer to the energetic composites (ECs) of ammonium perchlorate/nitrocellulose (AP/NC, NA) and polyvinylidene fluoride/hexanitrohexaazaisowurtzitane (PVDF/CL-20, PC). Two Al–Ni mixtures were prepared at atomic ratios of 1:1 and 1:3 and named as Al/Ni and Al/3Ni, respectively. The thermal reactivity and combustion behaviors of Al–Ni@ECs composites have been comprehensively investigated. Results showed that the reactivity and combustion performance of Al–Ni could be enhanced by introducing both NA and PC energetic composites. Among which the Al/Ni@NA composite exhibited higher reactivity and improved combustion performance. The measured flame propagation rate (v = 20.6 mm/s), average combustion wave temperature (T_max = 1567.0 °C) and maximum temperature rise rate (γ_t = 1633.6 °C/s) of Al/Ni@NA are higher than that of the Al/Ni (v = 15.8 mm/s, T_max = 858.0 °C, and γ_t = 143.5 °C/s). The enhancement in combustion properties could be due to presence of the acidic gaseous products from ECs, which could etch the Al₂O₃ shell on the surface of Al particles, and make the inner active Al to be easier transported, so that an intimate and faster intermetallic reaction between Al and Ni would be realized. Furthermore, the morphologies and chemical compositions of the condensed combustion products (CCPs) of Al–Ni@ECs composites were found to be different depending on the types of ECs. The compositions of CCPs are dominated with the Al–Ni intermetallics, combining with a trace amount of Al₅O₆N and Al₂O₃.     

Performances and direct writing of CL-20 based ultraviolet curing explosive ink

A new type of explosive ink formulation that can be quickly cured was prepared with unsaturated polyester as binder,styrene as active monomer,2,4,6-trimethylbenzoyl-diphenylphosphine oxide as photoinitiator,and hexanitrohexaazaisowurtzitane (CL-20) as the main explosive.Then the explosive ink direct writing technology was used to charge the micro-sized energetic devices,the curing mechanism of the explosive ink was discussed,and the microstructure,safety performance and explosive transfer performance of the explosive ink molded samples were tested and analyzed.Results indicate that the composite material has a fast curing molding speed,its hardness can reach 2H within 8 min.The crystal form of CL-20 in the molded sample is still ε type.The CL-20 based W-curing explosive ink formulation has good compatibility,its apparent activation energy is increased by about 3.5 kJ/mol.The composite presents a significant reduction in impact sensitivity and its characteristic drop height can reach 39.8 cm,which is about 3 times higher than the raw material.When the line width of charge is 1.0 mm,the critical thickness of the explosion can reach 0.015 mm,and the explosion velocity is 7129 m/s when the charge density is 1.612 g/cm3.     

QF炮膛擦拭剂的研制

介绍了QF炮膛擦拭剂的研制原理、配方、制备工艺、性能及应用情况。实验室理化性能测定和实际使用结果表明,该剂具有清洁能力强、防锈性好、使用方便等特点,对火炮射击结束后残留在炮膛内的火药残渣和尼龙残渣具有良好的去除作用,是一种应用前景广泛的武器装备维护保养新材料。     

固体燃料冲压发动机飞行性能分析

固体燃料冲压发动机性能通过进气道与导弹飞行工况关联在一起,其工作过程需考虑导弹飞行参数对发动机性能的影响。与其它冲压发动机相比,固体燃料冲压发动机一个显著特点是推进剂燃烧过程不仅与推进剂配方、发动机结构和燃烧室压强有关,还取决于燃烧室入口空气参数,因此工作过程较为复杂。在国内首次建立固体燃料冲压发动机工作过程仿真模型,并分析导弹飞行马赫数和高度对发动机性能的影响规律。