超声冲击处理改善22SiMn2TiB装甲钢抗应力腐蚀性能研究

采用超声冲击处理工艺对22SiMn2TiB装甲钢试样进行了表面冲击强化,采用四点弯曲加载装置将处理和未处理的试样在3.5%NaCl溶液中进行了150 d的应力腐蚀试验。用X射线应力测定仪测定了应力腐蚀试验前试样表面的残余应力,用扫描电镜和透射电镜观察了处理后试样的断面组织。分析了超声冲击处理引起的残余应力和断面组织变化对改善装甲钢抗应力腐蚀性能的作用。结果表明,超声冲击处理引入的残余压应力和表层晶粒细化可以大大提高22SiMn2TiB装甲钢的抗应力腐蚀性能。     

Experimental study of transient pressure wave in the behind armor blunt trauma induced by different rifle bullets

Pressure wave plays an important role in the occurrence of behind armor blunt trauma (BABT), and ballistic gelatin is widely used as a surrogate of biological tissue in the research of BABT. Comparison of pressure wave in the gelatin behind armor for different rifle bullets is lacking. The aim of this study was to observe dynamic changes in pressure wave induced by ballistic blunt impact on the armored gelatin block and to compare the effects of bullet type on the parameters of the transient pressure wave. The gelatin blocks protected with National Institute of Justice (NIJ) class III bulletproof armor were shot by three types of rifle bullet with the same level of impact energy. The transient pressure signals at five locations were recorded with pressure sensors and three parameters (maximum pressure, maximum pressure impulse, and the duration of the first positive phase) were determined and discussed. The results indicated that the waveform and the twin peak of transient pressure wave were not related to the bullet type. However, the values of pressure wave’s parameters were significantly affected by bullet type. Additionally, the attenuation of pressure amplitude followed the similar law for the three ammunitions. These findings may be helpful to get some insight in the BABT and improve the structure design of bullet.     

装甲装备器材仓库MIS分析与设计

为提高装甲器材仓库的管理水平,促进装甲装备技术保障建设,结合我军装甲器材仓库编 制体制和器材保障需求,应用面向对象的方法,提出了系统的总体框架、层次结构,论述了系统的功能。 从而为我军装甲器材仓库的信息化建设提出了一套切实可行的技术方案。     

面向作战时节的装甲目标威胁评估方法

针对装甲目标威胁评估指标权重随着作战时节的动态变化,容易导致评估结果前后有差异的问题,运用灰色区间关联法,引入区间灰数与灰度,对评估指标区间内的不确定性信息进行了量化。同时,运用变权理论,通过调整权向量,构造反映作战时节内装甲目标威胁评估指标权重变化的均衡函数,对装甲目标威胁程度进行了科学、合理的评估,解决了传统评估方法中评估结果与实际威胁程度不一致的问题,为下一步的威胁评估研究工作提供了理论参考与方法支持。     

30mm半穿甲弹斜侵彻陶瓷/钢复合装甲的弹着角效应研究

设计了30mm半穿甲弹斜侵彻陶瓷/钢复合靶的弹道试验,采用高速摄像记录了弹靶作用过程,研究了弹着角、弹丸位移以及背板变形挠度的图像测量方法,通过仿真验证了该方法的可行性与准确性.基于高速摄像序列图像对弹靶作用过程进行了测量分析,结合试验数据研究了弹着角对半穿甲弹侵彻效能的影响.结果表明:弹着角导致弹丸受靶板的不对称阻力作用,侧向力及侧向力矩使得弹丸在侵彻过程中不断偏转,表现为侵彻路径呈曲线;在相同速度条件下,随着弹着角的增大,侵靶时间延长,背板变形挠度减小,侵彻效能降低.     

B4C／Al复合板中应力波行为分析（Ⅱ）

在已建立的应力波传播模型和研究弹、板间作用力所获结果的基础上，为分析复合板应力的变化，对复合板弹板碰撞承受的应力进行了简化处理，根据应力波传播特性，确定了复合板内能量集中区域，研究了应力波在复合板巾的传播和能耗，并讨论了应力波对陶瓷的作用。通过近似计算，发现烧蚀消耗的弹丸动能较大，在复合板中，Al板的塑性变形吸收了19％的弹丸动能。