锥形运动控制的导弹姿态稳定性分析

针对锥形运动对弹体稳定性的影响,建立了导弹锥形运动控制的非线性数学模型,通过引入复攻角的概念,使难以用解析手段处理的非线性模型转换成可解析的一般模型。根据线性化模型分析了导弹复攻角运动方程,推导了制导控制系统参数的稳定控制域范围,分析了控制系统阻尼回路和控制回路对导弹锥形运动稳定性的影响规律,提出了锥形运动控制的稳定性判定方法。仿真结果进一步验证了该判定方法的可行性和正确性,为导弹锥形运动的制导控制系统设计提供了依据。     

Formation of adiabatic shearing band for high-strength Ti-5553 alloy: A dramatic thermoplastic microstructural evolution

By using split Hopkinson pressure bar, optical microscopy and electronic microscopy, we investigate the influence of initial microstructures on the adiabatic shear behavior of high-strength Ti–5Al–5V–5Mo–3Cr (Ti-5553) alloy with lamellar microstructure and bimodal microstructure. Lamellar alloy tends to form adiabatic shearing band (ASB) at low compression strain, while bimodal alloy is considerably ASB-resistant. Comparing with the initial microstructure of Ti-5553 alloy, we find that the microstructure of the ASB changes dramatically. Adiabatic shear of lamellar Ti-5553 alloy not only results in the formation of recrystallized β nano-grains within the ASB, but also leads to the chemical redistribution of the alloying elements such as Al, V, Cr and Mo. As a result, the alloying elements distribute evenly in the ASB. In contrast, the dramatic adiabatic shear of bimodal alloy might give rise to the complete lamination of the globular primary α grain and the equiaxial prior β grain, which is accompanied by the dynamic recrystallization of α lamellae and β lamellae. As a result, ASB of bimodal alloy is composed of α/β nano-multilayers. Chemical redistribution does not occur in ASB of bimodal alloy. Bimodal Ti-5553 alloy should be a promising candidate for high performance armors with high mass efficiency due to the processes high dynamic flow stress and excellent ASB-resistance.     

Effect of fusion welding processes on tensile properties of armor grade,high thickness,non-heat treatable aluminium alloy joints

AA5059 is one of the high strength armor grade aluminium alloy that finds its applications in the military vehicles due to the higher resistance against the armor piercing (AP) threats. This study aimed at finding the best suitable process among the fusion welding processes such as gas tungsten arc welding (GTAW) and gas metal arc welding (GMAW) by evaluating the tensile properties of AA5059 aluminium alloy joints. The fracture path was identified by mapping the low hardness distribution profile (LHDP) across the weld cross section under tensile loading. Optical and scanning electron microscopies were used to characterize the microstructural features of the welded joints at various zones. It is evident from the results that GTAW joints showed superior tensile properties compared to GMAW joints and this is primarily owing to the presence of finer grains in the weld metal zone (WMZ) and narrow heat-affected zone (HAZ). The lower heat input associated with the GTAW process effectively reduced the size of the WMZ and HAZ compared to GMAW process. Lower heat input of GTAW process results in faster cooling rate which hinders the grain growth and reduces the evaporation of magnesium in weld metal compared to GMAW joints. The fracture surface of GTAW joint consists of more dimples than GMAW joints which is an indication that the GTAW joint possess improved ductility than GMAW joint.     

基于频率分集的阵列雷达低角跟踪算法

针对舰载X波段阵列雷达研究了低角跟踪问题,雷达工作在频率分集模式。利用复反射系数与擦地角的关系建立了多频多径条件下阵列接收信号模型。推导了多频极大似然仰角谱,揭示了多频体制抑制仰角模糊的机理,推导出了仰角谱栅瓣间隔,分析了系统带宽对仰角谱的影响。提出谱峰正确选择概率来度量测角性能,通过仿真研究了SNR、目标仰角对仰角谱估计精度的影响,给定目标仰角条件下得到了满足测角精度要求的最小SNR,最小SNR随目标仰角增加并非严格单调下降。     

实际复摆的非线性振荡系统

本文建立了实际复摆振荡系统的非线性模型,并用一阶谐波平衡法导出各种特征状态函数,从而分析计算定常周期及其运动稳定性、稳定分支振荡的跳跃特性和最大振幅特性。本文利用可控力矩激振装置成功地实现了复摆的强迫振荡实验。实例表明不仅能准确地辩识实际复摆非线性模型的参数,而且实测到复摆的稳定分支振荡和跳跃现象,从而实验验证了实际复摆非线性振荡的理论分析。     

人工免疫系统的战场异态电磁信号检测模型

分析了复杂电磁信号环境下电磁信号监测的现实需求,抽象出"异态电磁信号"的概念。结合人工免疫系统建立起基于人工免疫系统的适用于复杂电磁环境下异态电磁信号检测模型,初步的信号检测实验表明该模型在信号检测准确性、检测时间等方面具有一定优势。     

基于复杂系统的组网雷达系统分析

分析了常规单基雷达演化成组网雷达的过程,并运用复杂系统的基本属性———差异性、多样性、相关性和整体性,分析了组网雷达演化的机理。然后指出组网雷达整体涌现具体表现为作战能力的提高和“四抗”能力的飞跃。最后分析了组网雷达作为复杂系统,网内雷达站之间的数据融合是其涌现的动力学机制。     

钢管约束混凝土抗多发打击试验

为研究钢管约束混凝土抗多发打击性能,进行了12.7 mm穿甲弹多发打击钢管约束混凝土厚靶试验,得到靶的损伤模式和侵彻深度,并建立重复打击侵彻深度预测公式。结果表明:厚度为300 mm的小直径钢管约束混凝土靶能够有效防御3发12.7 mm穿甲弹的重复打击,第二、第三发较前一发侵彻深度的增幅分别小于20%和10%;重复打击侵彻深度预测公式与试验吻合较好。研究结果可为钢管约束混凝土防枪弹结构和遮弹层结构的研究提供参考。     

Country survey XVI the defence sector in the economy of a declining superpower: Soviet Union and Russia, 1965-2001

The Soviet Union was able to develop a large military-industrial complex and become the world's second superpower despite deficiencies in its centrally planned economy because defence was given high priority status and special planning, rationing and administrative mechanisms were used to attain national security objectives. However, in the period 1976-85 the effectiveness of priority protection diminished and defence institutions experienced more of the problems typical of the shortage economic system. The heavy defence burden also created growing difficulties for the civilian economy. The attempts by the Gorbachev government to reform the defence sector and improve defence-economic relationships during perestroika (1985-91) uniformly failed. For most of the transition period, the Russian military-industrial complex has been adversely affected by its low priority status, cuts in defence spending, instability of the hybrid politico-economic system, and negative growth of the economy. The armed forces and defence industry have been reduced in size and their outputs of military services and equipment have fallen to low levels. Nevertheless, the Russian armed forces still have over one million troops, significant stocks of sophisticated conventional weapons, and a large nuclear arsenal. The government of President Putin has raised the priority of the defence sector, increased real defence spending, and adopted ambitious plans to revive Russian military power. It is likely, though, that tight resource constraints will hamper efforts to reform the armed forces and to upgrade weapons. By 2010 Russia will be an important, but not dominant, military power in Eurasia.     

复杂武器中人系整合分析与评估前沿技术研究进展

文章介绍了以美国为主的军事发达国家的人系整合分析与评估的前沿技术、相应的平台及它们的应用情况,也介绍了我国在该方向的研究现状与不足。最后对武器装备人系整合设计分析与评估提出了发展建议。