基于方位变化率的目标运动分析

目标方位变化率对运动要素解算有着重要的影响.但不同目标运动要素(目标距离、航向或速度)的求解精度,对目标的方位变化率又有着不同的要求.从确定性算法入手,进行了方位变化率对目标运动要素解算精度影响的理论分析,并通过仿真计算验证了理论分析的正确性,证明了该理论具有一定的应用价值.     

基于杂草算法的超磁致伸缩作动器耦合模型识别

考虑磁滞损耗、动态应力等因素的超磁致伸缩作动器磁滞模型可有效揭示电-磁-机-热多场耦合效应,但准确识别其非线性模型往往存在较大困难。智能杂草算法具有激烈的竞争机制和较强的搜索能力,可用于解决作动器多目标物理参数辨识问题。传统算法的种子数量以线性方式产生且分布方差与适应度缺乏联系,极大地影响了算法收敛速度和模型识别精度。为此,提出一种非线性繁殖和分布的混合改进杂草算法,并将其应用于超磁致伸缩作动器模型识别。实验表明:改进算法具有较强的噪声抑制能力,能精确辨识含有噪声扰动的作动器磁滞非线性模型物理参数;模型预测值和实验数据误差较小,所识别参数可使磁滞非线性模型较为全面地描述作动器多场耦合机理和动态特性。     

回归分析在漏磁定量检测中的应用

通过分析漏磁场,选取法向分量的峰峰值和峰峰值间距作为漏磁通信号的特征量。重点介绍了多元回归分析模型理论、参数估计方法和回归模型的假设检验,得到缺陷宽度、深度与峰峰值和峰峰值间距之间的回归模型,最后利用漏磁数据对回归模型进行了检验,结果表明预测缺陷宽度和深度的误差不超过10%,利用回归分析能够实现漏磁检测的定量化。     

Interval uncertain optimization for damping fluctuation of asegmented electromagnetic buffer under intensive impact load

Aiming at the problems of demagnetization effect of electromagnetic buffer (EMB) caused by high ve-locity under intensive impact load and the difficulty and error of machining composite thin-walled long tube, a segmented EMB is proposed. The inner tube and air-gap are divided into initial segments and the traversing segments. Through theoretical analysis, impact test and simulation, it can be found that the RRF curve has two peaks. Firstly, in order to reduce the resultant resistance force (RRF) peaks, the sensitivity analysis based on optimal Latin hypercube design (OLHD) and polynomial regression was performed. The results show that the smallest contribution ratio to the dynamic response is the seventh and ninth segments of the inner tube, which are less than 1％. Then, fully considering the uncertain factors, important parameters are selected for uncertain optimization after sensitivity analysis. The in-terval order and interval probability degree methods are used to establish interval uncertain optimiza-tion model of the RRF considering robustness. The model was solved using an interval nested optimization method based on radial basis function (RBF) neural network. Finally, the Pareto front is obtained and numerical simulation is performed to verify the optimal value. It indicates that the two kinds of RRF peak is obviously reduced, and the optimization object and strategy are effective.     

舵机负载模拟器惯量失配加载补偿方法

针对舵机负载力矩模拟器输出等效惯量大于被加载舵机舵面惯量的舵机加载试验情况,研究了其力矩加载补偿方法,分析了其力矩加载误差,提出了针对不同误差源的提高仿真精度的技术途径。分析结果表明,此力矩加载补偿方法现实可行,提高了试验资源的利用率,具有较好的经济效益和现实意义。     

多芯片焊球阵列封装体受热载荷作用数值模拟

针对典型高密度多芯片BGA(焊球阵列)封装体建立三维有限元分析模型,研究不同尺寸封装体在稳态热载荷作用下的结构变形和应力情况,在此基础上引入包含等效梁和危险焊球真实几何形状和间距等在内的简化模型以进行序列分析,研究各设计参数对力学参量的影响。数值结果反映了封装体应力分布及其变化特点,表明影响封装体变形和应力的主要参数;提出的建模方法简便有效,可以方便地用来分析不同类型的BGA封装,并扩展应用至不同的分析目的,为此种结构的设计和优化提供一定参考。     

Adaptive fault-tolerant control based on boundary estimation for space robot under joint actuator faults and uncertain parameters

Since the joint actuator of the space robot executes the control instructions frequently in the harsh space environment, it is prone to the partial loss of control effectiveness (PLCE) fault. An adaptive fault-tolerant control algorithm is designed for a space robot system with the uncertain parameters and the PLCE actuator faults. The mathematical model of the system is established based on the Lagrange method, and the PLCE actuator fault is described as an effectiveness factor. The lower bound of the effectiveness factors and the upper bound of the uncertain parameters are estimated by an adaptive strategy, and the estimated value is fed back to the control algorithm. Compared with the traditional fault-tolerant algorithms, the proposed algorithm does not need to predetermine the lower bound of the effectiveness factor, hence it is more in line with the actual engineering application. It is proved that the algorithm can guarantee the stability of the closed-loop system based on the Lyapunov function method. The numerical simulation results show that the proposed algorithm can not only compensate for the uncertain parameters, but also can tolerate the PLCE actuator faults effectively, which verifies the effectiveness and superiority of the control scheme.     

应用Isight的复合材料桁架结构优化设计

轻质复合材料及其结构以其优异的力学性能在航天航空飞行器上得到了广泛应用。考察玻璃纤维/环氧复合材料方形截面桁架在典型弯曲载荷工况条件下的非线性结构承载性能。采用Isight集成平台对桁架结构进行多参数优化设计,获得满足结构刚度和承载性能要求的最轻质桁架结构的几何参数,并分析最优化结构在载荷作用下的结构非线性响应行为。结果表明采用Isight平台对桁架结构进行多参数优化设计具有较高的效率和可信度。     

超燃冲压发动机二维进气道多级多目标优化设计方法

提出了超燃冲压发动机二维进气道的多级多目标设计方法。选择总压恢复系数、压升比和阻力系数为性能目标,引入多级设计概念,分别基于一维气动力学分析方法和计算流体力学方法,采用混合遗传算法对4楔角外压和2楔角内压混合压缩进气道进行了多级多目标优化设计,得到了问题的Pareto非劣解集。采用上述方法可以提升超燃冲压发动机进气道的设计水平,得到高性能的设计方案。     

作动器最优配置的柔性结构振动主动控制

柔性结构广泛应用于航空航天等领域,为了获得结构的最佳动力学性能,在主动振动控制中作动器或传感器位置优化成为关键。基于结构有限元动力学方程,在状态空间利用系统可控和可观Gramian矩阵考虑结构剩余模态的影响,推导一种新的作动器/传感器优化准则。根据优化准则结合非线性整数规划遗传算法对作动器的位置进行配置。以悬臂板为研究对象,采用基于状态反馈的线性二次型调节器研究悬臂板的振动控制效果。与其他配置方法进行比较,验证了新方法的优越性。     

漏磁信号特征提取及检测研究

介绍了漏磁检测原理和用有限元法计算漏磁场的方法,漏磁场法向分量的峰-峰值随缺陷深度增加而增加,峰-峰值间隔随缺陷宽度增大而增大。在检测中,先去除漏磁信号的奇异值,然后用峰-峰值算法提取缺陷信号特征,根据信号的峰-峰值大小和信号梯度变化作为缺陷判别标准。     

杠杆式抽筒子的动态特性研究及拓扑优化设计

针对杠杆式抽筒子工作时出现的断裂失效问题,以动力学和有限元理论为基础,分别进行抽筒子的动态特性研究和拓扑优化设计。得出其在抽筒过程中的动应力分布和危险区域,定性地确定出介质力学参数和工作参数的影响,获得了抽筒子的最佳材料布局和优化改进结构。优化前后抽筒子结构的对比仿真结果表明,改进结构能够使得应力集中危险区域仅为最大动应力降低10.6%的强撞击位置,其余部分均可转换为安全区域且结构刚度提升49%左右。所用方法有效可靠,为解决杠杆式抽筒子的断裂问题提供理论依据和技术手段。     

自适应人工蜂群优化的混沌系统参数估计

为了对混沌系统未知参数进行准确估计,改进了人工蜂群优化算法,提出自适应人工蜂群算法的混沌系统参数估计方法。将混沌系统参数估计问题转化为多维变量数值优化问题,利用人工蜂群算法对未知参数进行导向随机搜索。在搜索过程中,通过种群优化程度和解的质量自适应地调整更新步长和解的尝试次数。以Lorenz混沌系统为例进行的仿真实验表明,该方法在无噪声和噪声强度较大的情况下均能够获得较好的估计结果,表现出较强的鲁棒性。     

基于不确定性的末制导初始参数优化设计方法

为量化无动力滑翔飞行器末制导初始参数不确定性的综合影响,提升飞行器落点精度,提出基于不确定性的末制导初始参数优化设计方法。面向飞行器末端高动态打击需求,采用落角约束下的滑模变结构导引律进行实时弹道成型,进而考虑末制导初始参数的不确定性。以落点有效毁伤半径概率和落点圆概率偏差为多优化目标,建立基于不确定性的末制导初始参数及制导律参数优化模型。针对这一不确定性优化模型,研究利用高效全局优化和蒙特卡洛方法,给出末制导初始参数及制导律参数的最优设计方案。仿真结果表明:该方法能显著提升落点精度,为方案设计阶段飞行器末制导交接点的选取提供决策支持。     

Adaptive random search for continuous simulation optimization

We present, analyze, and compare three random search methods for solving stochastic optimization problems with uncountable feasible regions. Our adaptive search with resampling (ASR) approach is a framework for designing provably convergent algorithms that are adaptive and may consequently involve local search. The deterministic and stochastic shrinking ball (DSB and SSB) approaches are also convergent, but they are based on pure random search with the only difference being the estimator of the optimal solution [the DSB method was originally proposed and analyzed by Baumert and Smith]. The three methods use different techniques to reduce the effects of noise in the estimated objective function values. Our ASR method achieves this goal through resampling of already sampled points, whereas the DSB and SSB approaches address it by averaging observations in balls that shrink with time. We present conditions under which the three methods are convergent, both in probability and almost surely, and provide a limited computational study aimed at comparing the methods. Although further investigation is needed, our numerical results suggest that the ASR approach is promising, especially for difficult problems where the probability of identifying good solutions using pure random search is small. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

Multiobjective optimization of friction welding of UNS S32205 duplex stainless steel

The present study is to optimize the process parameters for friction welding of duplex stainless steel(DSS UNS S32205).Experiments were conducted according to central composite design.Process variables,as inputs of the neural network,included friction pressure,upsetting pressure,speed and burn-off length.Tensile strength and microhardness were selected as the outputs of the neural networks.The weld metals had higher hardness and tensile strength than the base material due to grain refinement which caused failures away from the joint interface during tensile testing.Due to shorter heating time,no secondary phase intermetallic precipitation was observed in the weld joint.A multi-layer perceptron neural network was established for modeling purpose.Five various training algorithms,belonging to three classes,namely gradient descent,genetic algorithm and LevenbergeM arquardt,were used to train artificial neural network.The optimization was carried out by using particle swarm optimization method.Confirmation test was carried out by setting the optimized parameters.In conformation test,maximum tensile strength and maximum hardness obtained are 822 MPa and 322 Hv,respectively.The metallurgical investigations revealed that base metal,partially deformed zone and weld zone maintain austenite/ferrite proportion of 50:50.     

微结构阵列超精密车床快刀伺服装置及试验研究

各种微结构阵列在LED照明、液晶显示、光学仪器等领域得到了广泛的应用,但其结构细微复杂且形状表面质量要求高,其加工工艺技术研究引起了广泛的关注。本文提出压电陶瓷驱动结合柔性铰链作为刀架的快刀伺服装置,建立快刀伺服系统的机电耦合模型,研究各系统参数对系统性能的影响规律,基于有限元仿真对铰链结构参数进行优化;通过激光位移传感器测试刀具输出位移的线性度;利用研制的快刀系统和超精密车床在红铜材质的圆柱面上进行正弦网格微结构加工,加工结果表明所设计的快刀系统能够准确有效地加工出结构复杂的微结构阵列。     

基于Matlab仿真的当前统计模型的参数校正

当前统计模型能真实地反映目标机动范围和强度的变化,是目前较好的实用模型。大量实验表明该算法在跟踪机动目标时具有良好的跟踪结果。然而实验中也发现该算法在跟踪具有加速度的目标机动情况时,其速度与加速度估计的动态时延明显位置误差较大,因此不能很好地实时反映目标的机动情况。因此需要进行新的调整参数的设定与比较,使其克服以上的缺点,文章借鉴强跟踪滤波器,在滤波器状态预测协方差矩阵中引入了加权因子并利用M atlab仿真技术,针对当前统计模型中对动态时延影响比较大的几个重要参数,进行了仿真对比和调整。跟踪结果表明:动态时延明显减小,位置误差大幅下降,达到了比较理想的跟踪效果。     

基于来袭鱼雷方位变化率的制导类型识别技术

对来袭鱼雷的制导类型进行识别是水面舰艇实施有针对性鱼雷防御的前提条件,方位变化率则可作为类型识别的一个重要的识别依据。首先,从不同类型潜射鱼雷的发射方式和弹道特征入手,分别推导出潜射直航鱼雷、声自导鱼雷、尾流自导鱼雷方位变化率的表达式。其次,仿真分析了不同类型潜射鱼雷方位变化率的影响因素。最后,在给定的态势下,给出了四种不同类型潜射鱼雷方位变化率随雷舰距离的变化规律曲线。仿真结果能为鱼雷制导类型识别提供一定的参考依据。     

基于ModelCenter的顶置武器站稳定精度优化

顶置武器站具有系统组成类型复杂、子系统间存在耦合作用的特点,导致多学科协同仿真的优化模型难以建立。通过Adams、Simulink分别建立了顶置武器站机械系统及控制系统模型,并在多学科优化设计平台Model Center中对该机电联合仿真模型进行系统集成;在此基础上,以顶置武器站稳定精度为目标函数,采用一阶差分模型对炮控系统比例系数及积分系数进行了灵敏度分析,并采用设计探索优化器对该参数进行了优化设计。仿真结果表明,所建立的顶置武器站稳定精度多学科协同优化模型设计周期短、计算效率高,为下一步进行顶置武器站多工况、多结构参数的优化设计提供技术支撑。