基于ANSYS的舰船武器装备基准变化分析方法

舰船武器装备基准在外界环境作用下产生变化,从而影响武器系统的打击精度。应用ANSYS平台建立舰船有限元模型,利用三维波浪载荷的计算方法模拟航行条件下的波浪力,研究了舰船甲板面武器装备基准在两种极限海况下的变化情况,发现针对此类舰船横摇使武器装备基准产生较大的变化,并且靠近尾部和两舷位置处装备的基准变化较为显著。仿真结果表明：当舰船在风浪中航行使用武器系统时,应尽量采取顶浪航行,减少舰船横摇对武器系统基准的影响。     

海洋内孤立波时空仿真分析

目前对于内波传播有很多研究方法,虽然总结了很多内波传播的特性,但很少对内波传播特性全面的总结,因此,从内波KDV方程出发,利用椭圆函数展开进行求解,结合垂向模态函数对内波水下结构进行仿真,同时对内波水平流与垂直流在空间与时间上的分布进行分析,总结了内孤立波传播特性,为内波系统的研究提供理论基础。     

土中爆炸对埋地管线冲击作用的数值模拟分析

为了研究土中爆炸作用下埋地管线的安全问题,利用AUTODYN-2D、AU?TODYN-3D程序,采用程序提供的流固耦合功能和网格映射功能,对爆炸地冲击作用下埋地管线的变形和破坏问题进行了数值模拟分析,得到不同爆心间距管线的应力峰值.将模拟计算结果和理论计算结果进行了对比分析,结果表明:模拟计算值与TM5-855-1手册理论计算值比较吻合,表明采用数值模拟方法分析爆炸地冲击对埋地管线的作用是可行的,计算结果对地下爆破的安全施工和埋地管线的安全运行具有参考价值.     

利用径向力平衡飞行控制的航天器高精度轨道捕获方法

为实现对探测器轨道形状与高度的精准调整,提出一种径向力平衡飞行的航天器连续推力控制新方法。建立连续推力平衡飞行的动力学极坐标模型,并推导出特殊条件下的解析轨道解,进一步分析边值条件,给出连续推力的控制律。利用这一平衡飞行控制理论,构建轨道捕获的最优控制策略。考虑推力器的推力水平,通过一次或多次的控制过程,实现对轨道形状、轨道高度及轨道相位的综合调整。数值仿真表明:利用平衡飞行的轨道控制方法,配置微小推力器的空间引力波探测器可以实现高精度的轨道捕获;该方法具有控制过程可解析、计算量小、简便、实用等特点。     

手性吸波混凝土电磁屏蔽性能实验研究

综述了手性吸波的研究现状。在实验中进行了手性吸波混凝土的制备,测试了实验样品的电磁屏蔽性能。结果表明,手性吸波模型是混凝土吸波的完整理论,对混凝土的高吸波性能、高屏蔽性能、宽频性能的研究提供了理论基础,为先进吸波混凝土的研制开辟了新途径。     

On efficient algorithms for finding efficient salvo policies

We consider the salvo policy problem, in which there are k moments, called salvos, at which we can fire multiple missiles simultaneously at an incoming object. Each salvo is characterized by a probability p_i: the hit probability of a single missile. After each salvo, we can assess whether the incoming object is still active. If it is, we fire the missiles assigned to the next salvo. In the salvo policy problem, the goal is to assign at most n missiles to salvos in order to minimize the expected number of missiles used. We consider three problem versions. In Gould's version, we have to assign all n missiles to salvos. In the Big Bomb version, a cost of B is incurred when all salvo's are unsuccessful. Finally, we consider the Quota version in which the kill probability should exceed some quota Q. We discuss the computational complexity and the approximability of these problem versions. In particular, we show that Gould's version and the Big Bomb version admit pseudopolynomial time exact algorithms and fully polynomial time approximation schemes. We also present an iterative approximation algorithm for the Quota version, and show that a related problem is NP-complete.     

Damage assessment of the target area of the island/reef under the attack of missile warhead

Under the background of vigorously developing facilities of island/reef in the world, the economic value and strategic significance of the island/reef have become increasingly important. Unfortunately, they may easily become the attacking target of missiles in the war time. Therefore, aiming at the damage quantification of the targets in the island/reef under the missile attacking, a macroscopic damage assessment model for the target area is proposed in this paper. The model focuses on the construction of the assessment model framework. Firstly, the analytic hierarchy process and the grey relational analysis are applied to measure the importance of each target in the region through four indicators of the target hazard, striking urgency, damage advantage and mission relevance, respectively. Secondly, based on the damage mechanism of shock wave and fragments to target, the corresponding damage model is established, and the damage grade of each target in the evaluated area is obtained according to the damage criteria and grading standard. Finally, the model obtains the overall damage grade of the target area by employing the fuzzy comprehensive evaluation method, with synthesizing the importance and the damage grade of each target. Through the verification of an example, it demonstrates the certain feasibility of the model and provides a certain basis and reference for the subsequent research.     

目标宽频带RCS的快速算法研究

目标宽带RCS预估算法一直是计算电磁学的一个研究热点,本文分别研究了渐近波形估计技术（AWE）与最佳一致逼近技术在宽频带RCS预估领域内的应用。首先,介绍了传统矩量法计算RCS的原理,并分析了两种快速算法的计算过程。然后,采用这两种技术,分别计算了简易飞机模型的RCS值,并对这两种方法进行比较。计算结果表明相比传统的矩量法,这两种方法在不影响精度的前提下大大提高了计算效率。同时,相比渐近波形估计技术,最佳一致逼近技术在节省内存,节约时间方面更具优势。最后,采用最佳一致逼近理论,结合电磁计算软件,实现较大尺寸目标的宽频带RCS的计算。     

Single‐machine scheduling with deadlines to minimize the total weighted late work

We consider scheduling a set of jobs with deadlines to minimize the total weighted late work on a single machine, where the late work of a job is the amount of processing of the job that is scheduled after its due date and before its deadline. This is the first study on scheduling with the late work criterion under the deadline restriction. In this paper, we show that (i) the problem is unary NP‐hard even if all the jobs have a unit weight, (ii) the problem is binary NP‐hard and admits a pseudo‐polynomial‐time algorithm and a fully polynomial‐time approximation scheme if all the jobs have a common due date, and (iii) some special cases of the problem are polynomially solvable.