横向效应增强型弹丸正侵穿金属薄靶轴向剩余速度近似计算与分析

运用冲击波理论,对横向效应增强型弹丸(Penetration with Enhanced Lateral Efficiency,PELE)侵穿金属靶板的机理进行了分析,将PELE侵彻过程中能量损失分为外壳撞击靶板区域环形塞块获得的能量,内芯撞击靶板区域塞块获得的能量,冲击波影响范围内外壳和内芯增加的内能,外壳前端外沿和内沿对靶板冲塞剪切耗能等几部分,给出了确定这些能量的计算方法;并依据能量守恒原理,给出了PELE正撞金属薄靶板靶后剩余速度的近似计算公式。公式计算结果与多种条件下实验结果均吻合较好。分析计算所得各能量损失结果表明,弹体内芯材料的变化对弹体侵彻能力的影响较小;侵彻中靶板塞块获得的能量在弹体侵彻动能损失中比重最大;外壳前端内沿对靶板的剪切能耗对弹体动能损失的影响可以忽略。     

半预制破片PELE弹丸对武装直升机毁伤效能

为研究半预制破片PELE弹丸对武装直升机的毁伤效能,选取代表性的阿帕奇武装直升机为研究对象,建立了阿帕奇武装直升机关键部件驾驶舱和发动机舱的等效模型,在此基础上应用ANSYS/LS-DYNA就半预制破片PELE弹丸对阿帕奇武装直升机的毁伤效能进行了数值分析.结果表明:半预制破片PELE弹丸能有效穿透阿帕奇武装直升机的防护装甲,在穿透防护靶后弹丸壳体大面积碎裂,产生大量具有较高轴向剩余速度和一定径向飞散速度的破片,形成一个大面积的破片场,这些破片及弹丸剩余部分可对武装直升机内部人员及仪器设备造成有效毁伤,极大地增强了PELE弹丸的毁伤效能.     

均匀设计法在建立PELE爆裂效应关系模型中的应用

为了研究钢壳体PELE爆裂效应与影响因素之间的数学关系,对钢壳体PELE侵彻钢板进行了数值仿真和试验。采用均匀设计法设计仿真工况,将仿真结果进行回归分析,得出爆裂效应与影响因素之间的数学关系式,实弹侵彻实验结果与仿真结果基本吻合。研究表明,影响因素均与壳体爆裂长度成非线性关系,增大靶板厚度、弹芯长度和着速或减小壳体厚度均有利于提高钢壳体的爆裂效应。相关结论为PELE的工程设计和应用提供了理论基础。     

Opening behavior of PELE perforation on reinforced concrete target

Impact velocity (v0), target strength (fc) and target thickness (hc) are important factors affecting opening damage ((D)) of PELE penetration into RC target. In this paper, based on the three influence factors of v0, fc and hc, experimental and numerical simulation studies on PELE penetration into RC target were carried out. The study results show that: (1) Since interaction force (or penetration resistance) between pro-jectile and target is positively correlated with v0 and fc, with the increase of v0 and fc, deformation mode of jacket is changed from small bending deformation to large bending deformation and then to curling deformation. Therefore, the variation of jacket deformation mode causes opening diameter of RC target to increase first and then to decrease. It is found that the two factors approximately satisfy a quadratic function relationship, respectively. (2) For PELE projectile penetrating RC targets with thickness of 80—400 mm, the opening diameter of six sets of RC targets grows from 240 to 500 mm, and hc with (D) approximately satisfy a linear relationship. (3) Based on the above study results, the relationship be-tween two dimensionless parameters (I= (mv20/d31fc) and H= hc/l ) and dimensionless opening diameter ((D)/d1) was determined. Combined with the results of previous research, a dimensionless opening diameter model (D)/d1=f1(Q,G,I)f2(H) was established. By tests verified, the test results are all within ±10％error of the theoretical model, which verifies the accuracy of the model.     

Damage of multi-layer spaced metallic target plates impacted by radial layered PELE

Three different kinds of PELE (the penetrator with lateral efficiency) were launched by ballistic artillery to impact the multi-layer spaced metal target plates. The impact velocities of the projectiles were measured by the velocity measuring system. The damage degree and process of each layer of target plate impacted by the three kinds of projectiles were analyzed. The experimental results show that all the three kinds of projectiles have the effect of expanding holes on the multi-layer spaced metal target plates. For the normal structure PELE(without layered) with tungsten alloy jacket and the radial layered PELE with tungsten alloy jacket, the diameters of holes on the second layer of plates are 3.36 times and 3.76 times of the diameter of the projectile, respectively. For radial layered PELE with W/Zr-based amorphous composite jacket, due to the large number of tungsten wires dispersed after the impact, the diameter of the holes on the four-layer spaced plates can reach 2.4 times, 3.04 times, 5.36 times and 2.68 times of the diameter of the projectile. Besides, the normal structure PELE with tungsten alloy jacket and the radial layered PELE whit tungsten alloy jacket formed a large number of fragments impact marks on the third target plate. Although the number of fragments penetrating the third target plate is not as large as that of the normal structure PELE, the area of dispersion of fragments impact craters on the third target plate is larger by the radial layered PELE. The radial layered PELE with W/Zr-based amorphous composite jacket released a lot of heat energy due to the impact of the matrix material, and formed a large area of ablation marks on the last three target plates.