评估C4ISR系统的目标分配质量

分析了影响防空C4ISR系统目标分配质量的主要因素,并以此定义了5个基本指标.利用线性加权法给出了一架歼击机对一架目标机的分配能力的计算方法,以此为基础提出了不同机场的多类歼击机对多批目标的分配能力的算法.最后通过实例计算验证了模型的正确性和实用性.     

Optimization of buckling load for laminated composite plates using adaptive Kriging-improved PSO: A novel hybrid intelligent method

An effective hybrid optimization method is proposed by integrating an adaptive Kriging (A-Kriging) into an improved partial swarm optimization algorithm (IPSO) to give a so-called A-Kriging-IPSO for maxi-mizing the buckling load of laminated composite plates (LCPs) under uniaxial and biaxial compressions. In this method, a novel iterative adaptive Kriging model, which is structured using two training sample sets as active and adaptive points, is utilized to directly predict the buckling load of the LCPs and to improve the efficiency of the optimization process. The active points are selected from the initial data set while the adaptive points are generated using the radial random-based convex samples. The cell-based smoothed discrete shear gap method (CS-DSG3) is employed to analyze the buckling behavior of the LCPs to provide the response of adaptive and input data sets. The buckling load of the LCPs is maximized by utilizing the IPSO algorithm. To demonstrate the efficiency and accuracy of the proposed methodology, the LCPs with different layers (2, 3, 4, and 10 layers), boundary conditions, aspect ratios and load patterns (biaxial and uniaxial loads) are investigated. The results obtained by proposed method are in good agreement with the literature results, but with less computational burden. By applying adaptive radial Kriging model, the accurate optimal results-based predictions of the buckling load are obtained for the studied LCPs.     

Combustion of B4C/KNO3 binary pyrotechnic system

Presented herein is an experimental study on the combustion of B4C/KNO3 binary pyrotechnic system.Combustion products were tested using X-ray diffraction(XRD),scanning electron microscopy(SEM),and energy dispersive spectrometer(EDS).According to the results of tests and CEA calculation,the combustion reaction equation was established.The flames and burning rates were recorded by a high speed camera and a spectrophotometer.The effect of B4C particle size on the thermal sensitivity of B4C/KNO3 was investigated by differential scanning calorimetry(DSC)techniques.In addition,a reliable method for calculating the flame temperature was proposed.Based on the results of experiments,the combustion reaction mechanism was briefly analyzed.The burning rate,flame temperature and thermal sensitivity of B4C/KNC3 increase with the decrease of B4C particle size.The mass ratio of B4C/KNO3 has a great effect on combustion properties.Oxidizer-rich compositions have low flame temperatures,low burning rates,and provide green light emission.The combustion reactions of fuel-rich compositions are vigorous,and the B4C/KNO3 with mass ratio of 25:75 has the highest burning rate and the highest flame temperature.     

Theoretical design of new bridge-ring insensitive high energy compounds by selected normal Diels-Alder reactions between NH2-substituted oxazoles and NO2/NF2/NHNO2-substituted ethylenes/acetylenes

In this work, NH₂-substituted oxazoles and NO₂/NF₂/NHNO₂-substituted ethylenes/acetylenes were designed and used as dienes and dienophiles, respectively, in order to develop new bridge-ring insensitive high energy compounds through the Diels-Alder reaction between them. The reaction type, reaction feasibility and performance of reaction products were investigated in detail theoretically. The results showed that dienes most possibly react with dienophiles through the HOMO-diene controlled normal Diels-Alder reaction at relatively low energy barrier. Tetranitroethylene could react with the designed dienes much more easily than other dienophiles, and was employed to further design 29 new bridge-ring energetic compounds. Due to high heat of formation, density and oxygen balance, all designed bridge-ring energetic compounds have outstanding detonation performance, 16 of them have higher energy than HMX (1,3,5,7-tetranitro-1,3,5,7-tetrazocine) and 2 others even possess comparative energy with the representative of high energy compounds CL-20 (2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane). The predicted average h₅₀ value of these bridge-ring energetic compounds is 83 cm, showing their low impact sensitivity. The NH₂ groups could obviously impel the proceeding of Diels-Alder reactions, but would slightly decrease the energy and sensitivity performance. In all, the new designed bridge-ring compounds have both high energy and low sensitivity, and may be produced through Diels-Alder reactions at relatively low energy barrier. This paper may be helpful for the theoretical design and experiment synthesis of new advanced insensitive high energy compounds.     

Damage to aircraft composite structures caused by directed energy system: A literature review

This paper presents a comprehensive review of the research studies on direct energy system effect on aircraft composite structures to develop a good understanding of state-of-the-art research and devel-opment in this area. The review begins with the application of composite materials in the aircraft structures and highlights their particular areas of application and limitations. An overview of directed energy system is given. Some of the commonly used systems in this category are discussed and the working principles of laser energy systems are described. The experimental and numerical studies re-ported regarding the aircraft composite structures subject to the effect of directed energy systems, especially the laser systems are reviewed in detail. In particularly, the general effects of laser systems and the relevant damage mechanisms against the composite structures are reported. The review draws attention to the recent research and findings in this field and is expected to guide engineers/researchers in future theoretical, numerical, and experimental studies.     

新时期军队政治工作要为科技强军提供强大精神动力

新时期军队政治工作 ,必须突出科技强军这一时代要求 ,为科技强军提供强大的精神动力 ,既要为科技强军提供有力的思想舆论支持 ,又要为科技强军培养高素质的科技人才队伍 ,同时要实现政治工作自身的从思想观念到手段方法的超越和发展。     

基于VDCNN和LSTM混合模型的入侵检测算法

为了提高入侵检测系统在复杂数据集下的分类性能,提出一种将超深度卷积网络(very deep convolu-tional neural networks,VDCNN)和长短时记忆网络(long short-term memory,LSTM)混合模型的入侵检测算法.本模型通过CICFlowMeter工具对CES-CIC-...     

INS 故障模型和推理方法的研究与设计

讨论了某型惯导 ( INS)设备的结构、工作流程和故障特点 ,分析了基于知识的专家系统 ( ES)常用的诊断模型和推理方法 ,在此基础上 ,设计了具体的基于对象的惯导综合层次模型及其推理机 .该模型和推理机已实际应用于该型 INS的故障诊断专家系统的设计     

软硬交替多层膜法向压入过程的有限元分析

采用大变形弹塑性有限单元法,对高速钢基体上的软硬交替多层膜在法向压痕作用下的力学行为,进行了模拟和分析.为了研究膜层数和膜厚的影响,对从单层到16层的不同膜层体系进行了计算.通过对诸如膜层的变形、最大应力随膜层数的变化、界面剪应力分布、表面张应力分布等的分析,得出了这些参数的分布及其对膜层体系的摩擦学性能的影响.这些结果可为多层膜的结构优化设计提供定量的依据.     

中国特色国防研究30年·国防经济篇

国防经济是国民经济的重要组成部分，是直接为保障国防建设、国家安全和战争需要而进行的经济活动。改革开放30年来，学界针对国防经济建设在新形势下出现的新情况、新特点，着力构建和完善中国特色国防经济科学理论体系，着力解决社会主义市场经济条件下国防经济建设中出现的重点难点问题，取得了丰硕的研究成果。