Research on design and firing performance of Si-based detonator

For the chip integration of MEMS (micro-electromechanical system) safety and arming device, a miniature detonator needs to be developed to reduce the weight and volume of explosive train. A Si-based micro-detonator is designed and fabricated, which meets the requirement of MEMS safety and arming device. The firing sensitivity of micro-detonator is tested according to GJB/z377A-94 sensitivity test methods: Langlie. The function time of micro-detonator is measured using wire probe and photoelectric transducer. The result shows the average firing voltage is 6.4 V when the discharge capacitance of firing electro-circuit is 33 μF. And the average function time is 5.48 μs. The firing energy actually utilized by Si-based micro-detonator is explored.     

空气/煤油/水燃气发生器点火特性试验研究

燃气发生器是超燃冲压发动机地面试验系统中的关键设备,为提高系统安全性和经济性设计了空气/煤油/水燃气发生器,在富燃状态下进行了一系列点火试验,试验结果表明：该型燃气发生器,实现可靠点火的余氧系数下限为0.51;水的加入使得化学反应速率和火焰传播速度降低,燃气发生器点火和火焰稳定困难,提高余氧系数可以提高点火可靠性。同时水的加入容易引起燃烧不稳定,通过提高余氧系数可消除低频不稳定燃烧。     

空气/煤油/水燃气发生器点火特性试验

燃气发生器是超燃冲压发动机地面试验系统中的关键设备,为提高系统安全性和经济性设计了空气/煤油/水燃气发生器,在富燃状态下进行了一系列点火试验,试验结果表明:该型燃气发生器,实现可靠点火的余氧系数下限为0.51;水的加入使得化学反应速率和火焰传播速度降低,燃气发生器点火和火焰稳定困难,提高余氧系数可以提高点火可靠性。同时,水的加入容易引起燃烧不稳定,通过提高余氧系数来消除低频不稳定燃烧。     

A study of flames with millimeter-wave radiation

It is a valuable issue to explore whether a flame can radiate microwaves, in spite of the electric field formed in the flame. Presented herein is an experimental study on a series of flames with millimeter-wave radiation in the combustion of pyrotechnic films. The pyrotechnic films were composed of ultra-fine red phosphorus (P), sodium nitrate (NaNO₃), Polyvinyl Alcohol (PVA) and some additives such as chopped carbon fibers (CFs) and aluminized glass fibers (GFs). The combustion temperatures and millimeter-wave radiation signals of the flames were measured, the millimeter-wave emissivity and spectral radiant exitance were calculated to describe the millimeter-wave radiation intensity. The results demonstrate that the flame of the pyrotechnic films based on P/NaNO₃/CFs can radiate millimeter waves, and different materials and their proportion have a great effect on the millimeter-wave radiation intensity.     

The surface activation of boron to improve ignition and combustion characteristic

Boron is a very promising and highly attractive fuel because of high calorific value. However, the practical applications in explosives and propellants of boron have been limited by long ignition delay time and low combustion efficiency. Herein, nano-Al and graphene fluoride (GF) as surface activated materials are employed to coat boron (B) particles to improve ignition and combustion performance. The reaction heat of nano-Al coated B/KNO₃ and GF coated B/KNO₃ are 1116.83 J/g and 862.69 J/g, respectively, which are higher than that of pure B/KNO₃ (823.39 J/g). The ignition delay time of B/KNO₃ could be reduced through nano-Al coating. The shortest ignition delay time is only 75 ms for B coated with nano-Al of 8 wt%, which is much shorter than that of pure B/KNO₃ (109 ms). However, the ignition delay time of B/KNO₃ coated with GF has been increased from 109 to 187 ms. B coated with GF and nano-Al shown significantly influence on the pressure output and flame structure of B/KNO₃. Furthermore, the effects of B/O ratios on the pressure output and ignition delay time have been further fully studied. For B/KNO₃ coated with nano-Al and GF, the highest pressures are 88 KPa and 59 KPa for B/O ratio of 4:6, and the minimum ignition delay time are 94 ms and 148 ms for B/O ratio of 7:3. Based on the above results, the reaction process of boron coated with GF and nano-Al has been proposed to understand combustion mechanism.     

Microcrack- and microvoid-related impact damage and ignition responses for HMX-based polymer-bonded explosives at high temperature

Investigating the damage and ignition behaviors of polymer-bonded explosive (PBX) under a coupled impact and high-temperature loading condition is required for the safe use of charged PBXs. An improved combined microcrack and microvoid model (CMM) was developed for better describing the thermal effects of deformation, damage, and ignition responses of PBXs. The main features of the model under typical dynamic loadings (i.e. uniaxial tension and compression, and lateral confinement) at different initial temperature were first studied. And then the effects of temperature on impact-shear sensitivity of HMX-based PBXs were investigated. The results showed that the ignition threshold velocity of shear-crack hotspots exhibits an increase from 260 to 270 to 315–325 m/s when initial temperature increases from 301 to 348 K; and then the threshold velocity decreases to 290–300 m/s with the initial temperature continually increasing to 378 K. The predicted ignition threshold velocity level of the explosives under coupled impact and high temperature loading conditions were consistent with the experimental data.     

典型线性火工分离装置作用过程数值模拟及试验研究

针对目前线性火工分离装置的优化设计主要依靠试验验证,成本高且设计优化迭代慢的问题,采用任意拉格朗日-欧拉方法建立典型线性火工分离装置的数值模型。通过火工分离试验和光子多普勒测速试验对上述数值模型进行验证,发现该数值模型具有较好的精度。使用该模型研究上述火工分离装置分离瞬态过程的力学机理,并定量分析多种因素对分离装置重点部位等效塑性应变等关键特征量的影响。研究发现,芯药线密度、分离板削弱槽底部的圆角半径对分离装置的作用过程有重大影响。此外,保护罩材质、削弱槽开口角度、分离板槽结构尺寸等因素对分离过程也有一定影响,但其影响相对较小。研究结果可以为典型线性火工分离装置的优化设计提供基础。     

Numerical and experimental study on the response characteristics of warhead in the fast cook-off process

The response characteristics of the warhead under thermal stimuli conditions are important to the safety improvement. The goal of this study is to obtain data on the warhead in the fast cook-off process. In this paper, a numerical calculation method is proposed, whose reliability is supported by comparison with experimental results. Through the numerical calculation, the temperature distribution, temperature change, and ignition time are acquired. The numerical results show that the ignition time is 76 s after the warhead started to burn and that the maximum temperature of the explosive's outer surface is 238.3 C at the ignition time. The fast cook-off experiment of the warhead is implemented so as to get the flame temperature and reaction grades that are not available through numerical calculation. The experimental results show that the overpressure fails to reach the preset minimum value which is equivalent to 6 kg of TNT and that the reaction grade is deflagration. The research results have reference value for the design of the warhead and the reduction of detonation risks.     

Burning characteristics of high density foamed GAP/CL-20 propellants

The monolithic foamed propellants with high densities were prepared by casting and two-step foaming processes. Glycidyl azide polymer (GAP) and isocyanate were used as the binder system and 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (HNIW, CL-20) was employed as the energetic component. The newly designed formulation containing 60 % CL-20 produced a force constant of 1077 J/g and low flame temperature of 2817 K. Two foamed propellants with densities of 1.32 g/cm³ and 1.53 g/cm³ were fabricated by a confined foaming process and examined by closed bomb tests. The results revealed that porosity significantly affects burning performance. A size effect on combustion behaviors was observed for the foamed propellant with 5.56 % porosity, and a double-hump progressive dynamic vivacity curve was obtained. At last, the 30 mm gun test was carried out to demonstrate the interior ballistic performance, and the muzzle velocity increased by 120 m/s at the same maximum chamber pressure when monolithic propellant was added in the charge.     

Effects of total pressures and equivalence ratios on kerosene/air rotating detonation engines using a paralleling CE/SE method

In this paper, the kerosene/air rotating detonation engines(RDE) are numerically investigated, and the emphasis is laid on the effects of total pressures and equivalence ratios on the operation characteristics of RDE including the initiation, instabilities, and propulsive performance. A hybrid MPI + OpenMP parallel computing model is applied and it is proved to be able to obtain a more effective parallel performance on high performance computing(HPC) systems. A series of cases with the total pressure of 1 MPa, 1.5 MPa, 2 MPa, and the equivalence ratio of 0.9, 1, 1.4 are simulated. On one hand, the total pressure shows a significant impact on the instabilities of rotating detonation waves. The instability phenomenon is observed in cases with low total pressure (1 MPa) and weakened with the increase of the total pressure. The total pressure has a small impact on the detonation wave velocity and the specific impulse. On the other hand, the equivalence ratio shows a negligible influence on the instabilities, while it affects the ignition process and accounts for the detonation velocity deficit. It is more difficult to initiate rotating detonation waves directly in the lean fuel operation condition. Little difference was observed in the thrust with different equivalence ratios of 0.9, 1, and 1.4. The highest specific impulse was obtained in the lean fuel cases, which is around 2700 s. The findings could provide insights into the understanding of the operation characteristics of kerosene/air RDE.     

喷注方式对双模态冲压发动机燃烧稳定性的影响

在模拟飞行马赫数Ma=4的直连式试验设备基础上,采用固定几何双模态冲压发动机燃烧室构型,使用液体煤油作为燃料,并用火炬式点火器点火,研究不同喷注方式下的火焰稳定性。试验研究表明:在加热器来流总温、总压较低的条件下,火焰稳定较难实现;煤油喷注方式对双模态冲压发动机燃烧室内燃烧稳定性影响很大。     

金属类MEMS器件可靠性试验技术研究

针对金属类MEMS机构可靠性水平较低且没有标准化的可靠性试验方法的现状,提出将强化试验方法引入金属类MEMS机构的可靠性研究中．确定强化试验的内容为温度循环、随机振动和冲击试验,并分别设计试验剖面．选取MEMS惯性开关作为典型器件开展试验研究,试验结果表明,所设计的可靠性试验能够有效激发MEMS机构的潜在缺陷,温度应力易引起MEMS器件层间产生疲劳效应,而振动和冲击应力则易引发器件结构性损坏;环境应力对MEMS机构具有疲劳累积效应,经历较多试验类型的样本较经历较少试验类型的样本更容易失效;惯性开关的主要失效模式是分层和变形,这2种失效模式在金属类MEMS机构中具有代表性．     

Research on fuze microswitch based on corona discharge effect

Abnormal voltages such as electrostatic, constant current, and strong electromagnetic signals can erro-neously trigger operation of MEMS pyrotechnics and control systems in a fuze, which may result in casualties. This study designs a solid-state micro-scale switch by combining the corona gas discharge theory of asymmetric electric fields and Peek's Law. The MEMS switch can be transferred from "off" to"on" through the gas breakdown between the corona electrodes. In the model, one of the two electrodes is spherical and the other flat, so a non-uniform electric field is formed around the electrodes. The theoretical work is as follows. First, the relation among the radius of curvature of the spherical electrode, the discharge gap, and the air breakdown voltage is obtained; to meet the low voltage (30-60 V) required to drive the MEMS switch, the radius of curvature of the spherical electrode needs to be 10-50 μm and the discharge gap between the two electrodes needs to be 9-11 μm. Second, the optimal ratio ε is introduced to parameterize the model. Finally, the corona discharge structural parameters are determined by comparing the theoretical and electric field simulation results. The switch is then fabricated via MEMS processing. A hardware test platform is built and the performing chip tested. It is found that when the electrode gap is 9 μm, the electrostatic voltage is at least 37.3 V, with an error of 2.6% between the actual and theoretical air breakdown voltages. When the electrode gap is 11 μm, the electrostatic voltage is at least 42.3 V, with an error of 10.5% between the actual and theoretical air breakdown voltages. Both cases meet the design requirements.     

Models of scientific and technological review for the Biological and Toxin Weapons Convention

ABSTRACT

Science and technology (S&T) review is key to anticipating developments in the life sciences that may benefit or run contrary to the aims of the 1972 Biological and Toxin Weapons Convention. It serves as a mechanism for both preparing against novel biological threats and identifying the best opportunities for developing and sharing the life sciences to the fullest extent. In the age of rapidly advancing biotechnology, S&T review needs to be wide ranging, involve a diverse set of inputs, and be transparent about its methods and data. This viewpoint considers four models of S&T review and their capacity to respond to the challenge of the life sciences: standing advisory boards; ad hoc working groups; peer review; and wikis. It then identifies a hybrid model that is suitably broad, diverse, and transparent.     

Combustion of B4C/KNO3 binary pyrotechnic system

Presented herein is an experimental study on the combustion of B4C/KNO3 binary pyrotechnic system.Combustion products were tested using X-ray diffraction(XRD),scanning electron microscopy(SEM),and energy dispersive spectrometer(EDS).According to the results of tests and CEA calculation,the combustion reaction equation was established.The flames and burning rates were recorded by a high speed camera and a spectrophotometer.The effect of B4C particle size on the thermal sensitivity of B4C/KNO3 was investigated by differential scanning calorimetry(DSC)techniques.In addition,a reliable method for calculating the flame temperature was proposed.Based on the results of experiments,the combustion reaction mechanism was briefly analyzed.The burning rate,flame temperature and thermal sensitivity of B4C/KNC3 increase with the decrease of B4C particle size.The mass ratio of B4C/KNO3 has a great effect on combustion properties.Oxidizer-rich compositions have low flame temperatures,low burning rates,and provide green light emission.The combustion reactions of fuel-rich compositions are vigorous,and the B4C/KNO3 with mass ratio of 25:75 has the highest burning rate and the highest flame temperature.     

Investigate the effects of magnetic fields on the penetration ability of a shaped charge jet at different standoffs

The influence of a magnetic field on the stability of a shaped charge jet is experimentally investigated at standoffs of 490, 650 and 800 mm. The experimental results without and with the magnetic field are compared in terms of the shaped charge jet form, stability and penetration ability. A theoretical model based on one-dimension fluid dynamics is then developed to assess the depth of penetration of the shaped charge at those three standoffs and magnetic conditions. The results show that the penetration capability can be enhanced in more than 70% by the magnetic field. The theoretical calculations are compared with the experimental results with reasonably good correlation. In addition, the parameters introduced in the theory are discussed together with the experiments at three standoffs studied.     

Numerical investigation on cooling performance of filter in a pyrotechnic gas generator

As a key part of the pyrotechnic gas generator,the filter not only removes the particulate matter but also cools the hot gas to a safe level.This paper aims to improve the understanding of the basic heat and flow phenomenon in the gas generator.The pyrotechnic gas generator is modelling by a simplified filter structure with fiber arrays.A finite-volume model of the heat and fluid flow is proposed to simulate the detailed multi-dimensional flow and energy conversion behaviors.Several verification results are in good agreement with data in different references.Simulation results demonstrate that the filter can not only absorb heat from the gas but also cause the high intensity enhancement of the heat transfer.The per-formance difference between inline and staggered arrays is also discussed.The findings of the study put a further prediction tool for the understanding and design of the filter system with fibers.     

Experimental investigation of a cook-off temperature in a hot barrel

The experimental investigations of the effect of contact time/temperature on initiating the cook-off using 7.62 mm calibre cartridge cases (CC) were conducted previously. These cartridges were filled with commercial off-the-shelf (COTS) double based (DB) propellant (Bulls Eye) and were loaded in a hot chamber. The thermal explosion temperature is of great significance to both weapon designers and safety inspectors as it provides the operational limit and safe operating temperature. For CC under test, it was found that the cook-off temperatures of this propellant were encountered with the heat transfer profile of the simulated gun barrel between 151.4 °C and 153.4 °C, with a reaction occurring in less than 300 s after the round was chambered. Usefully, each experiment was found to be consistent and repeatable.     

某型车载导弹发射制导装置现场快速检测方法

某型装甲车载反坦克导弹系统的发射制导装置，集光、机、电多种技术于一体，技术状态易受装载、运输等因素的影响。在导弹射击前，一般应在现场对发射制导装置进行快速检测以确定其技术状态。为了解决现场快速检测问题，分析了该型导弹系统发射制导装置的结构和技术特点，确定了现场快速检测的内容：用点光源的电视图像检测两个光轴不平度；用电压比较法检测点火电压和点火程序正确性；用指令频率变化检测控制指令正确性。开发了适于现场快速检测的装置，为部队射击保障提供了一种决策支持方法。     

Cell-type continuous electromagnetic radiation system generating millimeter waves for active denial system applications

The cell-type continuous electromagnetic radiation system is a demonstration device capable of generating high-power millimeter electromagnetic waves of a specific wavelength and observing their effects on living organisms. It irradiates a biological sample placed in a 30 × 30 × 50 cm³ cell with electromagnetic waves in the 3.15-mm-wavelength region (with an output of ≥1 W) and analyzes the temperature change of the sample. A vacuum electronic device-based coupled-cavity backward-wave oscillator converts the electron energy of the electron beam into radiofrequency (RF) energy and radiates it to the target through an antenna, increasing the temperature through the absorption of RF energy in the skin. The system causes pain and ultimately reduces combat power. A cell-type continuous electromagnetic radiation system consisting of four parts—an electromagnetic-wave generator, a high-voltage power supply, a test cell, and a system controller—generates an RF signal of ≥1 W in a continuous waveform at a 95-GHz center frequency, as well as a chemical solution with a dielectric constant similar to that of the skin of a living organism. An increase of 5 °C lasting approximately 10 s was confirmed through an experiment.