协同仿真环境的设计与实现

本文从计算机技术和仿真技术的发展和应用需求出发，提出了协同仿真的基本概念和关键技术，包括建模方法、仿真算法、仿真数据库等几个方面。讨论了协同仿真环境的一般体系结构，最后，介绍了一种协同仿真环境的设计和实现方法。     

一种改进的混合BLISS多学科设计优化方法

针对BLISS 2000优化过程中权值系数的引入给实际应用带来的困难,提出一种改进的BLISS优化过程——混合BLISS( Hybrid BLISS,HBLISS).该方法在保持BLISS 2000的基本算法结构的基础上取消权值系数,利用耦合变量的最小残差协调子系统级和系统级优化,给出了HBLISS的算法结构和基本流程...     

Investigation of the mechanical and ballistic properties of hybrid carbon/ aramid woven laminates

High-performance ballistic fibers, such as aramid fiber and ultra-high-molecular-weight polyethylene (UHMWPE), are commonly used in anti-ballistic structures due to their low density, high tensile strength and high specific modulus. However, their low modulus in the thickness direction and insufficient shear strength limits their application in certain ballistic structure. In contrast, carbon fiber reinforced epoxy resin matrix composites (CFRP) have the characteristics of high modulus in the thickness direction and high shear resistance. However, carbon fibers are rarely used and applied for protection purposes. A hybridization with aramid fiber reinforced epoxy resin matrix composites (AFRP) and CFRP has the potential to improve the stiffness and the ballistic property of the typical ballistic fiber composites. The hybrid effects on the flexural property and ballistic performance of the hybrid CFRP/AFRP laminates were investigated. Through conducting mechanical property tests and ballistic tests, two sets of reliable simulation parameters for AFRP and CFRP were established using LS-DYNA software, respectively. The experimental results suggested that by increasing the content of CFRP that the flexural properties of hybrid CFRP/AFRP laminates were enhanced. The ballistic tests’ results and the simulation illustrated that the specific energy absorption by the perforation method of CFRP achieved 77.7% of AFRP. When CFRP was on the striking face, the shear resistance of the laminates and the resistance force to the projectiles was promoted at the initial penetration stage. The proportion of fiber tensile failures in the AFRP layers was also enhanced with the addition of CFRP during the penetration process. These improvements resulted in the ballistic performance of hybrid CFRP/AFRP laminates was better than AFRP when the CFRP content was 20 wt% and 30 wt%.     

一种混合事件仿真调度算法

针对既含有离散事件,又含有连续事件的高炮防空仿真系统提出了一种混合事件仿真调度算法。通过引入绝对仿真时钟和相对仿真时钟,来完成混合事件仿真调度,该算法简化了事件与活动处理的复杂性。     

采用固液冲压发动机的地空导弹弹道建模

针对采用固液混合冲压发动机的地空导弹弹道设计中出现的新问题, 给出了解决这些问题的弹道设计方法, 并利用弹道仿真对其进行了验证。     

基于组件开发方法的反潜武器作战系统训练模拟器设计

为了满足海军训练的需求,提高训练的可信度,需要研制逼真度更高的模拟训练设备。为此,利用基于组件的开发方法设计了混合配置的反潜武器作战系统训练模拟系统。该系统不仅包括仿真设备,还包括实装设备。系统将两个独立的结构整合成一个系统,因此需要软件构架的独特设计。讨论了这一混合配置的系统训练模拟器的设计,提出了在实装战术网络和仿真网络之间的独特的系统接口设计,成功支持了训练模拟器的开发。基于组件开发方法的设计和思路对于训练模拟器材的设计具有很好的参考价值。     

一种宽带信号产生的DDS PLL Hybrid新型结构及实现

DDS+PLL Hybrid结构兼顾DDS和PLL的优势,但也兼具DDS和PLL的缺点:宽带信号性能较差;零相位误差跟踪的实现难度大;环路稳定性差;较长的捕获时间;调频斜率受限等。提出了在传统的DDS+PLL Hybrid结构中增加频率扫描电路的方法,能够有效降低环路设计难度,提高了捕获速度。扫频电路使大带宽、短脉冲的调频信号的产生成为可能。同时提出了预失真相位补偿的方法,极大地提升了信号的脉压性能。设计了实验电路,对所提出的电路结构和相位补偿方法进行了验证。试验结果表明,在环路带宽为1MHz和2MHz时,环路的捕获时间分别减小为2.175μs和1.032μs;相位误差小于4°;信号的脉压性能接近理想,主瓣宽度与理想值相同,PLSR优于-38dB,ISLR优于-9.5dB。     

Hybrid War and Its Countermeasures: A Critique of the Literature

This article examines critically the literature of hybrid war and evaluates the countermeasures often proposed. It explains the concept of hybrid warfare and its varied interpretations, illustrating how it is a manifestation of current anxieties in armed conflict. The selection of the literature is based on works that are referenced, that offer a scientific approach, and which review either the phenomenon of hybrid warfare or its countermeasures empirically. Unscientific works have been omitted. The analysis of the literature presented here shows that the antidotes to ‘hybridity’ lie not in the operational or tactical sphere but in strategic and political domains.     

低速大雷诺数混合飞艇气动性能分析

针对混合飞艇体积巨大同时气动外形复杂使得现有条件的风洞试验很难精确测量其气动性能的问题,开展了适用于混合飞艇气动性能分析的计算流体力学(CFD)的数值分析方法研究。考虑混合飞艇低速大雷诺数的特点,将变分多尺度方法 (VMS)与动态Smagorinsky大涡模拟(LES)模型相结合,提出了组合的VMSLES湍流模型。将基于RANS方法和LES方法的其他三种湍流模型相对比,利用雷诺数相近、实验数据丰富的6:1长椭球飞艇对不同的湍流模型进行了对比验证。结果显示LES方法预测结果与实验结果吻合较好,优于RANS方法,并能显示更多流动细节,而组合的VMS-LES模型能够更精确地捕获实验研究中观察到的二次涡。利用组合的VMS-LES模型对有翼HAV与多囊瓣HAV进行了气动性能分析,并研究了不同部件对飞艇气动特性的影响。结果表明,由于尾翼表面产生的一次涡与二次涡相互作用,尾翼在增加气动升力的同时也增加了阻力。     

Development of cost effective personnel armour through structural hybridization

The objective of the present study is to develop cost effective thermoplastic hybrid laminate using Dyneema® HB50 and Tensylon®HSBD 30A through structural hybridization method. Laminates having 20 mm thickness were fabricated and subjected to 7.62 × 39 mm mild steel core projectile with an impact velocity of 730 ± 10 ms⁻¹. Parameters such as energy absorption, back face deformation and rate of back face deformation were measured as a function of hybridization ratio. It was observed that hybrid laminate with 50:50 ratio (w/w) of Tensylon® and Dyneema® with Tensylon® as front face showed 200% more energy absorption when compared to 100% Tensylon® laminate and showed equal energy absorption as that of expensive 100% Dyneema® laminate. Moreover, hybrid laminate with TD50:50 ratio showed 40% lower in terms of final back face deformation than Dyneema® laminate. Rate of back face deformation was also found to be slow for hybrid laminate as compared to Dyneema® laminate. Dynamic mechanical analysis showed that, Tensylon® laminate has got higher stiffness and lower damping factor than Dyneema® and hybrid laminates. The interface between Tensylon® and Dyneema® layers was found to be separating during the penetration process due to the poor interfacial bonding. Failure behaviour of laminates for different hybridization ratios were studied by sectioning the impacted laminates. It was observed that, the Tensylon® laminate has undergone shear cutting of fibers as major failure mode whereas the hybrid laminate showed shear cutting followed by tensile stretching, fiber pull out and delamination. These inputs are highly useful for body armour applications to design cost effective armour with enhanced performance.