一种无缓冲的光互连网络的吞吐率性能分析及优化

针对当前高性能计算机光互连网络中存在的光缓冲不易实现的问题,提出了一种无缓冲的光互连网络结构BOIN,并在对网络结构进行建模和分析的基础上,研究了网络的吞吐率随不同的输入负载和网络规模而变化的规律,给出了在一定的互连总规模和输入负载下,网络实际吞吐率达到最大值时网络拓扑结构所必须满足的条件.最后用模拟实验证明了这一结果的正确性.     

挫折情境下军人不良心理表现及应对策略

对在挫折情境下军人不良的心理状态，应分析不良的心理表现，并给出应对策略。在心理学的视角下，从正确认识挫折、寻求社会支持、提高适应能力和军人情商的途径四个方面，对挫折情境下军人不良心理表现提出四点启示。     

基于数据包络分析的公安消防部门绩效评价

利用数据包络理论，建立了以消防经费、出动人员、出动车辆为输入指标，扑救起数、抢救财产、抢救人员为输出指标的公安消防部门绩效评价指标体系。研究表明，数据包络分析方法运用于公安消防部门绩效评价中是切实可行的，丰富了绩效评价方法中采用定量方法分析的种类，将绩效评价上升到了可获得反馈信息的层面，具有推广应用的价值。     

火控系统故障诊断与性能检测设备研究

从设备主要功能、设备硬件设计、检测软件及故障诊断软件设计等方面,系统地分析了检测设备的总体设计方案,功能特点,信号采集、处理与控制等。设计过程突出了理论与实践相结合的设计理念,针对某型火控系统的特点,结合实际研制过程,该方法具有较好的应用推广价值。     

基于TCP Veno算法的异构网络边界代理改进机制研究

针对在异构网络环境下无线网络的特点使TCP性能下降的问题,借鉴TCP Veno算法原理,提出基于网络状况评估的拥塞控制的性能增强代理改进工作机制,动态评估当前网络的状况,调整预应答发送窗口的阈值,提高性能增强代理在较大差异网络下的传输控制效能．基于NS-2的网络仿真测试对算法进行了验证,结果显示改进后的工作机制在丢包率较大的异构网络中性能有明显提升．     

基于灰色系统理论的军队油料节约人员360度绩效评估

基于360度绩效评估理论,从德、能、勤、绩4个方面构建了包含4个1级指标和16个2级指标的军队油料节约人员360度绩效评估指标体系。利用层次分析法确定了各评估指标的权重,运用灰色系统理论的原理和方法,构建了多层次灰色评估模型,并对某油料节约小组5位油料节约人员进行了360度绩效评估。案例应用表明,此方法具有系统综合各层评估者提供的"贫信息"的优点,不仅能得出被评估者的灰类及优劣顺序,而且得到了各指标所属灰类和具体的灰色评价权值,使360度绩效较好地实现了绩效反馈的目的。该研究为军队油料节约人员绩效管理工作提供了新的思路和方法。     

基于删除平均的VI-CFAR检测器

针对MLVI-CFAR检测器在多个随机分布干扰目标背景下检测性能不好,以及OSVI-CFAR检测器在均匀环境和仅单滑窗存在干扰目标的环境下检测性能欠佳问题,提出了一种基于删除平均(CML)的VI-CFAR检测器(CMLVI-CFAR).仿真验证了CMLVI-CFAR检测器在均匀背景及多目标干扰环境下,都具有比MLVI和OSVI-CFAR检测器好的检测性能,并且其在杂波边缘背景下的虚警控制能力与前两者也基本一致,说明其在实际杂波环境中具有更强的鲁棒性和良好的应用潜力.     

利用深度学习的硬件计数器复用估计算法

利用深度学习方法,为硬件计数器复用(multiplexing,MPX)提供结果精度更高的估计模型。通过对MPX估计得到的结果与实际采集的真实数据进行相似性分析,证明相同程序多次运行之间得到的硬件计数值是线性相关的。采用神经网络多层感知器(multilayer perceptron,MLP)和双向门控神经网络(bidirectional gated recurrent unit, Bi-GRU)这2种深度学习模型,对MPX数据进行拟合。基于动态时间规整(dynamic time warping, DTW),提出一个全新的评估MPX数据精度的指标DTW-cost。实验结果表明,同时收集15个硬件事件数据时,MLP方法拟合得到的13个高性能计算应用平均准确率比现有使用最广的固定插值法高出10.53%,最多可提升19.8%;而在MLP表现较差的事件上,Bi-GRU方法得到的平均准确率提升了28.8%。     

Tuning the reactivity of Al–Ni by fine coating of halogen-containing energetic composites

In this paper, various core-shell structured Al–Ni@ECs composites have been prepared by a spray-drying technique. The involved ECs refer to the energetic composites (ECs) of ammonium perchlorate/nitrocellulose (AP/NC, NA) and polyvinylidene fluoride/hexanitrohexaazaisowurtzitane (PVDF/CL-20, PC). Two Al–Ni mixtures were prepared at atomic ratios of 1:1 and 1:3 and named as Al/Ni and Al/3Ni, respectively. The thermal reactivity and combustion behaviors of Al–Ni@ECs composites have been comprehensively investigated. Results showed that the reactivity and combustion performance of Al–Ni could be enhanced by introducing both NA and PC energetic composites. Among which the Al/Ni@NA composite exhibited higher reactivity and improved combustion performance. The measured flame propagation rate (v = 20.6 mm/s), average combustion wave temperature (T_max = 1567.0 °C) and maximum temperature rise rate (γ_t = 1633.6 °C/s) of Al/Ni@NA are higher than that of the Al/Ni (v = 15.8 mm/s, T_max = 858.0 °C, and γ_t = 143.5 °C/s). The enhancement in combustion properties could be due to presence of the acidic gaseous products from ECs, which could etch the Al₂O₃ shell on the surface of Al particles, and make the inner active Al to be easier transported, so that an intimate and faster intermetallic reaction between Al and Ni would be realized. Furthermore, the morphologies and chemical compositions of the condensed combustion products (CCPs) of Al–Ni@ECs composites were found to be different depending on the types of ECs. The compositions of CCPs are dominated with the Al–Ni intermetallics, combining with a trace amount of Al₅O₆N and Al₂O₃.     

Performances and direct writing of CL-20 based ultraviolet curing explosive ink

A new type of explosive ink formulation that can be quickly cured was prepared with unsaturated polyester as binder,styrene as active monomer,2,4,6-trimethylbenzoyl-diphenylphosphine oxide as photoinitiator,and hexanitrohexaazaisowurtzitane (CL-20) as the main explosive.Then the explosive ink direct writing technology was used to charge the micro-sized energetic devices,the curing mechanism of the explosive ink was discussed,and the microstructure,safety performance and explosive transfer performance of the explosive ink molded samples were tested and analyzed.Results indicate that the composite material has a fast curing molding speed,its hardness can reach 2H within 8 min.The crystal form of CL-20 in the molded sample is still ε type.The CL-20 based W-curing explosive ink formulation has good compatibility,its apparent activation energy is increased by about 3.5 kJ/mol.The composite presents a significant reduction in impact sensitivity and its characteristic drop height can reach 39.8 cm,which is about 3 times higher than the raw material.When the line width of charge is 1.0 mm,the critical thickness of the explosion can reach 0.015 mm,and the explosion velocity is 7129 m/s when the charge density is 1.612 g/cm3.