流动粉浆输送装置的研究

为减轻环卫工和建筑工人劳动强度和提高工作效率,在已有螺旋输送机的工作原理基础上,进行创新。将螺旋片由刚性连接改为柔性连接,将硬管改为软管。经过试验,在选择了一定的工艺参数后,使刚性的螺旋片和柔性的胶管之间,有较好的配合效果,从而实现了螺旋输送机械,可以在输送管道有一定弯曲的条件下,运送砂浆的功能。该研究有一定的实用价值和社会意义。加工制造工艺不复杂,有利于普及。     

高架仓库应用超细干粉灭火系统可行性分析

高架仓库具有高度高、空间大、货物分层密集存放、灭火难度大等特点,而超细干粉灭火装置灭火剂释放后,达到灭火浓度的粉雾能够迅速弥漫保护空间,笼罩保护物。在对高架仓库常见灭火系统进行分析的基础上,提出了超细干粉灭火系统在立体货架上分层布置、分区启动的应用形式及方法,并通过模拟灭火试验,分析了超细干粉灭火系统应用于高架仓库的可行性。结果表明：超细干粉灭火系统可有效扑灭高架仓库初期火灾。     

华东烧结模型的数学计算(Ⅱ)

通过热力学分析和数学计算，讨论颗粒呈现面心立方堆积方式时，华东烧结模型中膨胀机制和收缩机制对烧结体总表面能的作用和总孔隙度比变化的影响，计算表明烧结过程中收缩机制占主导地位。     

超细干粉自动灭火装置在民用建筑中的应用前景分析

指出了超细干粉和超细干粉自动灭火装置的技术特点,并通过与其他自动灭火系统的比较,分析了超细干粉自动灭火装置在民用建筑中的应用前景。     

Buckling analysis of embedded graphene oxide powder-reinforced nanocomposite shells

In this study, the buckling analysis of a Graphene oxide powder reinforced (GOPR) nanocomposite shell is investigated. The effective material properties of the nanocomposite are estimated through Halpin-Tsai micromechanical scheme. Three distribution types of GOPs are considered, namely uniform, X and O. Also, a first-order shear deformation shell theory is incorporated with the principle of virtual work to derive the governing differential equations of the problem. The governing equations are solved via Galerkin's method, which is a powerful analytical method for static and dynamic problems. Comparison study is performed to verify the present formulation with those of previous data. New results for the buckling load of GOPR nanocomposite shells are presented regarding for different values of circumfer-ential wave number. Besides, the influences of weight fraction of nanofillers, length and radius to thickness ratios and elastic foundation on the critical buckling loads of GOP-reinforced nanocomposite shells are explored.     

活性粉末混凝土200（RPC200）的配制试验研究

进行了活性粉末混凝土(RPC)的配制试验,通过5批试件分别探讨砂灰比、石英粉、硅灰、水胶比和钢纤维等因素单值变化时对RPC流动度以及抗折强度、抗压强度的影响.研究表明:在常规制作工艺条件下,配制出抗压强度和抗折强度分别为145.6 MPa和26.68MPa的无纤维RPC;当钢纤维含量为6%时,RPC的抗压强度和抗折强度分别达到了201.3MPa和73.67 MPa.     

氮气保护法在微细铝粉生产中的应用

雾化空气法生产微细铝粉已有近 70年历史 ,但其生产过程极易发生爆炸 ,氮气由于其良好的防火性能 ,在生产中代替空气将会极大降低爆炸的可能性。     

A quasi-isentropic model of a cylinder driven by aluminized explosives based on characteristic line analysis

A quasi-isentropic study on the process of driving a cylinder with aluminized explosives was carried out to examine the influence of the aluminum (Al) reaction rate on cylinder expansion and the physical parameters of the detonation products. Based on the proposed quasi-isentropic hypothesis and relevant isentropic theories, the characteristic lines of aluminized explosives driving a cylinder were analyzed, and a quasi-isentropic model was established. This model includes the variation of the cylinder wall velocity and the physical parameters of the detonation products with the Al reaction degree. Using previously reported experimental results, the quasi-isentropic model was verified to be applicative and accurate. This model was used to calculate the physical parameters for cylinder experiments with aluminized cyclotrimethylenetrinitramine explosives with 15.0 % and 30.0 % Al content. The results show that this quasi-isentropic model can be used not only to calculate the cylinder expansion rule or Al reaction degree, but also to calculate the physical parameters of the detonation products in the process of cylinder expansion. For explosives with 15.0 % and 30.0 % Al, 24.3 % and 18.5 % of the Al was found to have reacted at 33.9 μs and 34.0 μs, respectively. The difference in Al content results in different reaction intensity, occurrence time, and duration of two forms of reaction (diffusion and kinetic) between the Al powder and the detonation products; the post-detonation burning reaction between the Al powder and the detonation products prolongs the positive pressure action time, resulting in a continuous rise in temperature after detonation.     

火炮发射药装药自动识别方法

发射装药号是影响火炮身管寿命的重要因素,为自动识别火炮发射药的装药号,避免人工记录失误和完善火炮射弹履历,分析了装药号自动识别原理,运用火炮动力学分析理论和ADAMS虚拟样机技术,建立火炮发射动力学虚拟样机.通过仿真试验获取样本数据,应用BP神经网络进行学习和训练,从而建立装药号和测试数据之间的非线性映射关系,实现对火炮发射装药号的精确预测.     

超细粒子对环氧树脂的增韧改性研究

用NW-2辛酯偶联剂改性过的复合氧化锌(ZnO)超细粒子对环氧树脂进行增韧,借助于SEM和力学性能测试手段研究了ZnO粒子的形貌以及NW-2辛酯偶联剂改性复合ZnO粒子在环氧树脂体系中的增韧情况及其机理.结果表明:经过NW-2辛酯偶联剂改性的复合超细ZnO粒子对环氧树脂具备良好的增韧效果.