无人机位置欺骗诱导策略

针对"黑飞"无人机的有效管控及处置问题,提出基于卫星导航定位位置欺骗的无人机诱导策略。结合目标无人机的精确位置信息,利用生成式导航欺骗干扰技术向目标发射虚假的卫星导航定位信号,使目标无人机飞行控制系统得到错误的位置信息,改变飞行姿态,进而偏离预设运动轨迹。通过无人机诱导试验验证了所提策略的正确性和有效性。     

融合神经网络与超像素的候选区域优化算法

为解决目标检测中候选区域召回率低的问题,提出融合神经网络与超像素的目标候选区域算法。该算法利用神经网络提取更能清楚表达目标边界的特征,并使用聚类、相似性等策略,计算每个滑动窗口所含有的边缘信息量;将待测图像使用简单线性迭代聚类算法分割成若干个超像素,并利用超像素的空间位置、完整性、相邻超像素间的对比度信息,计算各个超像素的显著性得分及每个滑动窗口的显著性得分;根据每个滑动窗口的边缘信息及显著性得分筛选滑动窗口。在PASCAL VOC 2007测试集上进行对比实验,其实验结果表明:所述算法能够快速产生定位质量高的候选区域。     

Real-time prediction of projectile penetration to laminates by training machine learning models withfinite element solver as the trainer

Studies on ballistic penetration to laminates is complicated, but important for design effective protection of structures. Experimental means of study is expensive and can often be dangerous. Numerical simu-lation has been an excellent supplement, but the computation is time-consuming. Main aim of this thesis was to develop and test an effective tool for real-time prediction of projectile penetrations to laminates by training a neural network and a decision tree regression model. A large number of finite element models were developed;the residual velocities of projectiles fromfinite element simulations were used as the target data and processed to produce sufficient number of training samples. Study focused on steel 4340tpolyurea laminates with various configurations. Four different 3D shapes of the projectiles were modeled and used in the training. The trained neural network and decision tree model was tested using independently generated test samples using finite element models. The predicted projectile velocity values using the trained machine learning models are then compared with thefinite element simulation to verify the effectiveness of the models. Additionally, both models were trained using a published experimental data of projectile impacts to predict residual velocity of projectiles for the unseen samples. Performance of both the models was evaluated and compared. Models trained with Finite element simulation data samples were found capable to give more accurate predication, compared to the models trained with experimental data, becausefinite element modeling can generate much larger training set, and thus finite element solvers can serve as an excellent teacher. This study also showed that neural network model performs better with small experimental dataset compared to decision tree regression model.     

An improved adaptive differential evolution algorithm for single unmanned aerial vehicle multitasking

Single unmanned aerial vehicle (UAV) multitasking plays an important role in multiple UAVs cooperative control, which is as well as the most complicated and hardest part. This paper establishes a three-dimensional topographical map, and an improved adaptive differential evolution (IADE) algorithm is proposed for single UAV multitasking. As an optimized problem, the efficiency of using standard differential evolution to obtain the global optimal solution is very low to avoid this problem. Therefore, the algorithm adopts the mutation factor and crossover factor into dynamic adaptive functions, which makes the crossover factor and variation factor can be adjusted with the number of population iteration and individual fitness value, letting the algorithm exploration and development more reasonable. The experimental results implicate that the IADE algorithm has better performance, higher convergence and efficiency to solve the multitasking problem compared with other algorithms.     

预报风强度对火箭最大气动载荷精度影响及建模分析

针对不同预报风强度的精度以及其对应的最大气动载荷预报值精度的研究文献极少。以某地区实况风为基准,分别对不同预报风强度的精度以及其对应的最大气动载荷预报值精度特征进行了分析,并利用多元线性回归方法建立了订正模型,结果表明在预报日数第1～11天,预报风强度越大,预报风精度及其对应的最大气动载荷预报值精度越高;利用多元线性回归方法可提高最大气动载荷预报值精度,且预报风强度越小,最大气动载荷预报精度提高越明显。这些发现在火箭发射前的飞行保障及安全决策方面具有参考价值。     

大型军车新型底盘自动集中润滑系统的研究与开发

开发了大型军车使用的新型底盘自动集中润滑系统(Chassis Centralized Lubrication System)。系统采用高效润滑泵、嵌入式控制系统及车内CAN总线网络扩展技术,大大提高了大型军车底盘的寿命,可有效地减少战场环境下的底盘故障。     

近程防空武器网络化跟踪系统

研究多探测器航迹滤波与互联新技术与新方法,把数据融合的基本理论和计算机网络技术应用于近程防空武器的跟踪系统中,得到了近程防空武器网络化跟踪系统的框架.应用数据融合和计算机网络技术可以提高近程防空武器的使用效率.     

水下航行器动力定位下的运动轨迹设计与仿真

对远程低速水下航行器在动力定位系统作用下的运动进行了研究.远程低速水下航行器由于航程远必须采用GPS全球导航定位系统进行导航,于是水下航行器就必须具有动力定位的能力,使之可以在需要GPS导航的时候上浮到近水面,导航完成后再下潜回航行深度.在建立水下航行器运动数学模型及进行推力分配的基础上,对远程低速水下航行器的典型运动轨迹进行了仿真,并对仿真结果进行了分析.     

基于小波网络的非线性系统辨识研究

小波网络为非线性系统辨识研究提供了一种有效的方法,但目前用于小波网络学习的进化算法易陷入局部极小等缺陷.结合生物免疫系统的概念和理论,在非线性系统辨识中引入基于免疫算法的小波网络.该算法中抗体通过浓度相互作用的机制来促进或抑制抗体的生成,借此保持抗体的多样性,并产生了高亲和力的抗体对种群进行不断的更新,提高了算法的全局搜索能力和收敛速度.最后,把基于免疫算法的小波网络用于一个非线性系统辨识的标准实例中,仿真结果验证了该算法的有效性.     

热真空条件下工作的电气电缆载流量计算与试验

高空制导飞行器从母舱释放后,制导舱与仪器舱之间部分电气电缆处于热真空条件下工作。对此种特定条件下的电缆进行了载流量计算。理论计算表明,给定的电缆设计满足在热真空条件下正常工作要求。最后简略介绍了载流量试验。