钢丝增强复合条带抗弹性能数值分析

为研究钢丝增强聚合物基复合条带的抗弹性能,基于冲击动力学理论分析其抗弹机理,再借助ANSYS/LS-DYNA软件和LS-PrePost前后处理器模拟有无增强钢丝2种工况下,条带对7.62 mm弹体的冲击响应。分析表明：条带的弹性模量、剪切模量和面密度会影响其能量吸收性能,能量吸收量随三者的增大而增大;由于聚合物基体的正交各向异性,应力云图显示出扁平椭圆状是合理的;在聚合物基复合条带中嵌入增强钢丝对条带整体的抗弹性能有积极的影响,但嵌入过量的钢丝会导致重量和成本的增加,因此需要对合理的钢丝配比率作进一步研究。研究结果可为钢丝增强聚合物基复合条带在野战防护结构中的应用提供参考。     

钢管在冲击荷载作用下的变形与失效破坏

为研究钢管在弹体侵彻过程中的变形特点,基于ANSYS/LS-DYNA软件,采用Johnson-Cook模型,模拟了半球形弹体以不同速度正向冲击钢管时的非线性动力响应情况。结果表明：弹体速度越小,钢管的抗侵彻性能越好;弹体速度越接近临界破坏速度,钢管降低弹体速度的能力就越明显;弹体冲击钢管时,钢管上表面比下表面更容易产生大变形,消耗更多的弹体动能,并在抗侵彻过程中伴有局部凹陷、蝶形变形和贯穿现象。实验结果可为圆柱壳结构钢管在冲击荷载作用下的耗能分析提供参考。     

自由曲面的立体视觉测量与加工一体化研究

对自由曲面的立体现觉测量与加工一体化技术中的图像匹配、曲面造型以及接口设计等问题进行了分析与讨论,并提出了切实可行的解决办法。     

一种新的动态信道化接收机设计方法

针对复杂电磁环境中存在多个非均匀分布的、不同带宽的信号的情况,提出一种新的动态信道化接收机设计方法。设计一个半带滤波器,并通过内插运算压缩它的频率响应,形成周期频谱;对输入信号进行滤波,同时使原信号经过一定延迟后减去滤波后的信号,形成两路在频谱上互补的信号;用均匀分析滤波器组对得到的两路信号分别进行滤波分解处理,实现监视频段的均匀信道化;根据能量检测结果将属于同一信号的相邻子信道信号作为下一步重构处理的输入,并设计出相应的综合滤波器组提取信号。理论分析和仿真结果验证了新方法的有效性。     

Weighted vertex packing problem for specially structured geometric graphs

Consider a set of vertices V = {1, 2,…, n} placed on a two-dimensional Euclidean plane R² with each vertex attached a nonnegative weight w: V → R. For a given constant d>0, the geometric graph G = (V, E) is defined to have edge set E = {(i, j): d_ij ⩽ d} with d_ij being the Euclidean distance between vertices i and j. The geometric vertex packing (GVP) problem, which is often called the independent set problem, is defined as selecting the set of pairwise nonadjacent vertices with maximum total weight. We limit our attention to the special case that no vertex is within a distance βd of any other vertices where 0 ⩽ β < 1. A special value of β (= 1/2) is referred to frequently because of its correspondence to a manufacturing problem in circuit board testing. In this article we show that the weighted vertex packing problem for the specially structured geometric graph (SGVP) defined with the above restriction is NP-complete even for the case that all vertex weights are unity and for any β. Polynomial procedures have been designed for generating cuts to obtain tight LP upper bounds for the SGVP. Two heuristics with bounded worst-case performance are applied to the LP solution to produce a feasible solution and a lower bound. We then use a branch-and-bound procedure to solve the problem to optimality. Computational results on large-scale SGVP problems will be discussed. © 1995 John Wiley & Sons, Inc.     

三轴磁强计晃动对测量结果的影响分析及校正

三轴磁强计的主要误差有零偏误差、灵敏度误差以及三轴非正交误差。通过在三轴正交坐标体系下对传感器的三轴非正交误差进行分析,建立了传感器误差模型,分析了误差对传感器晃动所产生的影响。晃动1°产生的误差最大可达109.5 nT,晃动误差随着晃动角度的增加而增加。为控制晃动误差,通过对误差模型分析建立误差校正模型,并通过非线性曲线拟合对校正模型参数准确估计,将估计参数代入校正模型,可以实现对传感器输出校正,使其输出误差大大减小,晃动1°产生的误差范围可控制在0.03 nT以内。这表明该校正方法有效地降低了晃动对传感器输出产生的影响。     

Branch‐and‐price‐and‐cut for the manpower routing problem with synchronization constraints

In this article, we propose a branch‐and‐price‐and‐cut (BPC) algorithm to exactly solve the manpower routing problem with synchronization constraints (MRPSC). Compared with the classical vehicle routing problems (VRPs), the defining characteristic of the MRPSC is that multiple workers are required to work together and start at the same time to carry out a job, that is, the routes of the scheduling subjects are dependent. The incorporation of the synchronization constraints increases the difficulty of the MRPSC significantly and makes the existing VRP exact algorithm inapplicable. Although there are many types of valid inequalities for the VRP or its variants, so far we can only adapt the infeasible path elimination inequality and the weak clique inequality to handle the synchronization constraints in our BPC algorithm. The experimental results at the root node of the branch‐and‐bound tree show that the employed inequalities can effectively improve the lower bound of the problem. Compared with ILOG CPLEX, our BPC algorithm managed to find optimal solutions for more test instances within 1 hour. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 138–171, 2016     

一类随机差分方程的解序列的最优停止规则

设报酬序列{x_(?),(?),n≥0}满足随机差分方程x_(n+1)=x_n+a_n+b_nε_(n+1)(ε_1,ε_2,…为白噪声序列)。本文讨论了用有限情形{x_n,0≤n≤N}的Snell包逼近无限情形{x_n,n≥0)的Snell包的条件,得到了x_n=E(x_n|(?))((?)=σ{ε_0,ε_1,…,ε_n},ε_0=0)的Snell包r_n的分解形式和最优停时存在的条件。最后讨论了最优停止规则的迭代计算法,并得出了迭代过程在有限步停止的充分条件。     

中温石墨流态床热处理炉的加热装置与电极设计

本文以笔者早年设计的小型石墨流态床热处理炉(LTR)和随后研制大功率炉的经验,讨论加热装置的最佳方案和电极设计的有关问题,通过理论分析和试验,给出950℃以下的温度-电阻曲线和屏蔽电极区间的电压-幂次和电阻-幂次曲线。     

双字长浮点乘法运算算法设计与分析

文中给出了在计算机上实现双字长浮点乘法运算的算法的计算公式、计算步骤及误差估计,算法原理适用于一般计算机系统的任意字长浮点乘法运算。