基于复—方向小波变换和视觉表示的图像增强

针对复—方向小波变换具有好的平移不变性、方向选择性、对图像边缘特征的表示比传统实小波要好等优势,提出了一种基于视觉表示统计特性和复—方向小波变换的图像增强新方法。该算法在图像的多尺度复—方向小波变换域内进行动态范围(亮度)修正和局部对比度调整以增强图像。实验结果表明,与目前经典的多尺度增强算法相比,运用本文的算法增强的图像视觉效果好,在边缘和细节处失真小,而且对图像源的变化具有很好的鲁棒性。     

A spatial rank‐based multivariate EWMA control chart

Nonparametric control charts are useful in statistical process control when there is a lack of or limited knowledge about the underlying process distribution, especially when the process measurement is multivariate. This article develops a new multivariate self‐starting methodology for monitoring location parameters. It is based on adapting the multivariate spatial rank to on‐line sequential monitoring. The weighted version of the rank‐based test is used to formulate the charting statistic by incorporating the exponentially weighted moving average control scheme. It is robust to non‐normally distributed data, easy to construct, fast to compute and also very efficient in detecting multivariate process shifts, especially small or moderate shifts which occur when the process distribution is heavy‐tailed or skewed. As it avoids the need for a lengthy data‐gathering step before charting and it does not require knowledge of the underlying distribution, the proposed control chart is particularly useful in start‐up or short‐run situations. A real‐data example from white wine production processes shows that it performs quite well. © 2012 Wiley Periodicals, Inc. Naval Research Logistics 59: 91–110, 2012     

基于结构加权的海面编队预定目标选择方法

海面目标运动和编队阵型的约束特性,使得通过对装订阵型和末制导探测阵型进行点集匹配来选择预定目标成为一种有效途径。但当编队目标释放干扰时,会引起阵型结构发生局部变化,导致目标选择性能恶化。本文基于反舰导弹目标选择需求,分析了传感器导航和探测误差、装订信息误差、编队目标运动和释放干扰等因素所引起的位置点集变形,通过利用阵型中未污染的结构信息,提出了基于几何散列法和结构加权平均Hausdorff距离的编队预定目标选择方法。理论分析和实验结果表明,该方法不受传感器导航误差和编队目标整体运动的影响,在编队存在冲淡干扰时能有效提高目标选择能力。     

基于Linux/QT的火控系统实时故障诊断方法

针对某数字化火控系统实时故障检测与诊断问题,提出了一种基于对象式框架知识表示的火控系统实时故障诊断方法。该方法采用专家系统与实时进程通信,获取故障征兆,进行实时推理定位故障源。给出了诊断系统的一般架构,介绍故障诊断系统知识表示的形式化描述,实时推理、规则匹配算法和UDP进程通信协议。实际应用证明了这种方法的有效性和可扩展性。     

Comparison between constant‐stress and step‐stress accelerated life tests under Time Constraint

By running life tests at higher stress levels than normal operating conditions, accelerated life testing (ALT) quickly yields information on the lifetime distribution of a test unit. The lifetime at the design stress is then estimated through extrapolation using a regression model. In constant‐stress testing, a unit is tested at a fixed stress level until failure or the termination time point of test, whereas step‐stress testing allows the experimenter to gradually increase the stress levels at some prefixed time points during the test. In this work, the optimal k‐level constant‐stress and step‐stress ALTs are compared for the exponential failure data under complete sampling and Type‐I censoring. The objective is to quantify the advantage of using the step‐stress testing relative to the constant‐stress one. Assuming a log‐linear life–stress relationship with the cumulative exposure model for the effect of changing stress in step‐stress testing, the optimal design points are determined under C/D/A‐optimality criteria. The efficiency of step‐stress testing to constant‐stress one is then discussed in terms of the ratio of optimal objective functions based on the information matrix. © 2013 Wiley Periodicals, Inc. Naval Research Logistics 00: 000–000, 2013     

航空燃料冰点快速测定方法

冰点是表征航空燃料低温使用性能的重要指标。常规冰点测定方法操作步骤复杂,测定时间长,影响航空燃料质量检测效率。基于光散射原理,将温度传感和光电检测技术应用于航空燃料冰点测定,利用燃料结晶对光散射和透射的影响,实现航空燃料冰点快速测定。该方法操作简单快速,检测1个油样用时少于15 min,大幅提高了冰点检测效率;试样体积仅需2 mL,有利于试验环境保护;测定结果重复性好,与标准方法 GB/T2430—2008具有良好的相关性。     

基于机场跑道方向特征的快速识别方法

在分析航拍和遥感机场跑道结构特征的基础上,提出了一种结合跑道方向特性的快速识别方法。具体介绍了方向小波变换检测边缘的算法和基于方向特性的改进Hough变换提取直线的方法。前者增加了检测结果的有效性和可靠性,后者加快了跑道识别速度,并能详细描述跑道。实验结果表明本算法是准确、快速、稳健的。     

Higher‐order Markov chain models for categorical data sequences*

In this paper we study higher‐order Markov chain models for analyzing categorical data sequences. We propose an efficient estimation method for the model parameters. Data sequences such as DNA and sales demand are used to illustrate the predicting power of our proposed models. In particular, we apply the developed higher‐order Markov chain model to the server logs data. The objective here is to model the users' behavior in accessing information and to predict their behavior in the future. Our tests are based on a realistic web log and our model shows an improvement in prediction. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

THE LONG‐RUN RELATIONSHIP BETWEEN DEFENCE EXPENDITURES AND GDP IN TAIWAN

Using the Solow–Swan growth model and the time‐trend included in the aggregate production function, this study applies the multivariate cointegration approach to re‐investigate the long‐run and causal relationships between defence expenditures and GDP while controlling for capital and labour input in Taiwan during the 1955–2002 period. It examines the long‐run causal relationship using the weak exogeneity test and utilizes general impulse response functions to determine whether a shock to defence expenditures affects economic growth or vice versa. Our findings provide substantive evidence in favour of the existence of a long‐run equilibrium cointegrated relationship between defence expenditures, GDP, labour and capital stock. The results of the weak exogeneity test indicate that a bi‐directional causal relationship exists in the long‐run between defence expenditures and GDP. Thus, the main policy implication that emerges from the long‐run results is that increasing defence expenditures in Taiwan is an effective means to boost overall economic performance and, with this improved economy, it should then be able to increase its defence expenditures further. Lastly, from our dynamic vector error correction model estimations, it is found that defence expenditures are a major means of adjusting for disequilibria that occur within the system.     

微机械陀螺品质因数的在线测量方法

品质因数是决定微机械陀螺结构性能的重要参数。传统测量振动结构品质因数的幅频曲线半功率带宽法需要记录大量幅频响应数据并需作离线处理,测量效率很低。通过分析微机械陀螺动力学模型发现,品质因数可根据谐振频率及相频函数在谐振频率点处的一阶导数值计算,且相频曲线在谐振频率点附近近似为线性。利用这些特点,提出一种新的品质因数在线快速测量方法。首先,在谐振频率附近对陀螺进行激励,得到相频数据;然后,使用递推最小二乘法估计出相频曲线斜率;最后根据该斜率和谐振频率值计算出品质因数。新方法不需要存储和离线分析频率响应数据,可以自动确定品质因数。仿真和实验验证了本文方法的正确性和可行性。     

Variables inspection for SPC‐quarantined production

When a control chart signals an out‐of‐control condition for a production process, it may be desirable to “quarantine” all units produced since the last in‐control SPC sample. This paper presents an efficient procedure for variables inspection of such “SPC quarantined” product. A Bayesian sequential inspection procedure is developed which determines whether the out of control production is of acceptable quality. By inspecting the units in reverse of the order in which they were produced, the procedure is also capable of detecting the point at which the process went out of control, thus eliminating the need to inspect units produced prior to the onset of the out of control condition. Numerical examples are presented, and the performance characteristics of the procedure are demonstrated using Monte Carlo simulation. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48: 159–171, 2001     

地籍数据库点线拓扑一致性并行检查方法

针对拓扑检查算法复杂、计算量大,串行计算已远不能满足海量地籍数据高效拓扑检查需求的问题,在分析了点线拓扑关系的并行特点基础上,将界址点的数据划分方法与界址线的QR空间索引方法相结合,实现了界址点与界址线的并行拓扑计算。用某地区实际的界址点集与界址线集对点线拓扑并行检查进行实验。测试结果表明:并行检查算法的并行效率随着进程数的增加而有所衰减,但稳定在30%以上,加速比达到5以上,且相比于Arc GIS效率提升了30倍以上。并行检查方法以工具的方式集成应用于高性能地理计算平台中,应用效果良好。     

巨磁阻传感器在齿轮精细检测中的应用

提出一种利用巨磁阻传感器进行齿轮精细检测的方法,介绍该方法的检测原理和系统组成,从可分辨最小磁场、时间响应和温度特性3个方面分析应用巨磁阻传感器的可行性和有效性,并通过实例测量实现对齿轮的磨损、点蚀等故障的有效检测与诊断.     

Inequality‐based reliability estimates for complex systems

Full‐system testing for large‐scale systems is often infeasible or very costly. Thus, when estimating system reliability, it is desirable to use a method that uses subsystem tests, which are often less expensive and more feasible. This article presents a method for bounding full‐system reliabilities based on subsystem tests and, if available, full‐system tests. The method does not require that subsystems be independent. It accounts for dependencies through the use of certain probability inequalities. The inequalities provide the basis for valid reliability calculations while not requiring independent subsystems or full‐system tests. The inequalities allow for test information on pairwise subsystem failure modes to be incorporated, thereby improving the bound on system reliability. We illustrate some of the properties of the estimates via an example application. © 2013 Wiley Periodicals, Inc. Naval Research Logistics, 2013     

虚拟环境下柔性线缆建模方法

研究了虚拟环境下柔性线缆建模方法，给出了离散控制点线缆简化模型和计算各离散控制点坐标值的算法。针对柔性线缆在虚拟环境中的碰撞检测问题，具体分析了从物体侧面绕过和从物体上表面经过2种碰撞检测情况，基于深度矢量和体矢量碰撞检测算法，给出了碰撞检测响应算法。     

红外图像序列运动小目标检测的预处理算法研究

就如何检测复杂背景下低信噪比的运动小目标展开讨论,提出了用空间高通滤波方法改善图像质量,达到抑制背景噪声,增强小目标的效果,随后用似然比检测理论进行目标的初步分离,接着采用邻域判决的方法实现运动目标的进一步分离,最后用图像流分析法进行目标的最终检测。实验结果表明,该算法能够对小目标甚至是点目标的运动进行可靠的检测     

人脸特征定位在油库安全监控中的应用研究

人脸特征定位是人脸检测与识别中的重点与难点,也是研究的热点;而油库安全是油库各项工作的首位,是油库建设和发展的“生命线”,通过人脸检测进行个人身份识别是消除人为不安全因素,保证油库安全的有效措施。在此背景下提出了一种基于人脸图像的对人脸特征进行定位以及提取轮廓的方法,这种方法可以提高人脸特征检测的效率。并把这种方法应用到油库安全监控中,提出了系统的原理与设计,来达到保障油库安全的目的。     

基于黏度和介电常数的柴油机机油质量监测研究

对某重型柴油机机油在使用过程中混入柴油、冷却液、烟炱等污染的情况进行模拟试验,在纯净的机油中分别混入柴油、冷却液和烟炱并搅拌均匀,配成不同百分比的模拟污染油液,利用油品传感器FPS(Fluid PropertySensor)测量模拟污染油液的黏度、介电常数和温度。试验表明:当机油中混入柴油、冷却液和烟炱时,机油的黏度或介电常数随着混入的百分比变化而变化;试验得出了它们之间的定量关系式。通过实车机油质量的检测认为:该方法可以用于机油的在线监测,为机油的按质换油提供监测方法和手段。     

基于统计势能的水平集特定目标轮廓提取方法

介绍一种基于统计势能的水平集特定目标轮廓提取方法.首先通过计算统计势能得到水平集曲线与目标边界相关程度,然后由此推导出区域决策影响因子并将其引入到水平集函数演化方程中,最终实现利用目标区域信息提高水平集目标轮廓提取质量.红外图像目标轮廓提取实验结果表明,该方法能够有效地克服目标轮廓提取中存在的边界泄漏问题.     

双离合器自动变速系统动力学建模及仿真研究

在分析双离合器自动变速器的典型结构及工作原理的基础上,利用面向对象的图形化系统仿真分析软件EASY5,建立了典型湿式双离合器动力换挡的自动变速器及其控制系统的动力学模型,并与采用传统的手动变速系统的车辆对比, 进行了加速性能的仿真分析,研究了车辆换挡过渡过程中影响换挡品质的主要因素及其改进措施。为这种新型的自动变速器在我国的推广和应用研究提供了一些基本的理论依据。