定应变作用下NEPE推进剂老化特性及寿命预估研究

为考察定应变作用下NEPE推进剂的老化特性,研究了20%定应变作用下NEPE推进剂贮存老化过程中力学性能、凝胶性能和界面性能的变化.研究结果表明:定应变作用下NEPE推进剂在贮存老化过程中最大抗拉强度降低,最大延伸率变化较小,其老化失效主要表现为强度的失效;定应变下NEPE推进剂的凝胶百分数和粘附功随老化时间的延长而降低,NEPE推进剂粘合剂基体的降解断裂和界面的"脱湿"是其主要的老化机理;定应变下NEPE推进剂的力学性能与细观性能的相关性研究表明,最大抗拉强度与凝胶百分数和粘附功存在相关关系,计算了其关系式,建立了由细观性能评估推进剂宏观力学性能的方法;选择最大抗拉强度下降30%时失效,20%定应变下NEPE推进剂的贮存寿命为8.3年.     

电缆热老化寿命预测

利用热分析技术，对电缆绝缘材料的热老化寿命进行了研究，得到了电缆绝缘材料热老化寿命的计算公式。在不同载流量下，对电缆绝缘材料热老化寿命进行了比较，给出了电缆热老化寿命与载流量的函数关系，为电流致热型线缆火灾的防治提供了基础数据。     

复合材料修补金属裂损结构吸湿老化的试验与有限元分析

暴露在湿热环境中的复合材料修补金属裂损结构易吸湿老化,导致该结构性能下降,服役寿命缩短。为研究吸湿性对复合材料修补金属裂损结构修补效果和耐久性的影响,利用试验方法分析了吸湿性对复合材料胶补金属裂损结构及胶黏剂力学性能的影响;利用有限元方法评估了吸湿性对复合材料胶补金属裂损结构试验件修补效果和耐久性的影响。研究结果表明:吸湿后含穿透双边裂纹铝合金板玻璃纤维单面胶补试验件的疲劳裂纹扩展寿命和极限载荷的平均值分别下降为吸湿前的71%和90%;吸湿造成拉伸条件下复合材料胶补金属裂损结构胶层失效模式由内聚破坏为主转变为界面破坏为主;在"湿-热"老化30天后,E44/聚酰胺环氧树脂胶黏剂试验件吸水饱和,弹性模量下降为未老化前的40%,塑性应变超过了总应变的25%;有限元分析发现胶层损伤受吸湿影响明显,吸湿性加速了胶层损伤,且裂纹长度越长,加速作用越明显;同时吸湿使得裂纹尖端的J积分值急剧增大,导致修补结构的疲劳裂纹扩展寿命缩短,裂纹长度越长,吸湿性对于复合材料胶接修补效果的危害越严重。     

Dynamic signatures and their use in comparing the reliability of new and used systems

The signature of a system with independent and identically distributed (i.i.d.) component lifetimes is a vector whose ith element is the probability that the ith component failure is fatal to the system. System signatures have been found to be quite useful tools in the study and comparison of engineered systems. In this article, the theory of system signatures is extended to versions of signatures applicable in dynamic reliability settings. It is shown that, when a working used system is inspected at time t and it is noted that precisely k failures have occurred, the vector s [0,1]^n‐k whose jth element is the probability that the (k + j)th component failure is fatal to the system, for j = 1,2,2026;,n ‐ k, is a distribution‐free measure of the design of the residual system. Next, known representation and preservation theorems for system signatures are generalized to dynamic versions. Two additional applications of dynamic signatures are studied in detail. The well‐known “new better than used” (NBU) property of aging systems is extended to a uniform (UNBU) version, which compares systems when new and when used, conditional on the known number of failures. Sufficient conditions are given for a system to have the UNBU property. The application of dynamic signatures to the engineering practice of “burn‐in” is also treated. Specifically, we consider the comparison of new systems with working used systems burned‐in to a given ordered component failure time. In a reliability economics framework, we illustrate how one might compare a new system to one successfully burned‐in to the kth component failure, and we identify circumstances in which burn‐in is inferior (or is superior) to the fielding of a new system. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

发动机粘接界面加速老化及寿命预测

介绍发动机粘接界面老化试验,根据其力学特性的变化,建立合适的数学模型,并估算出贮存寿命。