非均匀径向冲击下圆柱壳塑性动屈曲

本文采用王仁等提出的塑性动力屈曲的能量准则讨论了圆柱壳在不均匀的外部径向冲击下的塑性动屈曲问题,获得了屈曲的占优波数公式及临界冲击速度公式。经过初步实验,证明本文的结论是合理的,并进一步证实了该能量准则的有效性。     

Multi-objective design optimization of composite submerged cylindrical pressure hull for minimum buoyancy and maximum buckling load capacity

This paper presents the design optimization of composite submersible cylindrical pressure hull subjected to 3 MPa hydrostatic pressure. The design optimization study is conducted for cross-ply layups [0s/90t/0u], [0s/90t/0u]s, [0s/90t]s and [90s/0t]s considering three uni-directional composites, i.e. Carbon/Epoxy, Glass/Epoxy, and Boron/Epoxy. The optimization study is performed by coupling a Multi-Objective Genetic Algorithm (MOGA) and Analytical Analysis. Minimizing the buoyancy factor and maximizing the buckling load factor are considered as the objectives of the optimization study. The objectives of the optimization are achieved under constraints on the Tsai-Wu, Tsai-Hill and Maximum Stress composite failure criteria and on buckling load factor. To verify the optimization approach, optimization of one particular layup configuration is also conducted in ANSYS with the same objectives and constraints.     

加肋圆柱壳结构的FE-IE算法网格尺度划分原则

为了研究结构有限元耦合流体无限元算法的网格尺度划分原则,提出有限元-无限元算法中结构湿表面的网格尺度划分原则。数值计算结果表明,对加肋圆柱壳而言,在保证一个肋骨间距至少有2个有限元单元的前提下,将结构主振型弯曲波波长作为有限元-无限元算法中结构湿表面网格尺度划分的参考标准是可行的,即保证一个主振型分量波长内至少有6个有限元单元。提出以结构主振型分量的弯曲波波长(而不是最短的结构波长)作为有限元-无限元算法中网格尺度划分的参考标准,所得结论对于有限元-无限元算法中结构湿表面的网格划分以及控制内域流体有限元数量均具有十分重要的参考意义。     

The mechanism of liquid dispersing from a cylinder driven by central dynamic shock loading

A systematic investigation on the mechanism of dynamic liquid dispersing process via theoretical and experimental approach is presented. The experiments include weak and strong constrained scenarios using the high-speed camera technique and the flash X-ray radiography technique. Based on dynamic analysis, one-dimensional characteristics analysis and some numerical simulations on the propagating processes of blast waves before the container shell rupturing, further and detailed analyses of the experimental results are presented. The effects of the liquid viscosity on the dynamic dispersing flow are also analyzed, and the spall fracture mechanism is explored. Thus, the dominating forces determining the dispersing liquid flow are revealed, that is, the stretching and shearing action due to the interaction of two reflecting rarefaction waves in opposite propagating directions. The influence of container shell strength on the dispersing liquid flow is also investigated, and the characters of cavitation layered in liquid before shell rupturing are uncovered. Results revealed that different shell material results in different cavitating layers. Then the different cavitating layers drive the different dynamic liquid dispersing process coming into being. The metastable liquid states caused by pressure drop and cavi-tation generation are discussed.     

敷设气囊的充水圆柱壳的声辐射

为降低充水圆柱壳受内部点声源激励时的水下辐射噪声，在其外壳上敷设气囊，形成气囊圆柱壳。为指导气囊圆柱壳的设计，将充水裸圆柱壳和充水气囊圆柱壳分别简化为单、双层无限长隔板。比较隔板、气体与水的波阻抗，分析了气体声速与层厚对双层无限长隔板在平面声波入射时低频声辐射的影响机理。分析表明，声速小的气体和适当的气层厚度可以降低双层障板的辐射噪声。采用声无限元法计算了气囊圆柱壳的水下声辐射，结论与对隔板的机理分析吻合。优化设计出的充水CO2气囊圆柱壳的水下辐射声功率与远场辐射声压明显低于充水裸圆柱壳。     

均匀外压下纵横加筋曲板和圆柱壳的稳定性

建立了纵横加筋圆柱曲板和圆柱壳的弹性稳定性临界压力公式．对文献中关于大直径环肋薄壳的异常及潜艇实肋板带纵骨式耐压液舱壳板的稳定性进行了计算,并探讨筋条的偏心、纵筋数目的奇偶性对壳体稳定性的影响     

用于复合材料板、壳结构的退化的等参壳元

研究了用于复合材料板、壳结构分析的退化的等参壳元．数值计算结果表明,该单元不仅适合厚的和中厚的复合材料板、壳结构的分析,而且在采用了“节减积分”或“选择积分”技术之后,也同样适合复合材料薄板和薄壳的计算．     

某型穿甲弹弹托轻量化仿真研究

为了减小弹托消极质量,提高某型穿甲弹的威力,运用Ansys11.0软件的Workbench平台,采用瞬态动力学方法对某型穿甲弹的发射强度进行了仿真,结果表明:该弹弹托马鞍部和尾椎部的强度裕度较大。通过在马鞍部钻孔和尾椎部开槽,在满足发射强度要求的前提下可减轻弹托质量170 g,从而使该型穿甲弹的炮口初速提高了16.25 m/s,进而使该型穿甲弹对既定目标的有效穿透距离增加了270 m左右。