C~4ISR系统仿真测试研究

针对一种C4ISR系统在测试时的特点,提出了模拟仿真测试的方案,建立了仿真装备与指挥系统的交互模型,设计了交互对象的自动匹配算法,并在实际系统的仿真测试中得到应用和验证。     

Fabrication of AA7005/TiB2-B4C surface composite by friction stir processing: Evaluation of ballistic behaviour

The present work aims to enhance the ballistic resistance of AA7005 alloy by incorporating the TiB₂ and B₄C ceramic reinforcement particles. Surface composites with different weight fractions of TiB₂ and B₄C particles were processed by friction stir processing. Micro-hardness and depth of penetration tests were carried out to evaluate the ballistic properties of the surface composites. The surface hardness of the composite was found to be nearly 70 HV higher than base alloy. The depth of penetration of the steel projectile was 20–26 mm in the composites as compared to 37 mm in the base alloy. Ballistic mass efficiency factor of the surface composite was found to be 1.6 times higher than base alloy. This is mainly attributed to the dispersion strengthening from the reinforcement particles.     

2014—2016年FY-3C与COSMIC掩星电离层特征参数的比较

利用由FY-3C和COSMIC两个全球导航卫星系统无线电掩星任务提供的2014—2016共3年的电离层电子密度廓线，基于时间间隔7.5 min、经纬度间隔2.5°的时空匹配窗口，对两个掩星任务的电离层峰值密度（NmF2）和峰值高度（hmF2）进行了比较。结果表明：由两个任务得到的特征参数相关性良好，各年之间相关性水平基本稳定，其中各年NmF2和hmF2相关系数的平均值分别为0.87和0.75；FY-3C的特征参数相对于COSMIC的偏差很小，各年NmF2的绝对偏差均值和相对偏差均值分别不超过±0.25×10⁵ el/cm³和±15.0%，hmF2的绝对偏差均值和相对偏差均值分别不超过±7.00 km和±1.80%。此外，由两个任务得到的特征参数在空间上均表现出赤道及低纬地区数值较高且呈“条带状”分布的特点，且两个任务都监测到了2016年相对于2014年和2015年NmF2和 hmF2均存在显著下降的现象     

基于扩展Petri网的防空C~4ISRK系统建模分析

针对地空导弹武器系统防空中的火力分配问题,建立了战术级防空C4ISRK系统的Petri网模型。对其进行扩展,即联合谓词Petri网和赋色Petri网,建立旅级火力分配的改进模型,给出了具体的前置谓词公式。为有效分析战术决策的正确性提供了依据和思路。     

坦克装甲车辆火控技术的现状及发展

对坦克火控系统的技术现状和发展前景进行了较为详尽的论述,并指出了当前国内火控发展中面临的主要技术难题及解决办法.     

C2组织探索性分析框架设计研究

以验证组织优化设计方法为目的,将探索性分析思想引入组织优化设计研究,根据探索性分析的特点与组织优化设计方法验证的具体需要,对C2组织探索性分析的过程进行了研究,初步设计了面向C2组织的探索性分析框架并对其中的关键技术进行了分析。     

基于改进遗传算法的平流层飞艇定点悬停控制(英文)

平流层飞艇定点悬停控制是飞艇应用领域的关键技术。该控制问题可以转化为非线性多目标优化问题来求解。遗传算法是解决现代非线性多目标优化问题的一种重要方法。但是基本遗传算法在解决定点悬停飞艇实际控制问题时,具有易陷入局部最优解、在遗传进化过程中随机性较强、搜索效率低下及耗时多等缺陷。通过借鉴并行遗传算法、模拟退火算法和向量评价遗传算法的基本思想,在基本遗传操作中添加切断算子和拼接算子,设计一种改进遗传算法来改善上述缺陷。仿真结果表明该方法是有效可行的。     

C~3I系统试验评估方法

C3I系统试验评估是C3I系统外场试验中非常重要的一个环节.结合C3I系统外场试验的试验需求,建立了一套相对比较完整的、包含了C3I系统评估方法、评估指标体系和指标计算模型三要素在内的C3I系统试验评估体系.利用模糊的概念和变权评估方法,改进了传统的层次分析法,提出了一种变权模糊层次分析法作为C3I系统评估方法.最后,通过某防空情报指挥系统外场试验评估实例验证了该评估体系的正确性和科学性.所设计的C3I系统试验评估体系技术先进、科学实用,对C3I系统外场试验鉴定具有比较重要的指导意义.     

关于ADC法评估C~4ISR系统效能中的可靠性

针对运用ADC法评估防空C4ISR系统效能中,可靠性是影响系统效能的重要因素,对C4ISR系统的可靠性进行研究,重点分析了软件及通信网可靠性的估算公式,并在此基础上建立可用性A和可信性D数学模型.最后,通过实例分析证明了可靠性对系统效能评估的重要影响.     

Parallel machine scheduling with eligibility constraints: A composite dispatching rule to minimize total weighted tardiness

We study a parallel machine scheduling problem, where a job j can only be processed on a specific subset of machines M_j, and the M_j subsets of the n jobs are nested. We develop a two‐phase heuristic for minimizing the total weighted tardiness subject to the machine eligibility constraints. In the first phase, we compute the factors and statistics that characterize a problem instance. In the second phase, we propose a new composite dispatching rule, the Apparent Tardiness Cost with Flexibility considerations (ATCF) rule, which is governed by several scaling parameters of which the values are determined by the factors obtained in the first phase. The ATCF rule is a generalization of the well‐known ATC rule which is very widely used in practice. We further discuss how to improve the dispatching rule using some simple but powerful properties without requiring additional computation time, and the improvement is quite satisfactory. We apply the Sequential Uniform Design Method to design our experiments and conduct an extensive computational study, and we perform tests on the performance of the ATCF rule using a real data set from a large hospital in China. We further compare its performance with that of the classical ATC rule. We also compare the schedules improved by the ATCF rule with what we believe are Near Optimal schedules generated by a general search procedure. The computational results show that especially with a low due date tightness, the ATCF rule performs significantly better than the well‐known ATC rule generating much improved schedules that are close to the Near Optimal schedules. © 2017 Wiley Periodicals, Inc. Naval Research Logistics 64: 249–267, 2017