【专题】装备保障数据中心体系结构设计

数据中心作为支撑装备保障指挥、管理、维修、供应及训练等业务运行的重要基础,是数据交换的枢纽和各级数据的总汇,也是信息服务的中心,对深化装备保障信息需求、实现保障信息有效管理和强化保障信息综合应用至关重要。本文面向装备保障数据中心建设需求,分析了装备保障数据中心的内涵及其在数据汇聚存储、数据共享交换、保障决策支持及综合信息服务等方面的重要作用,从总体架构、物理结构和数据结构三个方面开展了数据中心体系结构设计;同时,立足装备保障数据中心建设与应用,针对应该重点把握的数据标准规范建设、配套数据采集手段、加强安全保密建设、完善运维管理体系及建立专业分析团队等问题进行了阐述。研究成果可为实际开展装备保障数据中心建设提供 参考。     

A melt-cast Duan-Zhang-Kim mesoscopic reaction rate model and experiment for shock initiation of melt-cast explosives

A melt-cast Duan-Zhang-Kim (DZK) mesoscopic reaction rate model is developed for the shock initiation of melt-cast explosives based on the pore collapse hot-spot ignition mechanism. A series of shock initiation experiments was performed for the Comp B melt-cast explosive to estimate effects of the loading pressure and the particle size of granular explosive component, and the mesoscopic model is validated against the experimental data. Further numerical simulations indicate that the initial density and formula proportion greatly affect the hot-spot ignition of melt-cast explosives.     

Theoretical design of new bridge-ring insensitive high energy compounds by selected normal Diels-Alder reactions between NH2-substituted oxazoles and NO2/NF2/NHNO2-substituted ethylenes/acetylenes

In this work, NH₂-substituted oxazoles and NO₂/NF₂/NHNO₂-substituted ethylenes/acetylenes were designed and used as dienes and dienophiles, respectively, in order to develop new bridge-ring insensitive high energy compounds through the Diels-Alder reaction between them. The reaction type, reaction feasibility and performance of reaction products were investigated in detail theoretically. The results showed that dienes most possibly react with dienophiles through the HOMO-diene controlled normal Diels-Alder reaction at relatively low energy barrier. Tetranitroethylene could react with the designed dienes much more easily than other dienophiles, and was employed to further design 29 new bridge-ring energetic compounds. Due to high heat of formation, density and oxygen balance, all designed bridge-ring energetic compounds have outstanding detonation performance, 16 of them have higher energy than HMX (1,3,5,7-tetranitro-1,3,5,7-tetrazocine) and 2 others even possess comparative energy with the representative of high energy compounds CL-20 (2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane). The predicted average h₅₀ value of these bridge-ring energetic compounds is 83 cm, showing their low impact sensitivity. The NH₂ groups could obviously impel the proceeding of Diels-Alder reactions, but would slightly decrease the energy and sensitivity performance. In all, the new designed bridge-ring compounds have both high energy and low sensitivity, and may be produced through Diels-Alder reactions at relatively low energy barrier. This paper may be helpful for the theoretical design and experiment synthesis of new advanced insensitive high energy compounds.     

Peridynamic modeling and simulation of thermo-mechanical de-icing process with modified ice failure criterion

De-icing technology has become an increasingly important subject in numerous applications in recent years. However, the direct numerical modeling and simulation the physical process of thermo-mechanical deicing is limited. This work is focusing on developing a numerical model and tool to direct simulate the de-icing process in the framework of the coupled thermo-mechanical peridynamics theory. Here, we adopted the fully coupled thermo-mechanical bond-based peridynamics (TM-BB-PD) method for modeling and simulation of de-icing. Within the framework of TM-BB-PD, the ice consti-tutive model is established by considering the influence of the temperature difference between two material points, and a modified failure criteria is proposed, which takes into account temperature effect to predict the damage of quasi-brittle ice material. Moreover, thermal boundary condition is used to simulate the thermal load in the de-icing process. By comparing with the experimental results and the previous reportedfinite element modeling, our numerical model shows good agreement with the pre-vious predictions. Based on the numerical results, we find that the developed method can not only predict crack initiation and propagation in the ice, but also predict the temperature distribution and heat conduction during the de-icing process. Furthermore, the influence of the temperature for the ice crack growth pattern is discussed accordingly. In conclusion, the coupled thermal-mechanical peridynamics formulation with modified failure criterion is capable of providing a modeling tool for engineering ap-plications of de-icing technology.     

Dissimilar friction stir spot welding of AA2024-T3/AA7075-T6 aluminum alloys under different welding parameters and media

This paper studies the friction stir spot welding of AA2024-T3/AA7075-T6 Al alloys in the ambient and underwater environments by clarifying the nugget features,microstructure,fracture and mechanical properties of the joints.The results show that the water-cooling medium exhibits a significant heat absorption capacity in the AA2024-T3/AA7075-T6 welded joint.Nugget features such as stir zone width,circular imprints,average grain sizes,and angular inter-material hooking are reduced by the water-cooling effect in the joints.Narrower whitish(intercalated structures)bands are formed in the under-water joints while Mg2Si and Al2CuMg precipitates are formed in the ambient and the underwater welded joints respectively.An increase in tool rotational speed(600-1400 rpm)and plunge depth(0.1-0.5 mm)increases the tensile-shear force of the welded AA2024-T3/AA7075-T6 joints in both the ambient and underwater environments.The maximum tensile-shear forces of 5900 N and 6700 N were obtained in the ambient and the underwater welds respectively.     

The effect of al particle size on thermal decomposition,mechanical strength and sensitivity of Al/ZrH2/PTFE composite

To study the thermal decomposition of Al/ZrH2/PTFE with different Al particle size as well as mechanical strength and impact sensitivity under medium and low strain rates, molding-vacuum sintering was adopted to prepare four groups of power materials and cylindrical specimens with different Al particle size. The active decomposition temperature of ZrH2 was obtained by TG-DSC, and the quasi-static me-chanics/reaction characteristics as well as the impact sensitivity of the specimen were studied respec-tively by quasi-static compression and drop-hammer test. The results show that the yield strength of the material decreased with the increase of the Al particle size, while the compressive strength, failure strain and toughness increased first and then decreased, which reached the maximum values of 116.61 MPa, 191％, and 119.9 MJ/m respectively when the Al particle size is 12—14μm because of particle size grading. The specimens with the highest strength and toughness formed circumferential open cracks and reacted partly when pressed. Those with developmental cracks formed inside did not react. It is considered that fracture of specimens first triggered initial reaction between Al and PTFE to release an amount of heat. Then ZrH2 was activated and decomposed, and participated in subsequent reaction to generate ZrC. The impact sensitivity of the specimens decreased with the increase of Al particle size.     

Opening behavior of PELE perforation on reinforced concrete target

Impact velocity (v0), target strength (fc) and target thickness (hc) are important factors affecting opening damage ((D)) of PELE penetration into RC target. In this paper, based on the three influence factors of v0, fc and hc, experimental and numerical simulation studies on PELE penetration into RC target were carried out. The study results show that: (1) Since interaction force (or penetration resistance) between pro-jectile and target is positively correlated with v0 and fc, with the increase of v0 and fc, deformation mode of jacket is changed from small bending deformation to large bending deformation and then to curling deformation. Therefore, the variation of jacket deformation mode causes opening diameter of RC target to increase first and then to decrease. It is found that the two factors approximately satisfy a quadratic function relationship, respectively. (2) For PELE projectile penetrating RC targets with thickness of 80—400 mm, the opening diameter of six sets of RC targets grows from 240 to 500 mm, and hc with (D) approximately satisfy a linear relationship. (3) Based on the above study results, the relationship be-tween two dimensionless parameters (I= (mv20/d31fc) and H= hc/l ) and dimensionless opening diameter ((D)/d1) was determined. Combined with the results of previous research, a dimensionless opening diameter model (D)/d1=f1(Q,G,I)f2(H) was established. By tests verified, the test results are all within ±10％error of the theoretical model, which verifies the accuracy of the model.     

Dynamic necking of a near α titanium alloy at high strain rates:Experiments and modelling

The tensile behaviour of near α Ti3Al2.5 V alloy, conceived for applications in aerospace and automotive engineering, is characterized from quasi-static to high strain rates. The material is found to present noticeable strain rate sensitivity. The dynamic true strain rate in the necking cross-section reaches values up to ten times higher than the nominal strain rate. It is also observed that beyond necking the dynamic true stress-strain curves present limited rate dependence. The experimental results at different strain rates are used to determine a suitable constitutive model for finite element simulations of the dynamic tensile tests. The model predicts the experimentally macroscopic force-time response, true stress-strain response and effective strain rate evolution with good agreement.     

Fabrication and characterization of Al-CuO nanocomposites prepared by sol-gel method

In this study, Al-CuO nanocomposites were fabricated by sol-gel method. As a contrast, the thermite was prepared by physical mixing at the equivalence ratio of 0.5, 1, 2, respectively. The intermediates and samples as prepared were characterized by SEM and XRD. The exothermic properties of the two samples prepared at different equivalence ratios were tested and the reaction products were characterized by XRD. The SEM results show that the sample prepared by the sol-gel method demonstrates a micron-sized agglomerated sphere formed by a mutual wrapping of Al NPs and CuO NPs, and the particles are evenly distributed in the agglomerate. In addition, when the content of Al powder is seriously insufficient, the heat release of the sample prepared by physical mixing is 1.6 times that of by sol-gel method. With the increase of Al powder content, the exothermic properties of Al/CuO NPs prepared by sol-gel method began to increase significantly compared with physical mixing and the difference is 1.5 times when the equivalence ratio increases to 2. It can be concluded that the reason for this result may be attributed to the different mass transfer modes of components due to the different morphologies of samples.     

Damage to aircraft composite structures caused by directed energy system: A literature review

This paper presents a comprehensive review of the research studies on direct energy system effect on aircraft composite structures to develop a good understanding of state-of-the-art research and devel-opment in this area. The review begins with the application of composite materials in the aircraft structures and highlights their particular areas of application and limitations. An overview of directed energy system is given. Some of the commonly used systems in this category are discussed and the working principles of laser energy systems are described. The experimental and numerical studies re-ported regarding the aircraft composite structures subject to the effect of directed energy systems, especially the laser systems are reviewed in detail. In particularly, the general effects of laser systems and the relevant damage mechanisms against the composite structures are reported. The review draws attention to the recent research and findings in this field and is expected to guide engineers/researchers in future theoretical, numerical, and experimental studies.