新型频率选择表面加载双极化超宽带紧耦合阵列天线

为使紧耦合阵列天线在超宽频带内实现电磁性能更佳、辐射性能更稳定的目的,提出一种新型条形频率选择表面宽角阻抗匹配层加载的双极化超宽带紧耦合阵列天线。通过高频仿真软件CST周期边界条件对阵列单元截断并进行研究分析。掌握阵元阻抗和辐射等电磁性能后,优化设计并加工出一个6×6单元的阵列天线进行实际测量。测量结果表明,该天线在2~12 GHz的频带内驻波比均小于3,驻波比带宽为10 GHz。带内辐射特性稳定,主瓣电磁能量集中,交叉极化小。工作频带内,最大增益可以达到13 dBi。该阵列天线可应用于超宽带相控阵天线领域中。     

机载航电系统射频隐身性能多域联合评估方法

针对机载航电系统自身辐射源特性,提出一种不依赖敌方探测设备的机载航电系统射频隐身性能评估方法。分析机载航电系统设备在极化域、波形域、能量域中影响射频隐身性能的因素,构建极化域、能量域、波形域射频隐身指标,打破常规的"辐射-接收"模型的隐身性能评估方法,建立基于机载航电系统自身辐射信号工作状态和工作参数的射频隐身定量评估方法。对机载雷达系统进行仿真评估,结果表明,该评估方法能正确反映机载雷达系统的射频隐身性能。     

自由电子激光的粒子模拟

文中简单介绍了自由电子激光粒子模拟方法,用■维完全相对论性电磁模程序模拟了相对论电子束通过回旋磁场产生电磁辐射的过程,并作了理论解释;研究了纵向引导磁场对能量转换效率的影响。     

Research on a MEMS pyrotechnic with a double-layer barrier safety and arming device

As an essential component of ammunition, pyrotechnics can control ignition with high reliability. However, due to limits of fabrication technology, traditional pyrotechnics are bulky. To achieve both functionality and miniaturization, MEMS pyrotechnics integrate initiator, safety-and-arming (S&A) device and lead charge and keep all components within a small size. MEMS S&A devices, as the core component to ensure system safety, are difficult to achieve active and rapid response to control signals with high safety and reliability. In order to overcome the difficulty, we propose the design and characterization of a MEMS pyrotechnic with a double-layer barrier S&A device. The MEMS pyrotechnic is a high-integrated device with an overall size of 13.4 × 8.5 × 5.2 mm³. The initiator is a NiCr bridge foil covered with an Al/CuO energetic film, which can generate flame when ignited by an excitation voltage. To match the flame energy, lead styphnate is chosen in this study as the lead charge. The S&A device contains four semi-circular barriers, which are directly driven by V-shape electro-thermal actuators to gain active control of the pyrotechnics' ignition condition with rapid response. To improve the system's reliability, the four barriers are axisymmetrically placed in two layers, two barriers for each layer, to constitute a double-layer structure with a thickness of 100 μm. The ignition test results show that the S&A device can prevent the initiator from detonating the lead charge in safety condition. In arming condition, the lead charge will be detonated.     

武器系统电磁信息泄漏与防护初探

在论述了电磁泄漏所带来的影响的基础上,初步探讨了武器系统的电磁信息泄漏机理,论述了进行电磁泄漏防护的相关方法,展望了下一步需要继续研究的相关内容。     

Development of cost effective personnel armour through structural hybridization

The objective of the present study is to develop cost effective thermoplastic hybrid laminate using Dyneema® HB50 and Tensylon®HSBD 30A through structural hybridization method. Laminates having 20 mm thickness were fabricated and subjected to 7.62 × 39 mm mild steel core projectile with an impact velocity of 730 ± 10 ms⁻¹. Parameters such as energy absorption, back face deformation and rate of back face deformation were measured as a function of hybridization ratio. It was observed that hybrid laminate with 50:50 ratio (w/w) of Tensylon® and Dyneema® with Tensylon® as front face showed 200% more energy absorption when compared to 100% Tensylon® laminate and showed equal energy absorption as that of expensive 100% Dyneema® laminate. Moreover, hybrid laminate with TD50:50 ratio showed 40% lower in terms of final back face deformation than Dyneema® laminate. Rate of back face deformation was also found to be slow for hybrid laminate as compared to Dyneema® laminate. Dynamic mechanical analysis showed that, Tensylon® laminate has got higher stiffness and lower damping factor than Dyneema® and hybrid laminates. The interface between Tensylon® and Dyneema® layers was found to be separating during the penetration process due to the poor interfacial bonding. Failure behaviour of laminates for different hybridization ratios were studied by sectioning the impacted laminates. It was observed that, the Tensylon® laminate has undergone shear cutting of fibers as major failure mode whereas the hybrid laminate showed shear cutting followed by tensile stretching, fiber pull out and delamination. These inputs are highly useful for body armour applications to design cost effective armour with enhanced performance.     

Effects of total pressures and equivalence ratios on kerosene/air rotating detonation engines using a paralleling CE/SE method

In this paper, the kerosene/air rotating detonation engines(RDE) are numerically investigated, and the emphasis is laid on the effects of total pressures and equivalence ratios on the operation characteristics of RDE including the initiation, instabilities, and propulsive performance. A hybrid MPI + OpenMP parallel computing model is applied and it is proved to be able to obtain a more effective parallel performance on high performance computing(HPC) systems. A series of cases with the total pressure of 1 MPa, 1.5 MPa, 2 MPa, and the equivalence ratio of 0.9, 1, 1.4 are simulated. On one hand, the total pressure shows a significant impact on the instabilities of rotating detonation waves. The instability phenomenon is observed in cases with low total pressure (1 MPa) and weakened with the increase of the total pressure. The total pressure has a small impact on the detonation wave velocity and the specific impulse. On the other hand, the equivalence ratio shows a negligible influence on the instabilities, while it affects the ignition process and accounts for the detonation velocity deficit. It is more difficult to initiate rotating detonation waves directly in the lean fuel operation condition. Little difference was observed in the thrust with different equivalence ratios of 0.9, 1, and 1.4. The highest specific impulse was obtained in the lean fuel cases, which is around 2700 s. The findings could provide insights into the understanding of the operation characteristics of kerosene/air RDE.     

Novel aluminum-based fuel: Facile preparation to improve thermal reactions

To improve the thermal properties of aluminum (Al) in the energetic system, a coated structure with ammonium perchlorate (AP) was prepared by a facile approach. And N, N-Dimethylformamide (DMF) was chosen as an ideal solvent based on heterogeneous nucleation theory and molecular dynamics simulation. This coated structure could enlarge the contact area and improve the reaction environment to enhance the thermal properties. The addition of AP could accelerate oxidation temperature of Al with around 17.5 °C. And the heat release of 85@15 composition rises to 26.13 kJ/g and the reaction degree is 97.6% with higher peak pressure (254.6 kPa) and rise rate (1.397 MPa/s). An ideal ratio with 15 wt% AP was probed primarily. The high energy laser-induced shockwave experiment was utilized to simulate the reaction behavior in hot field. And the larger activated mixture of coated powder could release more energy to promote the growth of shockwave with higher speed up to 518.7 ± 55.9 m/s. In conclusion, 85@15 composition is expected to be applied in energetic system as a novel metal fuel.     

Scheduling policies for an antiterrorist surveillance system

This article concerns scheduling policies in a surveillance system aimed at detecting a terrorist attack in time. Terrorist suspects arriving at a public area are subject to continuous monitoring, while a surveillance team takes their biometric signatures and compares them with records stored in a terrorist database. Because the surveillance team can screen only one terrorist suspect at a time, the team faces a dynamic scheduling problem among the suspects. We build a model consisting of an M/G/1 queue with two types of customers—red and white—to study this problem. Both types of customers are impatient but the reneging time distributions are different. The server only receives a reward by serving a red customer and can use the time a customer has spent in the queue to deduce its likely type. In a few special cases, a simple service rule—such as first‐come‐first‐serve—is optimal. We explain why the problem is in general difficult and we develop a heuristic policy motivated by the fact that terrorist attacks tend to be rare events. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

人工磁导体在超近反导系统中的应用

针对坦克超近程主动防护雷达系统中的收发天线隔离问题,分析了由周期结构光子晶体高阻表面形成的人工磁导体(AMC)的等效模型,给出了其反射系数与相移的关系.由于其对电磁波表现出来的吸收和产生相移的特点,提出一种利用光子晶体高祖表面代替传统隔条来提高天线隔离度的新方法.实验结果证明,该方法能使得收发天线在200MHz的带宽达到- 80dB以下的隔离度,满足系统要求,并且结构简单、成本低,具有很大的应用价值.     

Reliability of a 2‐dimensional k‐within‐consecutive‐r × s‐out‐of‐m × n:F system

A 2‐dimensional rectangular (cylindrical) k‐within‐consecutive‐r × s‐out‐of‐m × n:F system is the rectangular (cylindrical) m × n‐system if the system fails whenever k components in a r × s‐submatrix fail. This paper proposes a recursive algorithm for the reliability of the 2‐dimensional k‐within‐consecutive‐r × s‐out‐m × n:F system, in the rectangular case and the cylindrical case. This algorithm requires min ( O (mk^r(n?s)), O (nk^s(m?r))), and O (mk^rn) computing time in the rectangular case and the cylindrical case, respectively. The proposed algorithm will be demonstrated and some numerical examples will be shown. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48: 625–637, 2001.     

电磁轨道发射中内弹道动力响应特性分析

将轨道简化为移动载荷作用下固定在弹性支撑上的Bernoulli-Euler梁，通过静态电磁-结构耦合有限元模型求得外围封装的等效刚度，计算得到发射器的临界速度。另外，利用混合有限元/边界元法建立电磁-结构-运动多物理场耦合的动力学模型，求得枢轨动态接触压力和轨道的应力应变分布特性。通过在轨道背面布置光纤光栅应变传感器，利用测量数据验证了动力响应特性，并分析了弹丸在内弹道的稳定性。针对典型30 mm × 30 mm矩形口径发射器，分析及试验结果表明：C型电枢对轨道的电磁挤压力在平顶沿起始时刻达到最大值，之后随着时间推移逐渐减小；电枢通过引起的应力波在高速段容易与轨道中反射应力波发生共振，并且轨道在电枢运动的中间高速段区域受力最为集中，应力集中水平约是起始低速段区域的2.44倍；电枢运动高速段会出现晃动现象，进而引起上下轨道受力的不对称性。分析及试验结果对研究电磁轨道发射器内弹道动力响应特性和发射器结构设计具有重要指导意义。     

Study of simple plane wave generator with an air-metal barrier

Plane wave generators (PWGs) are used to accelerate flyer plates to high velocities with their generated plane waves, which are widely used in the test of dynamic properties of materials. The traditional PWG is composed of two explosives with different detonation velocities. It is difficult to implement the related fabrication processes and control the generated waves due to its complicated structures. A simple plane wave generator is presented in this paper, which is composed of two identical cylindrical high explosive (HE) charges and an air-metal barrier. A theoretical model was established based on two different paths of the propagation of detonation waves, based on which the size of air-metal barrier was calculated for a given charge. The corresponding numerical simulations were also carried out by AUTODYN-2D^® based on the calculated results, which were used to compare with the theoretical calculations. A detonation wave with a flatness of 0.039 μs within the range of 70-percent diameter of the main charge was obtained through the simulations.     

Formation and characterization of core-shell CL-20/TNT composite prepared by spray-drying technique

The core-shell 2,4,6,8,10,12-Hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane/2,4,6-Trinitrotoluene (CL-20/TNT) composite was prepared by spray-drying method in which sensitive high energy explosive (CL-20) was coated with insensitive explosive (TNT). The structure and properties of different formulations of CL-20/TNT composite and CL-20/TNT mixture were characterized by scanning electron microscopy (SEM), Transmission electron microscopy (TEM), Laser particle size analyzer, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), differential scanning calorimetry (DSC), impact sensitivity test and detonation performance. The results of SEM, TEM, XPS and XRD show that ϵ-CL-20 particles are coated by TNT. When the ratio of CL-20/TNT is 75/25, core-shell structure is well formed, and thickness of the shell is about 20–30 nm. And the analysis of heat and impact show that with the increase of TNT content, the TNT coating on the core-shell composite material can not only catalyze the thermal decomposition of core material (CL-20), but also greatly reduce the impact sensitivity. Compared with the CL-20/TNT mixture (75/25) at the same ratio, the characteristic drop height of core-shell CL-20/TNT composite (75/25) increased by 47.6% and the TNT coating can accelerate the nuclear decomposition in the CL-20/TNT composites. Therefore, the preparation of the core-shell composites can be regarded as a unique means, by which the composites are characterized by controllable decomposition rate, high energy and excellent mechanical sensitivity and could be applied to propellants and other fields.     

超宽带电磁脉冲对无线电引信辐照效应研究

为了研究无线电引信在强电磁环境下的安全性和可靠性,利用频带很宽的超宽带电磁脉冲（UWB）源对某型无线电引信系统进行了辐照实验。对不同姿态的无线电引信系统的UWB辐照试验表明,当无线电引信系统的轴线方向与超宽带辐射场极化方向一致时,电磁能量耦合最强,最易于受到超宽带电磁辐射场的干扰;在无线电引信系统不加电情况下,UWB辐照基本不会使无线电引信起爆,也不会对其产生明显影响;但是较强的UWB辐射场会使处于加电工作状态下无线电引信意外起爆,但经过辐照后整个无线电引信系统内在性能参数不会产生明显变化。     

Theoretical and numerical simulation study on jet formation and penetration of different liner structures driven by electromagnetic pressure

The use of a shaped liner driven by electromagnetic force is a new means of forming jets. To study the mechanism of jet formation driven by electromagnetic force, we considered the current skin effect and the characteristics of electromagnetic loading and established a coupling model of"Electric—Magnetic—Force"and the theoretical model of jet formation under electromagnetic force. The jet formation and penetration of conical and trumpet liners have been calculated. Then, a numerical simulation of liner collapse under electromagnetic force, jet generation, and the stretching motion were performed using an ANSYS multiphysics processor. The calculated jet velocity, jet shape, and depth of penetration were consistent with the experimental results, with a relative error of less than 10％. In addition, we calculated the jet formation of different curvature trumpet liners driven by the same loading condition and ob-tained the influence rule of the curvature of the liner on jet formation. Results show that the theoretical model and the ANSYS multiphysics numerical method can effectively calculate the jet formation of liners driven by electromagnetic force, and in a certain range, the greater the curvature of the liner is, the greater the jet velocity is.     

Relative performance of novel blast wave mitigation system to conventional system based on mitigation percent criteria

Recent researches focused on developing robust blast load mitigation systems due to the threats of terrorist attacks. One of the main embraced strategies is the structural systems that use mitigation techniques. They are developed from a combination of structural elements and described herein as conventional systems. Among the promising techniques is that redirect the waves propagation through hollow tubes. The blast wave propagation through tubes provides an efficient system since it combines many blast wave phenomena, such as reflection, diffraction, and interaction. In this research, a novel blast load mitigation system, employed as a protection fence, is developed using a technique similar to the technique of the bent tube in manipulating the shock-wave. The relative performance of the novel system to the conventional system is evaluated based on mitigation percent criteria. Performances of both systems are calculated through numerical simulation. The proposed novel system proved to satisfy high performance in mitigating the generated blast waves from charges weight up to 500 kg TNT at relatively small standoff distances (5 m and 8 m). It mitigates at least 94％ of the blast waves, which means that only 6％ of that blast impulse is considered as the applied load on the targeted structure.     

Mathematical aspects of the 3 × n job-shop sequencing problem

The paper discusses mathematical properties of the well-known Bellman-Johnson 3 × n sequencing problem. Optimal rules for some special cases are developed. For the case min B_i ≥ maxA_j we find an optimal sequence of the 2 × n problem for machines B and C and move one item to the front of the sequence to minimize (7); when min B_i ≥ max C_j we solve a 2 × n problem for machines A and B and move one item to the end of the optimal sequence so as to minimize (9). There is also given a sufficient optimality condition for a solution obtained by Johnson's approximate method. This explains why this method so often produces an optimal solution.     

Background dominant colors extraction method based on color image quick fuzzy c-means clustering algorithm

A quick and accurate extraction of dominant colors of background images is the basis of adaptive camouflage design. This paper proposes a Color Image Quick Fuzzy C-Means (CIQFCM) clustering algorithm based on clustering spatial mapping. First, the clustering sample space was mapped from the image pixels to the quantized color space, and several methods were adopted to compress the amount of clustering samples. Then, an improved pedigree clustering algorithm was applied to obtain the initial class centers. Finally, CIQFCM clustering algorithm was used for quick extraction of dominant colors of background image. After theoretical analysis of the effect and efficiency of the CIQFCM algorithm, several experiments were carried out to discuss the selection of proper quantization intervals and to verify the effect and efficiency of the CIQFCM algorithm. The results indicated that the value of quantization intervals should be set to 4, and the proposed algorithm could improve the clustering efficiency while maintaining the clustering effect. In addition, as the image size increased from 128 × 128 to 1024 × 1024, the efficiency improvement of CIQFCM algorithm was increased from 6.44 times to 36.42 times, which demonstrated the significant advantage of CIQFCM algorithm in dominant colors extraction of large-size images.     

Waiting time analysis for a queueing system with time‐limited service and exponential timer

We consider a single‐queue with exhaustive or gated time‐limited services and server vacations, in which the length of each service period at the queue is controlled by a timer, i.e., the server serves customers until the timer expires or the queue becomes empty, whichever occurs first, and then takes vacations. The customer whose service is interrupted due to the timer expiration may be attended according to nonpreemptive or preemptive service disciplines. For the M/G/1 exhaustive/gated time‐limited service queueing system with an exponential timer and four typical preemptive/nonpreemptive service disciplines, we derive the Laplace—Stieltjes transforms and the moment formulas for waiting times and sojourn times through a unified approach, and provide some new results for these time‐limited service disciplines. © John Wiley & Sons, Inc. Naval Research Logistics 48: 638–651, 2001.