Effect of metal powders on explosion of fuel-air explosives with delayed secondary igniters

In order to improve the energy level of fuel air explosive(FAE) with delayed secondary igniters, high energetic metal powders were added to liquid fuels mainly composed of ether and isopropyl nitrate. Metal powders' explosive properties and reaction mechanisms in FAE were studied by high-speed video, pressure test system, and infrared thermal imager. The results show that compared with pure liquid fuels, the shock wave overpressure, maximum surface fireball temperature and high temperature duration of the mixture were significantly increased after adding high energetic metal powder. The overpressure values of the liquid-solid mixture at all measuring points were higher than that of the pure liquid fuels. And the maximum temperature of the fireball was up to 1700 ℃, which was higher than that of the pure liquid fuels. After replacing 30％of aluminum powder with boron or magnesium hydride, the shock wave pressure of the mixture was further increased. The high heat of combustion of boron and the hydrogen released by magnesium hydride could effectively increase the blast effect of the mixture. The improvement of the explosion performance of boron was better than magnesium hydride. It shows that adding high energetic metal powder to liquid fuels can effectively improve the explosion performance of FAE.     

FAE野外空中爆炸效应实验研究及其一次起爆机理探讨

野外进行1．8kg的FAE静爆实验,采用不同配方的纯固态燃料和液一固混合燃料与等质量的TNT对比分析。实验结果表明,FAE的爆炸效果明显优于等质量的TNT,而纯固态FAE爆炸性能强于液一固混合FAE;FAE爆炸后测到的超压分布呈现单调减趋势,这是由于测量点都分布在云爆区范围之外;FAE的云雾分散效果优于等质量的TNT装药,火焰持续时间也长。通过高速摄影图片看出,合适配方的纯固态无约束的FAE弹体火球的持续时间与有约束的液一固混合FAE弹体相当。分析了纯固态FAE爆炸后超压峰值时刻与火球最大直径时刻不同步的原因,探讨了纯固态FAE一次起爆机理。     

Numerical investigation of the shockwave overpressure fields of multi-sources FAE explosions

Shockwaves from fuel-air explosive (FAE) cloud explosions may cause significant casualties. The ground overpressure field is usually used to evaluate the damage range of explosion shockwaves. In this paper, a finite element model of multi-sources FAE explosion is established to simulate the process of multiple shockwaves propagation and interaction. The model is verified with the experimental data of a fourfold-source FAE explosion, with the total fuel mass of 340 kg. Simulation results show that the overpressure fields of multi-sources FAE explosions are different from that of the single-source. In the case of multi-sources, the overpressure fields are influenced significantly by source scattering distance and source number. Subsequently, damage ranges of overpressure under three different levels are calculated. Within a suitable source scattering distance, the damage range of multi-sources situation is greater than that of the single-source, under the same amount of total fuel mass. This research provides a basis for personnel shockwave protection from multi-sources FAE explosion.     

多喷嘴超声速引射器压力匹配性能试验研究

建立了多喷嘴超声速引射器试验台,采用燃气作为一、二次流驱动工质对多喷嘴超声速引射器进行了试验研究,重点考察了引射器的压力匹配问题。试验结果表明:一次流总压越低,引射喷嘴出口压力越低,与二次流压力匹配越容易;二次流总压越低,保持压力匹配对引射器的要求越高;二次流总温对压力匹配基本无影响。     

浅谈舰载燃料空气炸药武器抗击巡航导弹

通过对FAE武器的特种杀伤效果和对巡航导弹相关技战术性能分析,利用FAE武器(云爆弹)的爆轰、冲击波、破片、窒息和电磁电热效应等特种杀伤效果,剧烈改变导弹的工作环境和对巡航导弹的弹体、导引系统、控制系统和发动机等关键部件进行“软”、“硬”破坏,以期达到抗击巡航导弹的目的,同时阐述了装备水面舰艇的可行性。     

形成条件对二次短路熔珠金相显微组织的影响

实验模拟火场条件,在不同温度下制备了不同线径铜导线在不同电流档下形成的二次短路熔珠,把熔珠在室温下放置不同时间喷水冷却,制成金相试样进行组织观察,寻找火焰温度、线径、短路电流、室温下放置时间、消防射水等条件对二次短路熔珠金相组织的影响。结果显示火焰温度、线径、短路电流、室温下放置时间、消防射水对二次短路熔珠的金相组织都有影响,其中火焰温度和消防射水对二次短路熔珠金相组织影响最大。     

在线学习的主用户仿冒攻击策略

在认知无线网络中,次用户通过频谱感知来学习频谱环境,从而接入那些没有被主用户占用的频谱空隙。事实上,多种恶意攻击的存在会影响次用户频谱感知的可靠性。只有深入研究恶意攻击策略,才能确保认知无线网络的安全。基于此,研究了一种认知无线网络中的欺骗性干扰策略,即主用户仿冒攻击策略,该攻击策略通过在信道上传输伪造的主用户信号来降低次用户频谱感知的性能。具体来说,将攻击策略问题建模为在线学习问题,并提出基于汤普森采样的攻击策略以实现在探索不确定信道和利用高性能信道间的权衡。仿真结果表明,与现有的攻击策略相比,提出的攻击策略能更好地通过在线学习优化攻击决策以适应非平稳的认知无线网络。     

金属冲击温度的测量研究

文中介绍了冲击温度的多波长光谱辐射测量方法。利用光学高温计测量了４５号钢在２３０ＧＰａ左右的冲击压力下的冲击温度值,对所测得的结果进行了比较和分析。     

带壳体云爆弹药液体燃料抛撒的数值模拟

建立了带壳体云爆弹药数值模拟模型,分析了圆柱壳体的断裂准则。壳体材料采用Johnson-Cook热粘性本构方程,断裂准则采用Taylor断裂应力准则,应用Autodyn软件进行了数值模拟,给出了内部爆炸载荷下液体燃料的压力曲线和速度曲线,并进行了分析。     

Effect of microstructure on short pulse duration shock initiation of TATB and initial response mechanism

Micro-TATB particles with different sizes and 3D nanoporous TATB architectures with different specific surface areas were prepared through recrystallization to study short pulse duration shock initiation properties by electric gun technology. For micro-TATB, the initiation threshold significantly decreases with TATB average size ranging from 79.7 μm to 0.5 μm. For 3D nanoporous TATB architecture, the initiation threshold decreases and then increases with specific surface areas increased from 9.6 m²/g to 36.2 m²/g. The lowest initiation thresholds are obtained for the micro-TATB with average sizes of 1.3 μm and 0.5 μm, and 3D nanoporous TATB architecture with specific surface area of 22.4 m²/g. The shock initiation thresholds of micro-TATB and 3D nanoporous TATB architectures show significantly decreases with the porosity increased. The decomposition reaction and thermal conductivity properties were further investigated to understand the initial response mechanism. High porosity provides more collapse sites to generate high temperature for formation of hot spots. The low thermal conductivity and decomposition temperature could enhance the formation and ignition of the hot spots, and initial decomposition reaction of TATB. The effect of the decomposition temperature is higher than that of the thermal conductivity on the shock initiation properties. The enhanced decomposition reaction could promote energy release and transfer process from the ignition to the combustion. This work offers a new insight to understand the effects of microstructure on the shock initiation properties and the initial response mechanism of TATB.     

Experimental study on explosion dispersion process of a multi-layer composite charge under different initiation modes

The influence of initiation modes on the explosive dispersion process of the multi-layer composite charge (MCC) was studied. Overpressure sensors and high-speed photography system were used to investigate the energy release process of an MCC with a specific structure. The shock wave pressure and explosive dispersion characteristics of the MCC under different initiation modes were compared. The forming and expanding process of the shock wave of the composite charge under different initiation modes was determined. The separation position of the shock wave and fireball interface was determined. The calculation formulas of the shock radius and overpressure of the composite charge are presented. The radius of the shock wave of the composite charge was significantly affected by the initiation mode. Moreover, the development process of the composite explosive fireball under different initiation modes was analyzed, the variation rules of the composite charge dispersion radius and fireball dispersion velocity with time were obtained under the different initiation modes, the explosion energy release rate of composite charge under simultaneous initiation modes was the highest, and the peak overpressure under the simultaneous initiation mode was 1.61 times that of central single-point initiation.     

坦克射击过程中炮膛内火药气体温度计算

坦克射击后出现炮膛内壁烧蚀及身管温度上升等问题，其首要因素为火药爆炸燃烧所产生的高温气体。应用内弹道零维模型，以空间平均热力学参数描述坦克射击过程中炮膛内弹道状态，采用四阶龙格一库塔法求解内弹道常微分方程组，计算出内弹道时期火药气体的压力、流速和温度等随时间的变化规律。应用指数函数拟合出后效期炮膛内火药气体温度公式，最后得到坦克整个射击过程中炮膛内火药气体温度的变化规律。通过计算结果与试验数据的对比，验证了计算结果的合理性。此计算结果可为坦克炮身管的烧蚀、热状况及红外辐射特性的研究提供理论依据。     

The case for demilitarising Lesotho

ABSTRACT

The Kingdom of Lesotho spends around five per cent of its annual budget – some 700 million Maloti ($US52.6 million) in 2017 – on the Lesotho Defence Force (LDF). Lesotho’s geographical position means that the LDF has no meaningful role regarding its primary function of defending the country from external aggression and it hardly engages in its secondary functions. In addition, the LDF has a long history of interference with democratic processes and engaging in human rights abuse. The financial resources currently allocated to the LDF could do far more for security, widely defined, if they were allocated to a number of other government expenditure categories.     

太阳辐射作用下的飞机表面温场分布实验研究

提出一种通过缩比模型测试飞机在太阳辐射作用下的表面温度场分布,进而通过有限元方法实现太阳辐射温场的三维模拟显示的实验方法.该方法避免了外场测试条件中自然日光辐射强度不可控和环境温度变化的影响,为飞机在太阳辐射作用下的表面温场理论模型验证和实测提供一种有效的方法,对飞机红外特性、日历寿命等研究具有借鉴意义.     

基于在线学习的频谱感知次序策略*

认知无线电允许次级用户在频谱没有被主用户使用时动态地接入频谱进行数据传输。动态频谱接入是解决无线电频谱资源短缺和使用效率低下问题的有效方案,而频谱感知是实现动态频谱接入的关键挑战之一。次级用户的感知能力有限,为了快速找到频谱空闲概率最大的频段从而获得更多的频谱接入机会,研究了频谱感知次序问题。考虑到频谱空闲概率会随时间变化且对次级用户不可知,提出了一个在线学习框架,把频谱感知次序问题规约成经典多摇臂赌博机问题,并利用在线学习方法——满意折现汤普森抽样算法(satisficing discounted Thompson sampling)处理优化问题。仿真结果表明,和其他算法相比,所提算法可获得更多的频谱接入机会并且能够跟踪频谱空闲概率的变化。     

广州日总太阳辐射估算

利用广州十年内（1995—2004）的气象数据，进行了逐步回归分析，得出估算日总太阳辐射的模型。并通过平均百分误差、平均偏差和均方根误差对各模型的精确性进行了对比，选择出最优模型。最后用实测的日总太阳辐射数据对选出的最优模型进行验证，结果表明，当日总太阳辐射值较大时，模型估算值与实测数据吻合得很好。     

A produce‐to‐stock system with advance demand information and secondary customers

We consider a manufacturer (i.e., a capacitated supplier) that produces to stock and has two classes of customers. The primary customer places orders at regular intervals of time for a random quantity, while the secondary customers request a single item at random times. At a predetermined time the manufacturer receives advance demand information regarding the order size of the primary customer. If the manufacturer is not able to fill the primary customer's demand, there is a penalty. On the other hand, serving the secondary customers results in additional profit; however, the manufacturer can refuse to serve the secondary customers in order to reserve inventory for the primary customer. We characterize the manufacturer's optimal production and stock reservation policies that maximize the manufacturer's discounted profit and the average profit per unit time. We show that these policies are threshold‐type policies, and these thresholds are monotone with respect to the primary customer's order size. Using a numerical study we provide insights into how the value of information is affected by the relative demand size of the primary and secondary customers. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

Locational tying of complementary retail items

We study a selling practice that we refer to as locational tying (LT), which seems to be gaining wide popularity among retailers. Under this strategy, a retailer “locationally ties” two complementary items that we denote by “primary” and “secondary.” The retailer sells the primary item in an appropriate “department” of his or her store. To stimulate demand, the secondary item is offered in the primary item's department, where it is displayed in very close proximity to the primary item. We consider two variations of LT: In the multilocation tying strategy (LT‐M), the secondary item is offered in its appropriate department in addition to the primary item's department, whereas in the single‐location tying strategy (LT‐S), it is offered only in the primary item's location. We compare these LT strategies to the traditional independent components (IC) strategy, in which the two items are sold independently (each in its own department), but the pricing/inventory decisions can be centralized (IC‐C) or decentralized (IC‐D). Assuming ample inventory, we compare and provide a ranking of the optimal prices of the four strategies. The main insight from this comparison is that relative to IC‐D, LT decreases the price of the primary item and adjusts the price of the secondary item up or down depending on its popularity in the primary item's department. We also perform a comparative statics analysis on the effect of demand and cost parameters on the optimal prices of various strategies, and identify the conditions that favor one strategy over others in terms of profitability. Then we study inventory decisions in LT under exogenous pricing by developing a model that accounts for the effect of the primary item's stock‐outs on the secondary item's demand. We find that, relative to IC‐D, LT increases the inventory level of the primary item. We also link the profitability of different strategies to the trade‐off between the increase in demand volume of the secondary item as a result of LT and the potential increase in inventory costs due to decentralizing the inventory of the secondary item. © 2009 Wiley Periodicals, Inc. Naval Research Logistics 2009     

中小学校长教学领导力对教师离职倾向的影响——基于工作满意度与职业倦怠的中介作用

基于问卷调查数据,对中小学校长教学领导力与教师离职倾向之间的关系进行分析。研究发现:中小学校长教学领导力对教师离职倾向有显著的负面影响,校长教学领导力越强,教师离职倾向越低;总体工作满意度、内在工作满意度以及去个性化在中小学校长教学领导力与教师离职倾向之间具有中介作用;外在工作满意度、职业倦怠、情绪衰竭、低成就感的中介作用并不显著。     

红外线式电暖器热辐射引起火灾的研究

本文从理论上阐明了红外线式电暖器引燃可燃物的可能性,通过对普通家具材料的热辐射试验,获取了影响这种引燃的条件和现场残留痕迹物证的特征。这对于安全使用电暖器及其引起火灾原因的调查有着重要的意义。