Emergency transshipment in decentralized dealer networks: When to send and accept transshipment requests

While there has been significant previous literature on inventory transshipment, most research has focused on the dealers' demand filling decision (when to fill transshipment requests from other dealers), ignoring the requesting decision (when to send transshipment requests to other dealers). In this paper we develop optimal inventory transshipment policies that incorporate both types of decisions. We consider a decentralized system in which the dealers are independent of the manufacturer and of each other. We first study a network consisting of a very large number of dealers. We prove that the optimal inventory and transshipment decisions for an individual dealer are controlled by threshold rationing and requesting levels. Then, in order to study the impact of transshipment among independent dealers in a smaller dealer network, we consider a decentralized two‐dealer network and use a game theoretic approach to characterize the equilibrium inventory strategies of the individual dealers. An extensive numerical study highlights the impact of the requesting decision on the dealers' equilibrium behavior in a decentralized setting. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

基于RTP协议H．264视频流传输QoS保证的研究

提出一个Linux环境下基于RTP/RTCP的H.264视频流传输的方案,在Linux中调用V4L(VideofourLinux)的API函数采集视频流,经X264压缩,RTP/RTCP协议打包进行传输。并通过RTCP的RR(接收方报告)包反馈信息和吞吐量公式来计算近似带宽,以起始帧量化参数start-qp为视频编码的调节参数,由近似带宽来控制视频编码的参数调整,达到控制输出码率的目的,实现对视频传输的QoS(QualityofService)保证。     

三坐标雷达目标真实高度估计算法研究

在目标跟踪领域,通过三坐标雷达的测量值(斜距、仰角及方位角)来估算目标的真实高度一直是个难点。目前主要有两类处理方法:坐标转换法和等效地球半径法。前者把与雷达天线相关的三坐标测量值转换到大地坐标系统来计算目标高度;后者充分考虑地球曲率以及大气折射的特性,通过增加地球半径来估算目标的高度。最后对上述的两类方法进行总结、比较与分析。     

一种基于SOAP安全的网络中心发布/订阅机制

针对网络中心发布/订阅系统异步、松散耦合和多对多通信等特点,采用了SOAP消息传递机制对信息进行了封装,从而屏蔽了信息的异构性。考虑到信息传输的可靠性,采用XML-Encryption机制构造SOAP消息,为消息交换和数据传输提供一种安全的保证。实际应用表明该系统在网络中心战中有较好的应用前景。     

应用SoC实现装备维修改造的研究

片上系统(SoC)技术是近年来随着微电子技术发展出现的新技术,现已被广泛应用.利用SoC可以将原来由许多芯片完成的复杂功能,集中到一块芯片中完成,以获得更高的系统性能.以某火控系统中的模拟量输入通道为例,阐述了通过SoC技术,用基于FPGA/CPLD的方法对火控系统硬件电路进行维修改造,从而探讨了解决装备维修问题的一种方法.并讨论了改造过程中单稳态触发器96L02的替代问题,以及FPGA/CPLD与外围电路的驱动能力问题.     

改善逆变器输出电压波形的研究

在115 V/400Hz逆变电源中,A/D转换器引起的量化误差对系统的影响是造成系统不稳定的主要因素之一.通过对逆变器反馈通道误差的分析,采用全波整流电路对115 V/400 Hz逆变电源中A/D采样电路进行了改进,减小反馈通道误差,使逆变器的稳态电压输出波形质量得到显著改善.     

软件无线电的关键技术及其发展趋势

软件无线电技术近年来得到了较快发展,其主要是利用软件来实现无线通信系统中的各种功能。介绍了软件无线电的关键技术、评价标准和发展过程,并展望了软件无线电的发展前景。     

OQAM/OFDM系统中基于压缩感知的离散导频信道估计方法

针对多径信道条件下,偏移正交幅度调制的正交频分复用(OQAM/OFDM)系统中采用导频序列方式进行信道估计时导频开销较大的问题,提出一种基于压缩感知的离散导频信道估计方法。该方法利用无线信道的稀疏特性,建立基于压缩感知的OQAM/OFDM系统信道估计模型,对离散导频结构进行了优化设计,使较少的导频符号随机分布在子载波上,在接收端利用信号恢复算法实现信道估计。该方法能够显著减少导频数量,并实现高精度信道估计性能,通过实验仿真对比验证了所提方法在慢时变和快时变的无线信道条件下的有效性。     

坦克直瞄/间瞄射击一体化火控技术

直瞄射击方式是目前坦克采用的主要射击方式。直瞄射击方式受战场通视度及瞄准装置视距的影响,最大射击距离一般在5 km左右。间瞄射击方式不需要直接瞄准目标,不受战场通视度的影响,最大射击距离主要取决于火炮及弹药的性能,一般在10 km以上。未来坦克应具备直瞄射击与间瞄射击一体化能力。通过直瞄/间瞄射击火控技术的对比与分析,提出坦克直瞄/间瞄射击一体化火控方案。一体化火控具有新的技术特色,具有更强的综合作战能力,是未来坦克火控技术发展的一种趋势。     

The unnecessary uprising: Jeju Island rebellion and South Korean counterinsurgency experience 1947–48

This paper systematically analyzes the causes of the escalation of violence during the initial stages of the Jeju Island Rebellion and the failure of South Korean counterinsurgency operations. It is argued that four interrelated factors provided the conditions for armed insurgency in the small island of Jeju: inter-agency tension between the Korean National Police (KNP) and the Korean Constabulary; the mainlanders' misinterpretation of the insurgency; the effect of systematic police brutality; and the role of youth groups. Consequently, two counterinsurgency lessons will be drawn from this study: that inter-agency cooperation and coordination at the tactical level between security branches and the incorporation of local population at the micro-level is essential in conducting efficient and effective counterinsurgency operations.