顶置坦克炮自动装弹系统初探

针对顶置坦克炮的结构,分析了它对自动装弹系统的特殊要求,经过方案论证,提出了一种全新的自动装弹系统方案,确定了其组成、工作原理和控制装置要求,并进行了3维建模,对项置坦克炮装弹问题的解决具有一定的借鉴意义.     

Effect of metal powders on explosion of fuel-air explosives with delayed secondary igniters

In order to improve the energy level of fuel air explosive(FAE) with delayed secondary igniters, high energetic metal powders were added to liquid fuels mainly composed of ether and isopropyl nitrate. Metal powders' explosive properties and reaction mechanisms in FAE were studied by high-speed video, pressure test system, and infrared thermal imager. The results show that compared with pure liquid fuels, the shock wave overpressure, maximum surface fireball temperature and high temperature duration of the mixture were significantly increased after adding high energetic metal powder. The overpressure values of the liquid-solid mixture at all measuring points were higher than that of the pure liquid fuels. And the maximum temperature of the fireball was up to 1700 ℃, which was higher than that of the pure liquid fuels. After replacing 30％of aluminum powder with boron or magnesium hydride, the shock wave pressure of the mixture was further increased. The high heat of combustion of boron and the hydrogen released by magnesium hydride could effectively increase the blast effect of the mixture. The improvement of the explosion performance of boron was better than magnesium hydride. It shows that adding high energetic metal powder to liquid fuels can effectively improve the explosion performance of FAE.     

Hazard evaluation of ignition sensitivity and explosion severity for three typical MH2 (M＝Mg,Ti, Zr) of energetic materials

MgH2, TiH2, and ZrH2 are three typical metal hydrides that have been gradually applied to composite explosives and propellants as additives in recent years. To evaluate ignition sensitivity and explosion severity, the Hartmann device and spherical pressure vessel were used to test ignition energy and ex-plosion pressure, respectively. The results showed that the ignition sensitivity of ZrH2, TiH2 and MgH2 gradually increased. When the concentration of MgH2 is 83.0 g/m3 in Hartmann device, the ignition energy attained a minimum of 10.0 mJ. The explosion pressure of MgH2 were 1.44 times and 1.76 times that of TiH2 and ZrH2, respectively, and the explosion pressure rising rate were 3.97 times and 9.96 times that of TiH2 and ZrH2, respectively, through the spherical pressure vessel. It indicated that the reaction reactivity and reaction rate of MgH2 were higher than that of TiH2 and ZrH2. In addition, to conduct in-depth theoretical analysis of ignition sensitivity and explosion severity, gas production and combus-tion heat per unit mass of ZrH2, TiH2 and MgH2 were tested by mercury manometer and oxygen bomb calorimetry. The experimental results revealed that MgH2 had a relatively high gas production per unit mass (5.15 mL/g), while TiH2 and ZrH2 both had a gas production of less than 2.0 mL/g. Their thermal stability gradually increased, leading to a gradual increase in ignition energy. Furthermore, compared with theoretical combustion heat, the combustion ratio of MgH2, TiH2 and ZrH2 was more than 96.0%, with combustion heat value of 29.96, 20.94 and 12.22 MJ/kg, respectively, which was consistent with the explosion pressure and explosion severity test results.     

自动装弹机开放式自动测试系统的设计研究

针对自动装弹机故障难以检测、现有检测方法重复开发和利用效率不高等现象, 提出了自动装弹机开放式自动测试系统的概念, 分析了检测系统硬件和软件构成, 详细讨论了通用检测平台的功能组成, 为军用和民用产品的检测提供了一种新方法。     

在Vs．net集成环境下创建带卸载的安装程序

创建安装程序是一件很简单的事,Vs.net提供了创建安装程序的向导,开发人员能够轻松地创建一个便于用户使用的安装程序。而按向导创建的安装程序没有为用户提供相应的卸载程序或快捷方式,为用户带来许多不便。以示例的形式详细介绍如何在Vs.net集成环境下创建带卸载的安装程序。     

无人炮塔系统关键技术组合分析

无人炮塔系统是未来火力系统发展的方向,在坦克和装甲车辆炮塔部分被命中概率高的现实情况下,无人炮塔对乘员来说相对安全。文章初步分析了无人炮塔系统的关键技术——遥控火炮技术和自动输弹技术实现的可能性和途径,并且针对在相同底盘上配置更大威力火炮的要求,探讨了膨胀波技术在无人炮塔上的应用。     

炸药装药在压剪加载下的起爆特点

进行了两类压剪加载实验：（１）利用石英的平面正碰撞产生压剪加载的实验,采用电磁质速法测试装药试件内部不同质点的运动情况,分析炸药装药中发生化学反应的可能性;（２）在压剪炮上采用平行倾斜碰撞产生压剪加载的实验,观测炸药装药爆炸的可能性。由实验可以看出：在亚爆轰状态的压缩加载应力条件下,剪切的联合作用对炸药的起爆起到敏化作用,适当比例的压剪加载造成更加敏感的炸药起爆响应。文中给出了起爆响应规律和响应机制的实验分析。     

在分离式Hopkinson拉杆实验中确定临界实验条件的经验方法

在分离式Hopkinson拉杆实验中,常常需要获得试样在经历一个拉力脉冲拉断情况下的最低应变率,而在分离式Hopkinson拉杆装置中确定对应最低应变率的发射压力需要进行多次尝试性实验。为了更好地解决这一问题,提出一种简单的经验方法,可以通过一次拉断的实验结果计算出一个拉力脉冲拉断试样需要的最小发射压力及相应的应变率,进一步可以预测不同发射压力下的应变率。对4种铝合金试样进行拉伸实验,结果表明,利用提出的经验方法得到的应变率结果与实验结果吻合较好,可以有效地对发射压力和实验应变率进行预估。     

CFRP筋混凝土柱骨架曲线数值模拟

为研究CFRP筋混凝土柱在低周反复荷载作用下的骨架曲线,基于已有的3根CFRP筋混凝土柱的滞回曲线,采用混凝土损伤塑性本构模型和碳纤维筋本构模型,运用有限元分析软件ABAQUS对其试验过程进行数值模拟,并将模拟所得骨架曲线与试验结果进行对比。结果表明:通过数值模拟得到的骨架曲线与试验结果吻合较好,数值模拟趋势与试验得到的趋势一致,从而对该有限元模型的适用性进行了验证。     

多品种空投小件装载优化建模研究

针对空投小件装载率低下的现状,提出利用相关容重比平衡法,制定装载计划以充分利用飞机的载重能力及其使用面积,分别建立了单机和多机空投小件装载模型。该模型充分考虑了飞机的面积和载重量,对提高空投小件装载的利用率,起到良好应用效果。