三维均匀化理论预测多孔混凝土等效弹性模量

应用多尺度渐进展开的均匀化理论,推导三维均匀化理论的有限元解法,求解复合材料等效弹性系数。假设多孔混凝土由光滑均匀一致的球孔与水泥石基质组成,提出改进的随机投放方法,生成三维均匀化理论求解的随机单胞模型。以聚苯乙烯泡沫(EPS)混凝土为数值算例,生成6组不同体积分数的EPS混凝土随机单胞模型,通过三维均匀化理论的有限元法计算得到其等效弹性模量。计算结果表明:随机单胞模型能反映细观的非均质性,三维均匀化理论的有限元法计算得到的等效弹性模量变化趋势比较符合Miled的试验结果。     

A novel formulation of material nonlinear analysis in structural mechanics

This article demonstrates a novel approach for material nonlinear analysis. This analysis procedure eliminates tedious and lengthy step by step incremental and then iterative procedure adopted classically and gives direct results in the linear as well as in nonlinear range of the material behavior. Use of elastic moduli is eliminated. Instead, stress and strain functions are used as the material input in the analysis procedure. These stress and strain functions are directly derived from the stress-strain behavior of the material by the method of curve fitting. This way, the whole stress-strain diagram is utilized in the analysis which naturally exposes the response of structure when loading is in nonlinear range of the material behavior. It is found that it is an excellent computational procedure adopted so far for material nonlinear analysis which gives very accurate results, easy to adopt and simple in calculations. The method eliminates all types of linearity assumptions in basic derivations of equations and hence, eliminates all types of possibility of errors in the analysis procedure as well. As it is required to know stress distribution in the structural body by proper modelling and structural idealization, the proposed analysis approach can be regarded as stress-based analysis procedure. Basic problems such as uniaxial problem, beam bending, and torsion problems are solved. It is found that approach is very suitable for solving the problems of fracture mechanics. Energy release rate for plate with center crack and double cantilever beam specimen is also evaluated. The approach solves the fracture problem with relative ease in strength of material style calculations. For all problems, results are compared with the classical displacement-based liner theory.     

计划中的时序偏好表示和非单调推理

针对行动序列计划中的时序偏好问题开展研究,重点关注时序偏好集合内部存在不一致性时完成行动计划的方法。论文的难点和创新点体现在两个方面。针对时序偏好的表示问题,建立了一种二元描述结构,能够实现对时序约束和时序偏好的归一化描述。使用计算辩论技术建立推理框架,用以排除约束/偏好集合中的冲突关系,获得具有最大一致性的约束/偏好子集。在此基础上建立了一种新的计划生成策略,通过映射的方法得到行动序列片段,组合这些片段后形成完整的行动序列计划。通过实例验证了方法的可行性。     

基于运动一致性的视频对象分割方法研究

视频运动对象检测和分割是图像处理中最具挑战性的问题之一。针对目前大部分分割算法相当复杂而且计算量大的问题,提出了一种基于运动一致性的视频对象分割方法。该方法从MPEG压缩码流中提取运动矢量场来分割视频对象,首先对运动矢量场进行滤波和校正,然后进行全局运动补偿得到对象的绝对运动矢量场,最后采用K-means聚类算法对运动矢量场进行聚类分析从而分割出感兴趣的视频运动对象。MPEG标准测试序列的试验结果证明,该方法是有效的。     

弯管稀相气力输送CFD-DEM法数值模拟

利用CFD-DEM方法对稀相气固两相流在带有弯管的气力输送管道内的流动特性数值模拟。通过CFD求解连续气相流场,使用DEM求解离散颗粒相运动及受力,为提高仿真速度,模型忽略了空隙度对气相的影响。仿真结果显示了颗粒在弯管内形成颗粒绳及在垂直管道内颗粒绳分散的过程,并获取了颗粒-颗粒、颗粒-壁面的碰撞信息。对比弯管上下两部分的碰撞情况,颗粒及壁面在弯管下半部分受到的撞击和磨损更严重。通过对气力输送各类工作参数的研究发现,其对管道内气固两相流的流动特性和碰撞情况有着不同程度的影响。气流速度对颗粒绳分散影响甚微,但对弯管内颗粒碰撞强度有明显影响。随着颗粒质量流量的增加,形成的颗粒绳更紧凑、分散速度更慢,并在弯管中形成了阻碍颗粒-壁面碰撞的防护层。弯径比的增加也能加强颗粒绳的紧凑度,减缓颗粒绳的分散速度。     

PCP系统的优化对船舶水下电场的抑制作用

为了达到抑制水下电场特征的目的,需要使船身电位保持均匀。采用边界元法建立了空气-海水两层介质中的船体模型,通过改变牺牲阳极阴极保护系统中牺牲阳极的数量和分布,定量计算了不同保护状态下的船身电位和水下电场,并进行了实验室船模实验。仿真和实验结果均表明:对阴极保护系统进行合理的设计,使阳极与腐蚀区域之间保护电流的作用距离缩短并使多个阳极共同承担同一区域的防腐功能,能够降低单个阳极输出保护电流的强度,提高船身电位的均匀化程度,在达到防腐效果的同时起到抑制水下电场的目的。     

Simulation on the dynamic stability derivatives of battle-structure-damaged aircrafts

Accurately evaluating the aerodynamic performance of a battle-structure-damaged aircraft is essential to enable the pilot to optimize the flight control strategy. Based on CFD and rigid dynamic mesh techniques, a numerical method is developed to calculate the longitudinal and longitudinal-lateral coupling forces and moments with small amplitude sinusoidal pitch oscillation, and the corresponding dynamic de-rivatives of two fragment-structure-damaged and two continuous-rod-damaged models modified from the SACCON UAV. The results indicate that, at the reference point set in this paper, additional positive damping is generated in fragment-damaged configurations; thus, the absolute values of the negative pitch dynamic derivative increase. The missing wingtip induces negative pitch damping on the aircraft and decreases the value of the pitch dynamic derivative. The missing middle wing causes a noticeable increase in the absolute value of the pitch dynamic derivative;the missing parts on the right wing cause the aircraft to roll to the right side in the dynamic process, and the pitch-roll coupling cross dynamic derivatives are positive. Moreover, the values of these derivatives increase as the damaged area on the right wing increases, and an optimal case with the smallest cross dynamic derivative can be found to help improve the survivability of damaged aircraft.     

Effect of functionally-graded interphase on the elasto-plastic behavior of nylon-6/clay nanocomposites; a numerical study

In nanocomposites, the interphase thickness may be comparable to the size of nano-particles, and hence, the effect of interphase layers on the mechanical properties of nanocomposites may be substantial. The interphase thickness to the nano-particle size ratio and properties variability across the interphase thickness are the most important affecting parameters on the overall behavior of nanocomposites. In this study, the effect of properties variability across the interphase thickness on the overall elastic and elasto-plastic properties of a polymeric clay nanocomposite (PCN) using a functionally graded (FG) interphase is investigated in detail. The results of the computational homogenization on the mesoscopic level show that Young's modulus variation of the interphase has a significant effect on the overall elastic response of nanocomposites in a higher clay weight ratio (Wt). Moreover, strength variation through the interphase has a notable effect on the elasto-plastic properties of PCNs. Also, the increase or decrease in stiffness of interphase from clay to matrix and vice versa have a similar effect in the overall behavior of nanocomposites.     

Analysis of hydrodynamic characteristics of unmanned underwater vehicle moving close to the sea bottom

The accurate research on the hydrodynamics of unmanned underwater vehicle (UUV), which moves close to the sea bottom, has a great significance for its maneuverability. The structured grid of the computational models with different distances to the sea bottom and attack angles is generated by Ansys ICEM, and the flow field near the sea bottom is simulated using CFX. The characteristics of the drag, lift, pitching moment influenced by the distance to sea bottom and the attack angle are studied. The result shows that the drag coefficient increases with the decrease of distance, while it increases with the increase of attack angle. There exists attraction force when UUV moves close to the sea bottom, and the attraction force increases with the decrease in distance. The lift coefficient increases with the increase in attack angle. The absolute value of the pitching moment coefficient increases with the decrease in distance and the increase in attack angle.     

计算流体动力学在隧道安全中的应用

总结分析了近年国内外重大隧道火灾事故，简述了隧道火灾的特点、危害性及其烟气控制方法，回顾了国内外对隧道火灾的研究现状。着重介绍了计算流体动力学（CFD）在隧道通风安全中的应用。同时总结了国内外在研究隧道火灾方面应用CFD模拟所作的一些基本工作，并描述近来在隧道安全工程的一些典型应用。