Production to order and off‐line inspection when the production process is partially observable

This study combines inspection and lot‐sizing decisions. The issue is whether to INSPECT another unit or PRODUCE a new lot. A unit produced is either conforming or defective. Demand need to be satisfied in full, by conforming units only. The production process may switch from a “good” state to a “bad” state, at constant rate. The proportion of conforming units in the good state is higher than in the bad state. The true state is unobservable and can only be inferred from the quality of units inspected. We thus update, after each inspection, the probability that the unit, next candidate for inspection, was produced while the production process was in the good state. That “good‐state‐probability” is the basis for our decision to INSPECT or PRODUCE. We prove that the optimal policy has a simple form: INSPECT only if the good‐state‐probability exceeds a control limit. We provide a methodology to calculate the optimal lot size and the expected costs associated with INSPECT and PRODUCE. Surprisingly, we find that the control limit, as a function of the demand (and other problem parameters) is not necessarily monotone. Also, counter to intuition, it is possible that the optimal action is PRODUCE, after revealing a conforming unit. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

An adaptive forecasting algorithm and inventory policy for products with short life cycles

Products with short life cycles are becoming increasingly common in many industries, such as the personal computer (PC) and mobile phone industries. Traditional forecasting methods and inventory policies can be inappropriate for forecasting demand and managing inventory for a product with a short life cycle because they usually do not take into account the characteristics of the product life cycle. This can result in inaccurate forecasts, high inventory cost, and low service levels. Besides, many forecasting methods require a significant demand history, which is available only after the product has been sold for some time. In this paper, we present an adaptive forecasting algorithm with two characteristics. First, it uses structural knowledge on the product life cycle to model the demand. Second, it combines knowledge on the demand that is available prior to the launch of the product with actual demand data that become available after the introduction of the product to generate and update demand forecasts. Based on the forecasting algorithm, we develop an optimal inventory policy. Since the optimal inventory policy is computationally expensive, we propose three heuristics and show in a numerical study that one of the heuristics generates near‐optimal solutions. The evaluation of our approach is based on demand data from a leading PC manufacturer in the United States, where the forecasting algorithm has been implemented. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004.     

Dual sourcing: Responsive hedging against correlated supply and demand uncertainty

This article analyzes dual sourcing decisions under stochastically dependent supply and demand uncertainty. A manufacturer faces the trade‐off between investing in unreliable but high‐margin offshore supply and in reliable but low‐margin local supply, where the latter allows for production that is responsively contingent on the actual demand and offshore supply conditions. Cost thresholds for both types of supply determine the optimal resource allocation: single offshore sourcing, single responsive sourcing, or dual sourcing. Relying on the concept of concordance orders, we study the effects of correlation between supply and demand uncertainty. Adding offshore supply to the sourcing portfolio becomes more favorable under positive correlation, since offshore supply is likely to satisfy demand when needed. Selecting responsive capacity under correlated supply and demand uncertainty is not as straightforward, yet we establish the managerially relevant conditions under which responsive capacity either gains or loses in importance. Our key results are extended to the broad class of endogenous supply uncertainty developed by Dada et al. [Manufact Serv Operat Mange 9 (2007), 9–32].© 2012 Wiley Periodicals, Inc. Naval Research Logistics, 2012     

对当前消防部队信息化建设的思考

目前消防部队信息化建设取得了初步成效,但与部队需求还存在一定差距,存在着对信息化建设认识不够高、信息化应用不深入、专业人才偏少、人员素质偏低、投入资金不足等问题,并针对存在的问题提出了解决对策。     

箱式屏蔽效能测试方法及影响因素分析

为测试强电磁场作用下材料的屏蔽效能,基于屏蔽材料的屏蔽原理,提出一种在GTEM室内置屏蔽箱测试材料屏蔽效能的新方法,构建实验平台,仿真分析屏蔽箱窗口尺寸及测试探头位置对测试结果的影响．实验结果表明：测试窗口大小和测试位置对测试材料的屏蔽效能有影响．其主要影响因素是屏蔽效能的测试频率下限,并确定了0．6m×0．6m窗口的测试频率下限为55MHz,0．3m×0．3m测试窗口的测试频率下限为250MHz．     

Contracts and coordination: Supply chains with uncertain demand and supply

Considering a supply chain with a supplier subject to yield uncertainty selling to a retailer facing stochastic demand, we find that commonly studied classical coordination contracts fail to coordinate both the supplier's production and the retailer's procurement decisions and achieve efficient performance. First, we study the vendor managed inventory (VMI) partnership. We find that a consignment VMI partnership coupled with a production cost subsidy achieves perfect coordination and a win‐win outcome; it is simple to implement and arbitrarily allocates total channel profit. The production cost subsidy optimally chosen through Nash bargaining analysis depends on the bargaining power of the supplier and the retailer. Further, motivated by the practice that sometimes the retailer and the supplier can arrange a “late order,” we also analyze the behavior of an advance‐purchase discount (APD) contract. We find that an APD with a revenue sharing contract can efficiently coordinate the supply chain as well as achieve flexible profit allocation. Finally, we explore which coordination contract works better for the supplier vs. the retailer. It is interesting to observe that Nash bargaining solutions for the two coordination contracts are equivalent. We further provide recommendations on the applications of these contracts. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 305–319, 2016     

舰船装备随行备件量需求规律分析

通过对舰船装备备件需求影响因素的分析 ,从理论上推导了备件需求的分布规律 ,在此基础上建立了舰船级备件典型需求模型 ,并且对典型的故障分布模型进行了推广     

Effectiveness of (R,Q) policies in one‐warehouse multiretailer systems with deterministic demand and backlogging

Consider a distribution system with a central warehouse and multiple retailers. Customer demand arrives at each of the retailers continuously at a constant rate. The retailers replenish their inventories from the warehouse which in turn orders from an outside supplier with unlimited stock. There are economies of scale in replenishing the inventories at both the warehouse and the retail level. Stockouts at the retailers are backlogged. The system incurs holding and backorder costs. The objective is to minimize the long‐run average total cost in the system. This paper studies the cost effectiveness of (R, Q) policies in the above system. Under an (R, Q) policy, each facility orders a fixed quantity Q from its supplier every time its inventory position reaches a reorder point R. It is shown that (R, Q) policies are at least 76% effective. Numerical examples are provided to further illustrate the cost effectiveness of (R, Q) policies. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 422–439, 2000     

Applying a bootstrap approach for setting reorder points in military supply systems

This paper develops and applies a nonparametric bootstrap methodology for setting inventory reorder points and a simple inequality for identifying existing reorder points that are unreasonably high. We demonstrate that an empirically based bootstrap method is both feasible and calculable for large inventories by applying it to the 1st Marine Expeditionary Force General Account, an inventory consisting of $20–30 million of stock for 10–20,000 different types of items. Further, we show that the bootstrap methodology works significantly better than the existing methodology based on mean days of supply. In fact, we demonstrate performance equivalent to the existing system with a reduced inventory at one‐half to one‐third the cost; conversely, we demonstrate significant improvement in fill rates and other inventory performance measures for an inventory of the same cost. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 459–478, 2000     

An optimal recursive method for various inventory replenishment models with increasing demand and shortages

We establish various inventory replenishment policies to solve the problem of determining the timing and number of replenishments. We then analytically compare various models, and identify the best alternative among them based on minimizing total relevant costs. Furthermore, we propose a simple and computationally efficient optimal method in a recursive fashion, and provide two examples for illustration. © 1997 John Wiley & Sons, Inc. Naval Research Logistics 44: 791–806, 1997