空气/煤油/水燃气发生器点火特性试验研究

燃气发生器是超燃冲压发动机地面试验系统中的关键设备,为提高系统安全性和经济性设计了空气/煤油/水燃气发生器,在富燃状态下进行了一系列点火试验,试验结果表明：该型燃气发生器,实现可靠点火的余氧系数下限为0.51;水的加入使得化学反应速率和火焰传播速度降低,燃气发生器点火和火焰稳定困难,提高余氧系数可以提高点火可靠性。同时水的加入容易引起燃烧不稳定,通过提高余氧系数可消除低频不稳定燃烧。     

Terrorism,insurgency, kidnapping,and security in Africa's energy sector

Energy continues to serve as the bedrock of modern economies and the main driver of modern society. For Africa, the production and supply of energy resources such as crude oil, natural gas, uranium, coal, biomass, biofuels and other renewables are an important source of employment, rents, taxes, royalties and profits. This sector brings in several tens of billions of dollars of revenue annually. The production and delivery of such resources, however, depend on critical infrastructures such as pipelines, refineries, processing plants, terminals, rigs, electrical energy pylons, substations, pump stations, vessels, and tankers. These infrastructures have been attacked by terrorists, insurgents, vandals and saboteurs, all of whom see them as targets against which to register their grievances and extract concessions from the state. This paper is a chronological account of some of the documented incidents of terrorism, insurgency, kidnapping, destruction, sabotage, and human casualties suffered in the oil and gas sectors in Africa between 1999 and 2012. It is based on data extracted from the databases of the RAND Database of World Terrorism Incidents and the University of Maryland's Global Terrorism Database (GTD).     

Boltzmann 方程求解方法综述

本文论述了Ｂｏｌｔｚｍａｎｎ方程的求解方法，在分析了各类求解方法的优缺点之后指出目前Ｍｏｎｔｅ－Ｃａｒｌｏ直接模拟方法是解决稀薄气体动力学问题的最佳方法。     

逸出气体检测的程序升温气相色谱法

建立了一种利用程序升温气相色谱仪的逸出气体检测(EGD)系统,用于测量液薄膜、固薄膜、纤维,粉末等材料中微量的热挥发及(或)挥发性热分解组分。这类微量用常规热分析法(如热重法(TG)、微商热重(DTG)及差热分析(DTA)等)一般难以测出。用该法测量的GuSO_4·5H_2O粉末样品、端羟基聚丁二烯(HTPB)及邻苯二甲酸二丁酯(DBP)薄膜样品逸出气的EGD数据同TG-DTG-DTA联用技术所得结果作了比较。还用该系统检测了硼酸(槽浴)阳极氧化铝箔、碳纤维、碳化硅纤维的逸出气体。阐述了本法的优点及具体步骤。     

脉冲防暴水炮非淹没气体射流的RANS和LES模拟

为提高脉冲防暴水炮刺激剂的雾化水平,必须提高射流的出口速度和改善雾化带形状,而这些因素与管内非淹没气体射流的湍流流场息息相关。为准确描述湍流分布和水柱加速过程,对脉冲防暴水炮的非淹没气体射流进行了RANS和LES模拟。结果表示LES模型较RANS的标准k-ε模型能更为精确地描述湍流分布和管内非淹没气体射流速度的各向异性。但两者对于水柱加速过程的描述基本一致,只是由于LES模型的气液参混较为充分,气液速度相差较小,而可能导致两模型气体在喷口膨胀规律的异同。LES模型气液界面复杂,是用于研究管内气液流型的理想方法。该方法为三维模拟打下了较好的基础,所得结果可以作为管外射流研究的初始条件。     

高温燃气与不同构型的再生冷却面板对流传热的数值模拟

对高温燃气与带有平行冷却通道的再生冷却面板之间的三维耦合传热开展了数值研究,其中冷却通道内冷却剂为超临界压力煤油,并结合理论分析探讨了冷却面板构型对耦合传热的影响。结果表明:随燃气侧壁厚以及冷却通道宽度和高度的增大,燃气侧壁面温度升高,热流密度降低。研究还发现:冷却通道不同壁面传递给煤油的热量占比几乎不随燃气侧壁厚变化,但随冷却通道宽度和高度的改变而变化。     

Investigation on the process parameters of TIG-welded aluminum alloy through mechanical and microstructural characterization

Multi-pass TIG welding was conducted on plates (15×300×180 mm3) of aluminum alloy Al-5083 that usually serves as the component material in structural applications such as cryogenics and chemical processing industries. Porosity formation and solidification cracking are the most common defects when TIG welding Al-5083 alloy, which is sensitive to the welding heat input. In the experiment, the heat input was varied from 0.89 kJ/mm to 5 kJ/mm designed by the combination of welding torch travel speed and welding current. Tensile, micro-Vicker hardness and Charpy impact tests were executed to witness the impetus response of heat input on the mechanical properties of the joints. Radiographic inspection was performed to assess the joint's quality and welding defects. The results show that all the specimens displayed inferior mechanical properties as compared to the base alloy. It was established that porosity was progressively abridged by the increase of heat input. The results also clinched that the use of me-dium heat input (1-2 kJ/mm) offered the best mechanical properties by eradicating welding defects, in which only about 18.26% of strength was lost. The yield strength of all the welded specimens remained unaffected indicated no influence of heat input. Partially melted zone (PMZ) width also affected by heat input, which became widened with the increase of heat input. The grain size of PMZ was found to be coarser than the respective grain size in the fusion zone. Charpy impact testing revealed that the absorbed energy by low heat input specimen (welded at high speed) was greater than that of high heat input (welded at low speed) because of low porosity and the formation of equiaxed grains which induce better impact toughness. Cryogenic (-196 C) impact testing was also performed and the results corroborate that impact properties under the cryogenic environment revealed no appreciable change after welding at designated heat input. Finally, Macro and micro fractured surfaces of tensile and impact specimens were analyzed using Stereo and Scanning Electron Microscopy (SEM), which have supported the experimental findings.     

Numerical investigation on cooling performance of filter in a pyrotechnic gas generator

As a key part of the pyrotechnic gas generator,the filter not only removes the particulate matter but also cools the hot gas to a safe level.This paper aims to improve the understanding of the basic heat and flow phenomenon in the gas generator.The pyrotechnic gas generator is modelling by a simplified filter structure with fiber arrays.A finite-volume model of the heat and fluid flow is proposed to simulate the detailed multi-dimensional flow and energy conversion behaviors.Several verification results are in good agreement with data in different references.Simulation results demonstrate that the filter can not only absorb heat from the gas but also cause the high intensity enhancement of the heat transfer.The per-formance difference between inline and staggered arrays is also discussed.The findings of the study put a further prediction tool for the understanding and design of the filter system with fibers.     

有限时间热力学研究的一些进展

介绍近年来在不可逆热机理论、回热式燃气轮机循环分析、类热机装置分析和广义热力学优化理论研究中的一些进展 ,并简要阐述其发展方向 .     

无铅汽油中烯烃、芳烃含量的分析

随着环境保护意识的加强,车用无铅汽油国家标准GB 17930-1999中对烯烃、芳烃含量提出了明确限值要求。相应分析方法是GB／T 11132-2002液体石油产品烃类测定法(荧光指示剂吸附法,FIA),该方法操作过程复杂,试验时间长,试验结果偏差大。为改进对汽油中烯烃、芳烃含量的测试方法,人们在这方面做了大量研究工作。对目前采用的快速、简便分析汽油中烯烃、芳烃含量的气相色谱和近红外光谱分析方法进行了评述。