Adjacency‐based local top‐down search method for finding maximal efficient faces in multiple objective linear programming

It is well‐known that the efficient set of a multiobjective linear programming (MOLP) problem can be represented as a union of the maximal efficient faces of the feasible region. In this paper, we propose a method for finding all maximal efficient faces for an MOLP. The new method is based on a condition that all efficient vertices (short for the efficient extreme points and rays) for the MOLP have been found and it relies on the adjacency, affine independence and convexity results of efficient sets. The method uses a local top‐down search strategy to determine maximal efficient faces incident to every efficient vertex for finding maximal efficient faces of an MOLP problem. To our knowledge, the proposed method is the first top‐down search method that uses the adjacency property of the efficient set to find all maximal efficient faces. We discuss this and other advantages and disadvantages of the algorithm. We also discuss some computational experience we have had with our computer code for implementing the algorithm. This computational experience involved solving several MOLP problems with the code.     

考虑射程影响的导弹火力分配研究

火力分配问题在弹道导弹射击中具有极为重要的地位。通常,人们在考虑火力分配问题时常常认为弹道导弹的射击精度是固定不变的。事实上,弹道导弹的射击精度是随着其射程的不同而变化的。分析了导致这种变化的内在原因,研究了该因素对于火力分配问题的影响,提出了一种基于变化射程的火力分配模型。     

基于DSP+FPGA的导航计算机数据采集与处理硬件设计

根据捷联惯导系统中数据采集和运算处理的要求,提出了以高性能DSP为核心,由FPGA构成主要外部输入输出接口的导航计算机硬件设计方案;设计了I/F转换电路;给出了各电路的硬件结构框图和各器件的特性、选择与应用。从硬件方面分别讲述了FPGA和DSP的工作过程和功能。利用本方案,对实现军事和工程领域中导航系统微小型化、降低系统成本和体积具有重要意义。     

月球轨道超长波天文观测微卫星在轨数据预处理方法

围绕“嫦娥4号”月球轨道超长波天文观测微卫星展开研究，针对微纳卫星对地数传资源的限制，提出一种在轨信号预处理方法：通过10通道数字下变频链路实现原始数据的变频接收，再利用多级滤波器抽取获得低采样率基带数据，下变频本振频率可调，在对地数传资源约束下保证了不同频带数据的灵活选取。以上方法实现了一种10频点超窄带梳状滤波，仿真验证表明，采样率80 MSPS基带带宽为1 kHz的情况下，此方法可在现场可编程门阵列平台上稳定运行，能保证带内平坦度和线性相位等关键技术指标, 数据量与直接下传原始数据相比，降低了3个数量级以上。     

雷达PPI光栅扫描显示系统设计与实现

介绍一种基于微机的雷达PPI光栅扫描显示系统的设计与实现。研究了坐标快速转换、数据实时采集等关键技术,提出了优化查表法坐标转换方法以及回波数据的实时采集方案,很好满足了PPI光栅扫描显示系统中高速率、低存储量以及实时性的要求。研究成果已成功应用于某型号雷达PPI显示系统中。     

玻璃瓶动态图像检测运动模拟平台

动态图像检测中,如何在指定位置快速而准确地捕捉到运动物体的图像是最基本的环节。试验验证图像检测装置的成像特性,成为动态图像检测研究的重要内容之一。以变频器控制电动机为核心,通过变频器内部参数编程和外部简单的辅助控制电路,构建了运动平稳、速度可调、具有自动保护功能的模拟平台。该平台适于动态图像检测中普通运动物体的快速模拟,已成功地用于玻璃瓶动态图像装置中,达到了预期目的。     

Concept costing for defence projects: the problem and its solution

It is intrinsic to the nature of military competition that the unit acquisition costs of defence systems rise generation by generation. Traditional “bottom‐up” methods of cost‐estimating cannot meet the increasing demands for extensive studies of many options before commencing design and, while “top‐down” estimating techniques are an improvement, in particular by reducing the time required for preparing estimates, they also are inadequate to meet current requirements. A new method has been devised, therefore, further developing “top‐down” methods using Bayesian techniques to make best use of the available information, whether certain or uncertain, and its accuracy established by example.     

Country survey V: Poland and its arms industry

This study — which is a country survey — deals with basic problems of the functioning of the Polish arms industry in the conditions of systemic transformation, that has taken place in Poland since 1989. It also reflects new political and military conditions and changes in the economic system, commonly called marketization. The study is focused on reasons for the bad economic state of the enterprises engaged in military production, which include a drastic drop in demand on home and foreign markets. The study discusses the main direction of activities that are planned to reshape and adjust military production to the new, changed conditions covering such problems as ownership and organization changes as well as prospects for conversion.     

弹丸初速对磁阻型线圈发射器发射性能的影响分析

通过设置弹丸初速并研究其对单级磁阻型线圈发射器发射性能的影响,模拟分析前一级线圈弹丸出口速度对后一级线圈发射性能影响的规律;利用Ansoft有限元仿真软件进行了动态仿真,得到弹丸初速对单级磁阻型线圈发射器驱动电流、驱动线圈感应电压、电磁力、弹丸出VI速度、弹丸位移及能量转换效率等影响的规律．研究表明：弹丸初速越大,经过单级线圈加速后弹丸出口速度也越大,但弹丸出口速度增量减小;随着弹丸初速增大,能量转换效率呈现先增大后减小的趋势．     

A general approach to the shape of failure rate and MRL functions

Failure rate and mean residual life are two important characteristics for studying reliability of products. In literature, some work studied the shape of failure rate function based on the knowledge of the associated probability density function; some other work investigated the shape of mean residual life function based on the shape of the associated failure rate function separately for continuous case and discrete case. In this article, a general approach is developed which can be applied to the aforementioned studies. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004