二维Turbo编码的无人机通信研究

传统基于RS-Turbo码的系统需要提供RS译码及Turho译码2种不同的译码算法需求,使得译码器的软硬件设计复杂化,无法满足无人机通信要求.从理论上分析了Turbo码的性能特点,提出一种改进的二维turbo迭代算法,并应用在无人机通信仿真中.仿真结果表明该算法在低信噪比时能够提升误码率性能,且易于工程实现.     

Evaluating methods for the reliability of a large 2‐dimensional rectangular k‐within‐consecutive‐(r,s)‐out‐of‐(m,n):F system

A 2‐dimensional rectangular k‐within‐consecutive‐(r, s)‐out‐of‐(m, n):F system consists of m × n components, and fails if and only if k or more components fail in an r × s submatrix. This system can be treated as a reliability model for TFT liquid crystal displays, wireless communication networks, etc. Although an effective method has been developed for evaluating the exact system reliability of small or medium‐sized systems, that method needs extremely high computing time and memory capacity when applied to larger systems. Therefore, developing upper and lower bounds and accurate approximations for system reliability is useful for large systems. In this paper, first, we propose new upper and lower bounds for the reliability of a 2‐dimensional rectangular k‐within‐consecutive‐(r, s)‐out‐of‐(m, n):F system. Secondly, we propose two limit theorems for that system. With these theorems we can obtain accurate approximations for system reliabilities when the system is large and component reliabilities are close to one. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005     

基于DoDAF的反导指控系统体系结构模型研究

首先简要介绍了美军反导指控系统和国防部体系结构框架(department of defense archi-tecture framework,DoDAF)的基本情况,确定了体系结构模型开发方法和步骤,然后利用Telelogic公司的system architect软件完成了作战视图、系统视图的分析与设计,为理解指控系统内在规律、开展指控系统顶层设计研究提供理论支持。     

防毒面具滤毒罐吸附剂的发展与展望

现有防毒面具滤毒罐主要使用活性炭或浸渍炭作为吸附剂,存在如存储周期和有效使用时间均较短的缺陷。在回顾防毒面具及其滤毒罐吸附剂的基础上,对防毒面具滤毒罐吸附剂的发展进行了展望。     

2-一致光滑Banach空间中k-严格伪压缩半群公共不动点的隐格式迭代算法

对于Banach空间中女一严格伪压缩半群的公共不动点给出了隐格式迭代算法,证明了一个强收敛定理,推广并扩展了相关结论。     

超临界二氧化碳流体中L-丙交酯开环聚合物的合成及表征

在超临界二氧化碳流体中用辛酸亚锡作催化剂,用左旋丙交酯开环聚合成功地合成了相对分子质量大于80 000,分散指数为2.5的聚左旋乳酸.深入研究了聚合温度、时间、压力、单体浓度、催化剂用量及超临界二氧化碳纯度等各种因素对聚左旋乳酸相对分子质量及其分布的影响,对聚合物的相对分子质量和分布采用凝胶渗析色谱、1HNMR谱、13...     

22SiMn2TiB装甲钢异种焊接接头超声波探伤探头设计

用常规探头对22SiMn2TiB装甲钢与TWE312异种钢焊接接头进行缺陷检测,杂波和伪缺陷波导致灵敏度、信噪比不高。用扫描电镜观察到这种异种钢焊接接头主要为奥氏体+铁素体组织,其中奥氏体是主体组织。根据焊缝的组织特点,设计出了2.5P13×13K1.5型专用探头。在预制缺陷的焊接接头上进行了验证试验,结果表明2.5P13×13K1.5探头对接头内部的缺陷具有较高的检出率。     

基于两坐标雷达与红外传感器的融合跟踪

针对两坐标雷达与红外传感器的融合跟踪问题,提出一套基于航迹关联事件的后验概率最大化准则和"最近邻"思想的状态信息相关与融合估计的一体化实现方法,克服了两种传感器观测数据不完整给融合处理带来的困难,通过充分利用雷达的航迹,点迹和历史信息,融合高精度的红外测角和雷达测距信息,改善系统的跟踪能力.最后的仿真实验表明了该方法的有效性.     

Fabrication and analysis of TIG welding-brazing butt joints of in-situ TiB2/7050 composite and TA2

Lightweight hybrid structures of Al MMCs and titanium alloy dissimilar materials have great prospect in the defence industry application. So, it is necessary to join Al MMCs with Ti metal to achieve this structural design. In this work, in-situ TiB2/7050 composite and TA2 were firstly attempted to join by TIG welding-brazing technique. The result was that the intact welding-brazing butt joint was successfully fabricated. The joint presents dual characteristics, being a brazing on TA2 side and a welding on TiB2/7050 side. At brazing joint side, ER4043 filler metal effectively wets on TA2 under TIG heating condition, and a continuous interfacial reaction layer with 1—3μm is formed at welded metal/TA2 interface. The whole interfacial reaction layers are composed of Ti(AlSi)3 intermetallic compounds (IMCs), but their morphologies at the different regions present obvious distinguishes. The microhardness of the reaction layers is as much as 141—190 HV. At welding joints side, the fusion zone appears the equixaed crystal structure, and the grain sizes are much smaller than those of welded metal, which is attributed to the effect of TiB2 particulates from the melted TiB2/7050 on acceleration formation and inhibiting growth for the new crystal nucleus. The tensile test results show that average tensile strength of the optimal welding-brazing joint is able to achieve 138 MPa. The failure of the tensile joint occurs by quasi-cleavage pattern, and the cracks initiate from the IMCs layer at the groove surface of TA2 and propagate into the welded metal.     

5－乙酰基－2－氨基二苯甲酮的合成

用对硝基苯乙酮、乙二醇、苯乙腈、氢气、高氯酸为原料,经酮基保护,环化,催化加氢和消除反应,合成出较高产率的5-乙酰基-2-氨基二苯甲酮。对反应机理作了初步探讨,并用元素分析、IR和1HNMR对其结构进行了表征。