Supply licensing when the manufacturer strategically commits to invest in R&D

This article proposes a strategic reason for a proprietary component supplier to license her technology to a competitor or a manufacturer: her anticipation of the manufacturer's strategic commitment to invest in research and development (R&D). We address this phenomenon with a game theoretic model. Our results show that the manufacturer's full commitment to invest in R&D enables the supplier to license, sell a larger quantity through the supply chain, and charge lower prices. These results are robust to the type of demand uncertainty faced by the manufacturer within the class of increasing generalized failure rate distributions. © 2014 Wiley Periodicals, Inc. Naval Research Logistics 61: 341–350, 2014     

PC机并行口的扩展

本文介绍一种经济实用的并行口扩展板电路。实践证明,该电路工作性能稳定,操作方便可靠,适用于PC/XT,PC/AT机的I/O扩展。     

基于旋量方法的高超声速飞行器三维非线性伪最优制导律设计

针对高超声速飞行器制导过程中的通道耦合问题,设计一种基于旋量方法的三维非线性伪最优制导律。引入角度矢量、视线旋量、视线旋量速度等概念,通过等价性证明,得出视线旋量、视线旋量速度控制分别与视线方位、视线角速度控制具有一致性的结论,从而将制导问题转化为视线旋量和旋量速度的控制问题;基于旋量方法构建弹目视线旋量、视线旋量速度模型,构建得到飞行器制导的三维非线性模型;为避免直接求解Riccati微分方程过程的复杂性,引入伪控制变量,将三维非线性制导模型转化为线性制导模型;分别针对无终端约束和有终端约束情况,基于二次型最优方法得到三维非线性伪最优制导律。该制导律避免了通道解耦,其制导参数又满足一定物理意义下的最优性。仿真结果验证了所设计制导律的有效性。     

一种新的高分辨率ADC有效位数测试方法

谱分析法和正弦拟合法是ADC动态特性测试的两种常用方法。但在测试信号源信噪比较低的情况下,两种方法的测试结果都存在较大的偏差。提出了一种新的ADC动态性能测试方法,该方法能较好消除信号源对测量结果的影响,使得在普通信号源下可以测试高分辨率的ADC。仿真分析证明了这一测试方法的正确性。最后给出了采用该方法对一ADC系统的实测结果。     

基于串联谐振变换器的感应式电能传输系统研究

摘要：为提高装甲车辆蓄电池充电装置的环境适应性和安全性,解决传导式电能传输不适合旋转部件的难题,提出一种基于串联谐振式变换器的感应式电能传输系统．该系统是采用旋转式耦合器,以耦合器的漏感为谐振电感,应用全桥式串联谐振功率变换器的电能传输系统．利用所设计的感应式电能传输试验装置,进行了不同气隙条件下的功率传输和初、次级电流对比试验,试验结果表明：随着耦合器气隙增大,电能传输效率呈现斜率渐缓式减小趋势,励磁电感减小,励磁电流变大,耦合器的铁损增加,系统的功率因数降低．     

漏磁检测的励磁装置优化设计

为了提高漏磁检测的灵敏度,利用ANSYS软件建立了漏磁检测励磁装置的三维有限元模型,研究了钢板的厚度、永磁体厚度、磁极面积以及磁化间隙等因素对钢板局部磁化效果的影响,得到了钢板磁化强度随永磁体几何参数改变时的变化规律,提出了永磁磁化方式下励磁装置优化设计的基本方法,对励磁装置各部分参数进行了优化设计．实验证明,优化设计的励磁装置能改善磁化效果,提高检测灵敏度．     

部分服务台同步多重休假的GI/M/c稳态队长

在经典GI/M/c排队中引入部分服务台同步多重休假策略,利用拟单生过程和矩阵几何解的方法,求解系统的稳态队长分布及其条件随机分解。     

飞机机翼结构损伤仿真研究

飞机结构的战伤模式及战伤程度预测对于制定战场抢修预案及改进战斗生存力设计具有重要意义。采用计算机模拟仿真技术定量分析了飞机机翼结构遭受射弹攻击后的损伤情况。通过损伤仿真讨论了3类情形,一是机翼结构受到简单的侵彻后的冲击效应;二是高速射弹攻击带有翼盒的机翼,而产生流体动力冲压效应;三是在射弹冲击模型中增加爆炸条件,研究射弹以任意角度冲击不同的位置产生的耦合效应。基于AN SY S/LS-DYNA仿真,给出了机翼结构损伤的结果,结论为战伤飞机战场抢修的快速评估提供了科学依据,也为飞机平时修理提供了参考。     

位置修正技术在航位推算中的应用

利用图解法证明了航位推算轨迹和真实轨迹相似,符合相似性原理,并通过图解法推导位置修正公式;将位置修正技术用于里程仪的初始标定,经实测数据证明标定后的航向安装偏差角、俯仰安装偏差角及里程仪刻度系数误差大幅减小;将位置修正技术与GPS结合进行GPS/DR组合导航,经Matlab仿真证明该组合导航在长距离行车可将航向误差角限制在3.6′之内;该修正技术具有较高的实际应用价值。     

A partial characterization of the optimal ordering/rationing policy for a periodic review system with two demand classes and backordering

We consider a finite horizon periodic review, single product inventory system with a fixed setup cost and two stochastic demand classes that differ in their backordering costs. In each period, one must decide whether and how much to order, and how much demand of the lower class should be satisfied. We show that the optimal ordering policy can be characterized as a state dependent (s,S) policy, and the rationing structure is partially obtained based on the subconvexity of the cost function. We then propose a simple heuristic rationing policy, which is easy to implement and close to optimal for intensive numerical examples. We further study the case when the first demand class is deterministic and must be satisfied immediately. We show the optimality of the state dependent (s,S) ordering policy, and obtain additional rationing structural properties. Based on these properties, the optimal ordering and rationing policy for any state can be generated by finding the optimal policy of only a finite set of states, and for each state in this set, the optimal policy is obtained simply by choosing a policy from at most two alternatives. An efficient algorithm is then proposed. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010