侧贴碳纤维布加固连续梁非线性有限元分析

为研究不同初始荷载作用下侧贴碳纤维布及侧贴预应力碳纤维布加固钢筋混凝土连续梁的加固效果,采用有限元分析软件ABAQUS对其进行数值模拟,并将有限元分析结果与试验结果对比。有限元分析表明：钢筋混凝土连续梁的加固效果受初始荷载的影响,初始荷载越小,加固效果越好;对纵向侧贴碳纤维布施加预应力,能够大幅提高钢筋混凝土连续梁的抗弯承载力,与未加固梁相比其抗弯承载力提高了65%以上;有限元计算结果与试验结果的荷载-挠度曲线吻合较好,两者的抗弯承载力相差不超过10%。所得结果可以为类似加固设计和试验提供参考。     

预应力CFRP筋T形梁受弯性能试验及变形分析

试验通过对3根T形预应力CFRP筋混凝土梁和1根矩形预应力CFRP筋混凝土梁进行对比,考察了预应力CFRP筋混凝土梁的受弯工作性能,记录了试验梁的开裂荷载、极限荷载和裂缝发展情况。试验结果表明：增加预应力度和总配筋率对提高开裂荷载,限制挠度、裂缝发展起重要作用;相同配筋的T形梁和矩形梁挠度相近,但各阶段荷载不同。对预应力CFRP筋T形梁的变形性能进行了理论分析,推导了短期荷载作用下刚度和挠度的计算公式,并将计算值与试验值进行比较,两者吻合良好。     

剪刀撑水泥砂浆网薄层加固砌体墙体拟静力试验

主拉应力破坏是砌体结构在地震荷载作用下最常见的一种破坏形式,剪刀撑水泥砂浆网薄层加固法就是针对砌体结构抵抗主拉应力不足的一种加固方法。为了考察该方法加固砌体墙体的受力性能及加固效果,对6片砂浆强度不同、加固方法不同的墙体试件进行了拟静力试验。试验结果表明：剪刀撑水泥砂浆网薄层加固法能够明显提高砌体墙体的抗剪承载力;该方法更适合于加固砂浆强度较低的砌体墙体;采用该方法加固后的砌体墙体破坏形式以剪切滑移破坏为主;加固面层能够与原有墙体较好地共同工作。目前剪刀撑水泥砂浆网薄层加固法是一个崭新的课题,该拟静力试验给出的试验分析结果和建议可供相关研究和加固工程设计参考。     

钢筋混凝土梁斜截面粘钢加固试验研究

为进一步研究粘钢加固砼梁的斜截面承载力，进行两组梁的粘钢加固试验。通过对第一组钢筋砼梁粘钢试验的阶段性成果分析，阐述了钢筋砼梁斜截面粘钢加固对斜截面承载力的作用。试验得到了被加固砼梁的应变、挠度和破坏形态等重要资料。试验结果表明：梁侧粘贴箍板可有效地控制斜裂缝的开展，有效地提高梁的斜截面承载能力。     

不同增强体镁基复合材料的阻尼性能

研究了短切碳纤维、碳化硅晶须、硼酸铝晶须为增强体的镁基复合材料在外加载荷下的阻尼性能,测量了它们的力学性能与断口特性。研究表明：增强体不同的镁基复合材料,阻尼性能不同;在所研究的几种增强体复合材料中,以短切碳纤维增强镁基复合材料的阻尼效果最好;短切碳纤维增强铁基复合材料界面对内耗有明显的影响。     

基于ANSYS的预应力CFRP布加固混凝土梁有限元分析

采用ANSYS有限元分析软件,对卸载或不卸载时预应力碳纤维(CFRP)布加固梁进行仿真分析,并在有限元分析中提出了施加预应力的方法(升温法),以及利用单元的生与死实现不卸载时加固的方法。通过实例对比分析表明,基于ANSYS的有限元分析结果与试验分析结果吻合较好,可在一定程度上有效替代试验分析方法,从而减少试验所需的时间和费用,对后续的CFRP布加固混凝土结构的研究工作具有一定的参考价值。     

既有锈蚀RC梁剩余抗剪承载力试验

为了准确评估锈蚀RC梁的剩余抗剪承载力,在对6根既有纵筋、箍筋锈蚀都比较严重的混凝土抗弯构件进行了剩余抗剪承力试验研究的基础上,提出了锈蚀RC梁的剩余抗剪承载力计算公式.结果表明,既有锈蚀RC梁挠度曲线没有明显的开裂拐点;破坏时脆性明显,裂缝集中在某一处,间距较大,破坏荷载和屈服荷载接近,受剪破坏形态可能表现为加载点下垂直裂缝引起的破坏.所提出的既有锈蚀RC梁剩余抗剪承载力计算公式与试验结果吻合较好,可为锈蚀RC梁剩余抗剪承载力评估提供一定参考.     

先张预应力BFRP筋混凝土梁受弯性能试验研究

玄武岩纤维筋是一种新型复合材料,具有轻质、高强、非磁性、耐高温、耐酸碱等多重优点.完成了直径为10 mm的BFRP筋基本力学性能测试.进行了3根先张有粘结预应力BFRP筋混凝土梁,1根非预应力BFRP筋混凝土梁的受弯性能对比试验,分析了试验梁受力过程及破坏形态、平截面假定情况、特征荷载值、荷载--挠度关系、裂缝发展情况...     

体外预应力FRP片材加固混凝土结构的研究现状及发展

CFRP片材加固混凝土梁是一种新型的加固方法,但该方法存在着CFRP强度利用不高、对梁使用阶段性能改善不明显等问题,对CFRP施加预应力,不仅可以充分利用CFRP的强度,还能有效地改善加固梁的受力性能,进一步抑制梁的变形和裂缝的开展。体外预应力FRP片材加固混凝土结构近几年来在国外得到了广泛的研究与应用。对在该领域已有的研究成果从预应力的施工工艺、张拉控制应力、锚固措施、预应力损失和设计方法等方面进行了总结,可为今后开展相关的研究和应用提供借鉴和参考。     

BFRP筋无粘结预应力混凝土梁受弯性能试验研究

进行了BFRP筋无粘结部分预应力混凝土梁与全预应力梁、非预应力梁受弯性能对比试验,并对非预应力钢筋配筋率对BFRP筋无粘结预应力混凝土梁受弯性能的影响进行试验研究,再测试各试件的开裂荷载、钢筋屈服点荷载、极限荷载、BFRP筋和普通钢筋应变发展情况、梁顶部及底部混凝土应变发展情况、平截面假定、荷载-变形曲线和裂缝发展情况.在试验研究的基础上,对比分析了各试验参数对受弯性能的影响.     

FE modeling of concrete beams and columns reinforced with FRP composites

Compression and flexure members such as columns and beams are critical in a structure as its failure could lead to the collapse of the structure. In the present work, numerical analysis of square and circle short columns, and reinforced concrete (RC) beams reinforced withfiber reinforced polymer composites are carried out. This work is divided into two parts. In thefirst part, numerical study of axial behavior of square and circular concrete columns reinforced with Glass Fiber Reinforced Polymer (GFRP) and Basalt Fiber Reinforced Polymer (BFRP)bars and spiral, and Carbon Fiber Reinforced Polymer (CFRP) wraps is conducted. The results of the first part showed that the axial capacity of the circular RC columns rein-forced with GFRP increases with the increase of the longitudinal reinforcement ratio. In addition, the results of the numerical analysis showed good correlation with the experimental ones. An interaction diagram for BFRP RC columns is also developed with considering various eccentricities. The results of numerical modeling of RC columns strengthened with CFRP wraps revealed that the number and the spacing between the CFRP wraps provide different levels of ductility enhancement to the column. For the cases considered in this study, column with two middle closely spaced CFRP wraps demonstrated the best performance. In the second part of this research,flexural behavior of RC beams reinforced with BFRP, GFRP and CFRP bars is investigated along with validation of the numerical model with the experimental tests. The results resembled the experimental observations that indicate significant effect of the FRP bar diameter and type ont he flexural capacity of the RC beams. It was also shown that Increasing the number of bars while keeping the same reinforcement ratio enhanced the stiffness of the RC beam.     

体内芳纶纤维筋梁受弯性能试验研究分析

通过钢筋混凝土梁与芳纶纤维筋梁的弯曲试验现象和结果,探讨了芳纶纤维筋梁的正截面受力性能和破坏模式,分析了芳纶纤维筋配筋率对混凝土梁的裂缝宽度、挠度和承载力等的影响,为今后进一步研究和设计AFRP筋受弯构件提供了参考。     

有粘结预应力BFRP筋混凝土梁受弯性能理论研究

玄武岩纤维筋是一种新型复合材料,在国防和特殊建筑工程领域具有重要的应用价值.对不同预应力度的3根有粘结预应力BFRP筋混凝土试验梁进行理论研究,初步探讨和建立预应力BFRP筋混凝土梁的破坏模式判别、正截面受弯承载力、短期刚度、平均裂缝间距、平均裂缝宽度的计算方法,理论计算值与试验结果吻合较好,为建立新型预应力BFRP筋...     

BFRP连续螺旋箍筋混凝土梁抗剪性能试验研究

为研究BFRP连续螺旋箍筋的抗剪性能,设计制作了6根配置BFRP连续螺旋箍筋的混凝土梁和2根配置矩形连续螺旋钢箍的对比混凝土梁.通过试验,得出了BFRP连续螺旋箍筋混凝土梁的抗剪性能,分析了配箍率、剪跨比和纵筋率等因素对构件抗剪性能的影响:构件的受剪破坏模式分为斜拉破坏和斜压破坏两种类型;在不同的受剪破坏模式下,斜裂缝...     

CFRP加固混凝土柱抗震性能的有限元分析

为验证CFRP抗震加固方法的有效性,通过介绍其抗震加固的机理,利用有限元软件ANSYS模拟轴向压力与单向及双向地震往复荷载耦合作用下其加固混凝土柱的抗震性能,并与未加固柱进行对比,论证了其对混凝土柱抗震性能提高的有效性,从而为试验及加固工程施工提供了有效的理论分析方法。     

Investigation of the mechanical and ballistic properties of hybrid carbon/ aramid woven laminates

High-performance ballistic fibers, such as aramid fiber and ultra-high-molecular-weight polyethylene (UHMWPE), are commonly used in anti-ballistic structures due to their low density, high tensile strength and high specific modulus. However, their low modulus in the thickness direction and insufficient shear strength limits their application in certain ballistic structure. In contrast, carbon fiber reinforced epoxy resin matrix composites (CFRP) have the characteristics of high modulus in the thickness direction and high shear resistance. However, carbon fibers are rarely used and applied for protection purposes. A hybridization with aramid fiber reinforced epoxy resin matrix composites (AFRP) and CFRP has the potential to improve the stiffness and the ballistic property of the typical ballistic fiber composites. The hybrid effects on the flexural property and ballistic performance of the hybrid CFRP/AFRP laminates were investigated. Through conducting mechanical property tests and ballistic tests, two sets of reliable simulation parameters for AFRP and CFRP were established using LS-DYNA software, respectively. The experimental results suggested that by increasing the content of CFRP that the flexural properties of hybrid CFRP/AFRP laminates were enhanced. The ballistic tests’ results and the simulation illustrated that the specific energy absorption by the perforation method of CFRP achieved 77.7% of AFRP. When CFRP was on the striking face, the shear resistance of the laminates and the resistance force to the projectiles was promoted at the initial penetration stage. The proportion of fiber tensile failures in the AFRP layers was also enhanced with the addition of CFRP during the penetration process. These improvements resulted in the ballistic performance of hybrid CFRP/AFRP laminates was better than AFRP when the CFRP content was 20 wt% and 30 wt%.