The selection allocation problem

The Selection Allocation Problem (SAP) is a single period decision problem which involves selecting profit‐maximizing (or cost‐minimizing) activities from various distinct groups, and determining the volume of those activities. The activities in each group are selected subject to the availability of that group's resource, which is provided by either pooling or blending raw inputs from several potential sources. Imbedded in the decision process is the additional task of determining how much raw input is to be allocated to each group to form the resource for that group. Instances of this problem can be found in many different areas, such as in tool selection for flexible manufacturing systems, facility location, and funding for social services. Our goal in this paper is to identify and exploit special structures in the (SAP) and use those structures to develop an efficient solution procedure. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 707–725, 1999     

Preservation of unimodality under shock models

A number of results pertaining to preservation of aging properties (IFR, IFRA etc.) under various shock models are available in the literature. Our aim in this paper is to examine in the same spirit, the preservation of unimodality under various shock models. For example, it is proved that in a non-homogeneous Poisson shock model if {p_k}_K≥0, the sequence of probabilities with which the device fails on the kth shock, is unimodal then under some suitable conditions on the mean value function Λ (t), the corresponding survival function is also unimodal. The other shock models under which the preservation of unimodality is considered in this paper are pure birth shock model and a more general shock model in which shocks occur according to a general counting process. © 1999 John Wiley & Sons, Inc. Naval Research Logistics 46: 952–957, 1999     

栅格地理数据并行格式转换引擎

如今大规模地理数据正在社会各个部门和组织中迅速积累,但是由于部门利益和历史沿袭等原因,大规模地理数据共享仍然极具挑战,相应共享技术需求仍然极其旺盛。作为地理数据共享的基础方式之一,传统单机地理数据格式转换技术,一方面受限于磁盘读写及带宽瓶颈,另一方面面对日趋庞大的数据规模,已很难满足实际应用需求。因此提出一种针对栅格地理数据的并行格式转换引擎,采用高性能计算集群环境支持大规模栅格地理数据转换共享,大幅降低了大规模栅格地理数据转换过程的时间成本。栅格地理数据并行格式转换引擎采用基于公共接口的设计理念,框架灵活、具有良好的扩展性,支持地理数据格式的读写自定义以及新数据格式添加,能够实现接入数据格式间的任意两两转换。为验证引擎框架及其处理效率,在Lustre并行集群环境下以格网数据交换格式(国家地理空间数据交换格式)向常见栅格地理格式的转换为示例进行了测试实验。结果表明,栅格地理数据并行格式转换引擎能够在8个节点Lustre集群中达到7.54的良好并行加速比。     

Modeling and realization of real time electronic countermeasure simulation system based on SystemVue

In this paper, we proposed a new design scheme of real time electronic countermeasure simulation system. This paper mainly expounds the modeling and realization methods of each part of the whole simulation system, and the real-time property of system has been lucubrated. Electronic countermeasure simulation system is the key part of military training of individuals; it can also allow the realistic evaluation of the performance of modern equipments and techniques. As a proof, we have drawn up a series of simulation scenarios, such as radar electronic reconnaissance simulation scenario, to explain the feasibility and the superiority of our modeling scheme in this paper.     

Effect of tool rotational speed on the particle distribution in friction stir welding of AA6092/17.5 SiCp-T6 composite plates and its consequences on the mechanical property of the joint

This study investigates the effect of tool rotational speed (TRS) on particle distribution in nugget zone (NZ) through quantitative approach and its consequences on the mechanical property of friction stir welded joints of AA6092/17.5 SiC_p-T6 composite. 6 mm thick plates are welded at a constant tool tilt angle of 2° and tool traverse speed of 1 mm/s by varying the TRS at 1000 rpm, 1500 rpm and 2000 rpm with a taper pin profiled tool. Microstructure analysis shows large quantity of uniformly shaped smaller size SiC particle with lower average particle area which are homogeneously distributed in the NZ. The fragmentation of bigger size particles has been observed because of abrading action of the hard tool and resulting shearing effect and severe stress generation due to the rotation of tool. The particles occupy maximum area in the matrix compared to that of the base material (BM) due to the redistribution of broken particles as an effect of TRS. The migration of particles towards the TMAZ-NZ transition zone has been also encountered at higher TRS (2000 rpm). The microhardness analysis depicts variation in average hardness from top to bottom of the NZ, minimum for 1500 rpm and maximum for 2000 rpm. The impact strength at 1000 rpm and 1500 rpm remains close to that of BM (21.6 J) while 2000 rpm shows the accountable reduction. The maximum joint efficiency has been achieved at 1500 rpm (84%) and minimum at 1000 rpm (68%) under tensile loading. Fractographic analysis shows mixed mode of failure for BM, 1000 rpm and 1500 rpm, whereas 2000 rpm shows the brittle mode of failure.     

激光制备高附着性能的铜基类金刚石膜

提升类金刚石(Diamond-Like Carbon, DLC)膜在被保护基底上的附着能力具有明显的实际应用价值。从微观机理上分析了前期设计的Cu基多层DLC膜有效性的原因。在此基础上,研究了DLC/SiC循环层中两者厚度比例对膜层的附着性能、纳米硬度和耐磨性的影响,以优化结构、进一步提升实际应用所需的膜层性能。纳米划痕和压痕测试结果表明:随着DLC层与SiC层厚度比例的增大,多层DLC膜在Cu基上附着性能逐渐降低,但当厚度比小于2.3时,仍接近厚度400 nm的单层DLC膜在Si基上的附着性能;Cu基多层DLC膜的纳米硬度逐渐提高,同时,耐磨性接近纯DLC膜。     

基于灰色模型的电磁轨道发射装置温度研究

在电磁发射过程中导轨温度受众多因素影响,而其中部分因素很难进行精确分析,为此运用灰色系统的分析方法对电磁轨道发射装置温度进行研究。为获取模型所需实验数据,搭建电磁轨道发射装置测试系统,并借此测量发射过程中的电流、导轨温度、出口速度等数据。由于测量仪器限制,借助ANSYS有限元仿真对测得的导轨温度数据进行修正,以获得导轨内表面温度。基于经典GM(1,N)模型与Simpson公式,提出一种改进型灰色模型,并以此方法对导轨温度展开研究,进一步选取同能级试验,对不同位置处各因素温升贡献度进行讨论。结论为进一步深入研究导轨温度提供参考和依据。     

直流螺旋线圈电磁发射器的能量转换效率

综合考虑换向过程、炮口剩余磁能和电阻的能量损耗等因素,建立等效电路模型,通过理论、数值计算和实验的方法,对比分析了常规螺旋发射器和一种新型螺旋发射器的效率。结果表明:电阻焦耳热损耗的能量最大,其次是换向磁能损失,而炮口剩余磁能损失最小。降低电阻、增大互感梯度、减小驱动线圈单元的匝数、增大工作电流等方式可以有效提高发射器的能量转换效率。然而,较大的互感梯度也会带来较大的换向磁能和炮口磁能损失,造成炮管烧蚀甚至损坏、能量泄放和效率降低。另外,恒流工作模式的螺旋发射器理论效率超过轨道炮,且新型螺旋发射器结构的理论效率接近100%,未来有望在超导或较低电阻的情况下实现应用。     

电磁发射超高速一体化弹丸

超高速一体化弹丸作为电磁能武器的发射对象,存在与传统火炮发射弹丸不同的诸多科学难题。对近年来国内外在电磁发射一体化弹丸研究方面取得的理论、试验研究成果进行了总结,并分析了目前面临的基础理论和关键技术问题,以及针对这些问题提出的解决思路,旨在为电磁发射一体化弹丸的后续研究提供一些参考。     

电磁发射系统以太网拓扑结构建模优化

拓扑结构优化模型是网络中的一类重要模型,可以有效地优化系统整体链路性能。针对电磁发射系统以太网拓扑结构中部分节点和链路的负载过大,一旦发生堵塞,将会影响网络中关键链路性能的问题,建立网络拓扑结构优化的多目标规划模型,并提出一套基于基因环操作的遗传算法对其进行求解,通过仿真得出最优的网络拓扑结构。根据仿真结果修改实际网络节点默认配置参数,结果显示该模型和算法能有效均衡负载,降低网络冲突率,且不需要改变电磁发射系统以太网的物理链路,不会增加额外成本,对电磁发射类系统具有普适性的意义。