Numerical and experimental study on the response characteristics of warhead in the fast cook-off process

The response characteristics of the warhead under thermal stimuli conditions are important to the safety improvement. The goal of this study is to obtain data on the warhead in the fast cook-off process. In this paper, a numerical calculation method is proposed, whose reliability is supported by comparison with experimental results. Through the numerical calculation, the temperature distribution, temperature change, and ignition time are acquired. The numerical results show that the ignition time is 76 s after the warhead started to burn and that the maximum temperature of the explosive's outer surface is 238.3 C at the ignition time. The fast cook-off experiment of the warhead is implemented so as to get the flame temperature and reaction grades that are not available through numerical calculation. The experimental results show that the overpressure fails to reach the preset minimum value which is equivalent to 6 kg of TNT and that the reaction grade is deflagration. The research results have reference value for the design of the warhead and the reduction of detonation risks.     

Thermodynamics and performance of Al/CuO nanothermite with different storage time

The storage stability of energetic materials is important for its application. Here, the storage stability of Al/CuO nanothermite, which was prepared by electrospray method and stored with different storage time, was systematically researched. The activation energy of Al/CuO nanothermite was calculated by differential scanning calorimetry (DSC). The ignition temperature and the curve pressure history of Al/CuO nanothermite was measured using ignition temperature measuring device and constant-volume pressurization tests, respectively. Further, the thermites were characterized by X-ray Diffractometer (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM) and Transmission electron microscopy (TEM). The results show that the morphology of the thermites did not change significantly. The activation energy was decreased from 254.1 kJ/mol to 181.8 kJ/mol after storage for 13 months. When stored for 0, 7 and 13 months, the peak pressures of Al/CuO nanothermite were 685.8 kPa, 626.3 kPa and 625.5 kPa, respectively. In addition to the ignition temperature, it was 775 ℃, 739 ℃ and 754 ℃, respectively. This result indicated that the ignition and combustion properties of Al/CuO nano-thermite are obviously reduced when stored for a long time, at room temperature.     

Hazard evaluation of ignition sensitivity and explosion severity for three typical MH2 (M＝Mg,Ti, Zr) of energetic materials

MgH2, TiH2, and ZrH2 are three typical metal hydrides that have been gradually applied to composite explosives and propellants as additives in recent years. To evaluate ignition sensitivity and explosion severity, the Hartmann device and spherical pressure vessel were used to test ignition energy and ex-plosion pressure, respectively. The results showed that the ignition sensitivity of ZrH2, TiH2 and MgH2 gradually increased. When the concentration of MgH2 is 83.0 g/m3 in Hartmann device, the ignition energy attained a minimum of 10.0 mJ. The explosion pressure of MgH2 were 1.44 times and 1.76 times that of TiH2 and ZrH2, respectively, and the explosion pressure rising rate were 3.97 times and 9.96 times that of TiH2 and ZrH2, respectively, through the spherical pressure vessel. It indicated that the reaction reactivity and reaction rate of MgH2 were higher than that of TiH2 and ZrH2. In addition, to conduct in-depth theoretical analysis of ignition sensitivity and explosion severity, gas production and combus-tion heat per unit mass of ZrH2, TiH2 and MgH2 were tested by mercury manometer and oxygen bomb calorimetry. The experimental results revealed that MgH2 had a relatively high gas production per unit mass (5.15 mL/g), while TiH2 and ZrH2 both had a gas production of less than 2.0 mL/g. Their thermal stability gradually increased, leading to a gradual increase in ignition energy. Furthermore, compared with theoretical combustion heat, the combustion ratio of MgH2, TiH2 and ZrH2 was more than 96.0%, with combustion heat value of 29.96, 20.94 and 12.22 MJ/kg, respectively, which was consistent with the explosion pressure and explosion severity test results.     

装备科研招标项目的价值工程评标模型

应用价值工程分析方法系统研究装备科研招标项目的评标问题,提出了功能指标体系,建立了功能评价系数、成本评价系数和价值评价系数模型,并举例介绍了此评标方法的实现过程。     

进度风险的随机网络建模与仿真分析

为研究装备研制工程进度的风险分布特征,建立了包含正态分布、β分布、三角分布的随机网络进度风险分析模型,通过蒙特卡罗法仿真获得工程项目的进度估计及其统计分布特性,从而获得工程总工期的风险,并结合实例进行了分析.     

内燃机噪声控制的现状与发展

军用装备动力设备噪声过大严重影响指战员的通讯,对身心会造成严重的伤害.介绍了内燃机噪声控制技术的发展过程和最新技术,对隔声罩的设计作了较为详细的阐述.针对军用装备动力设备噪声过大的问题,提出采用隔声罩是较为行之有效的处理方法.     

我军培养军人道德人格的主要历史经验

本文指出军人道德人格是军人内在道德素质和外在道德形象的总和与统一。军人的道德人格对军人个体的全面发展、对军队战斗力的生成与提高、对军队在全社会中教育引导功能的发挥都起着重要的作用。在此基础上,本文充分肯定了我军对军人道德人格的培养和塑造,总结和归纳了我军培养军人道德人格的四条主要历史经验,即以指定道德规范为基本前提;以进行道德教育为中心环节;以渗透军事实践为主要渠道;以树立人格榜样为重要方法。以期对新形势下培养和塑造我军军人的道德人格具有一定的借鉴价值。     

基于直接数据域自适应算法的相干信号DOA估计

利用直接数据域自适应算法的稳态权值代替噪声子空间构建空间谱,构造了一种超分辨波达方向(DOA)估计方法.为了解决谱峰搜索时的伪峰问题,采用参考阵元轮换得到多组线性无关稳态权值,逼近噪声子空间,能有效去除伪峰.针对相干信号的DOA估计,进一步提出了直接数据域取对称共轭向量的解相干方法.相比子空间分解类算法,本文算法不需估计信号源数目和协方差矩阵、不需特征分解,复杂度仅为O(MP),同时能有效完成解相干处理.     

Resale price maintenance contracts with retailer sales effort: Effect of flexibility and competition

In Resale Price Maintenance (RPM) contracts, the manufacturer specifies the resale price that retailers must charge to consumers. We study the role of using a RPM contract in a market where demand is influenced by retailer sales effort. First, it is well known that RPM alone does not provide incentive for the retailer to use adequate sales effort and some form of quantity fixing may be needed to achieve channel coordination. However, when the market potential of the product is uncertain, RPM with quantity fixing is a rigid contract form. We propose and study a variety of RPM contracts with quantity fixing that offer different forms of flexibility including pricing flexibility and quantity flexibility. Second, we address a long‐time debate in both academia and practice on whether RPM is anti‐competitive in a market when two retailers compete on both price and sales effort. We show that depending on the relative intensity of price competition and sales effort competition, RPM may lead to higher or lower retail prices compared to a two‐part tariff contract, which specifies a wholesale price and a fixed fee. Further, the impact of RPM on price competition and sales effort competition is always opposite to each other. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

活性污泥膨胀的机理与控制

简述了污泥膨胀的诱发机理,提出了丝状菌引起污泥膨胀时,发芽期孢子的异常,指出菌胶团和丝状菌是共生关系。分析溶解氧浓度、水质条件和有机物-污泥负荷对污泥膨胀的影响,并从预防、常规处理和应急措施三方面综述了污泥膨胀的控制措施。