参数曲线几何连接的几个定理

导出了对参数曲线几何连接简单、实用的几个定理。     

等离子弧加热切削工程陶瓷试验

主要阐述了采用自制新型水介质等离子弧设备对氮化硅陶瓷材料进行加热辅助切削的试验条件及过程。通过对加工后刀具磨损的测量,总结出在热源距离h=8mm,电流I=6A,电压U=140V的热源条件下,采用V=450r/min、f=0·08mm/r和ap=0·2mm的切削用量时,刀具磨损比较小,切削效果理想。该试验说明了应用该小功率水介质等离子弧辅助加热切削氮化硅陶瓷材料的方法可行而有效,能够大大降低加工成本,对促进工程陶瓷材料的更广泛应用具有重要意义。     

轨、姿控固体燃气发生器式动力系统研究

概述了固体燃气发生器的特点及发展状况,提出了如何进一步研究的建议。     

Φ2mm丝材电弧喷涂工艺对涂层结合强度的影响

分析了喷砂预处理和电弧喷涂这两个过程的工艺参数对涂层的结合强度的影响。将分数维理论用于喷砂后的试样表面,研究了喷砂角度、分数维和结合强度的相互关系,找到了获得最高结合强度所用的喷砂角度;通过正交试验法,找到了能获得最佳涂层结合强度的Φ2mm丝材电弧喷涂工艺参数。     

图像识别技术在射线探伤中的应用

针对焊缝射线探伤中的缺陷评片问题,利用数字成像及图像识别技术,对射线探伤底片进行了计算机自动识剐技术的研究,并以此为基础,对典型缺陷进行了识别.结果显示,利用此技术能够提高和改进评片的质量及效率.     

SiC光学材料的电弧增强等离子体加工方法

Si C光学材料具有高化学稳定性,其在普通的等离子体加工中难以获得较高的加工效率。在等离子体加工实验中,发现提高等离子体的自身射频电压可增强等离子体与Si C材料之间的电弧放电作用,而借助电弧的增强作用可提高Si C材料的加工效率,因此提出电弧增强等离子体加工方法。为研究电弧的形成原理,使用自制的探针分别测量了普通电感耦合等离子体和电弧增强等离子体的电压。分别使用传统方法和电弧增强方法对S-Si C进行直线扫描加工实验,证明了电弧增强等离子体加工方法具有更高的加工效率。     

Optimization of process parameters of the activated tungsten inert gas welding for aspect ratio of UNS S32205 duplex stainless steel welds

The activated TIG (ATIG) welding process mainly focuses on increasing the depth of penetration and the reduction in the width of weld bead has not been paid much attention. The shape of a weld in terms of its width-to-depth ratio known as aspect ratio has a marked influence on its solidification cracking tendency. The major influencing ATIG welding parameters, such as electrode gap, travel speed, current and voltage, that aid in controlling the aspect ratio of DSS joints, must be optimized to obtain desirable aspect ratio for DSS joints. Hence in this study, the above parameters of ATIG welding for aspect ratio of ASTM/UNS S32205 DSS welds are optimized by using Taguchi orthogonal array (OA) experimental design and other statistical tools such as Analysis of Variance (ANOVA) and Pooled ANOVA techniques. The optimum process parameters are found to be 1 mm electrode gap, 130 mm/min travel speed, 140 A current and 12 V voltage. The aspect ratio and the ferrite content for the DSS joints fabricated using the optimized ATIG parameters are found to be well within the acceptable range and there is no macroscopically evident solidification cracking.     

Feasibility of surface-coated friction stir welding tools to join AISI 304 grade austenitic stainless steel

An attempt is made to develop the tools that are capable enough to withstand the shear, impact and thermal forces that occur during friction stir welding of stainless steels. The atmospheric plasma spray and plasma transferred arc hardfacing processes are employed to deposit refractory ceramic based composite coatings on the Inconel 738 alloy. Five different combinations of self-fluxing alloy powder and 60% ceramic reinforcement particulate mixtures are used for coating. The best friction stir welding tool selected based on tool wear analysis is used to fabricate the austenitic stainless steel joints.     

Effect of welding processes and consumables on fatigue crack growth behaviour of armour grade quenched and tempered steel joints

Quenched and Tempered (Q&T) steels are widely used in the construction of military vehicles due to its high strength to weight ratio and high hardness. These steels are prone to hydrogen induced cracking (HIC) in the heat affected zone (HAZ) after welding. The use of austenitic stainless steel (ASS) consumables to weld the above steel was the only available remedy because of higher solubility for hydrogen in austenitic phase. The use of stainless steel consumables for a non-stainless steel base metal is not economical. Hence, alternate consumables for welding Q&T steels and their vulnerability to HIC need to be explored. Recent studies proved that low hydrogen ferritic steel (LHF) consumables can be used to weld Q&T steels, which can give very low hydrogen levels in the weld deposits. The use of ASS and LHF consumables will lead to distinct microstructures in their respective welds. This microstructural heterogeneity will have a drastic influence in the fatigue crack growth resistance of armour grade Q&T steel welds. Hence, in this investigation an attempt has been made to study the influence of welding consumables and welding processes on fatigue crack growth behaviour of armour grade Q&T Steel joints. Shielded metal arc welding (SMAW) and Flux cored arc welding (FCAW) were used for fabrication of joints using ASS and LHF consumables. The joints fabricated by SMAW process using LHF consumable exhibited superior fatigue crack growth resistance than all other joints.     

基于虚拟触角的自主车辆运动规划方法

在对自主车辆进行运动学分析的基础上,结合反应式行为规划方法和昆虫利用触角进行避障行走的思想,提出了一种使用圆弧形虚拟触角进行运动规划算法,并规划出在各圆弧轨迹片段车辆前轮摆角的参考值。仿真和实验结果表明：通过设置适当的初始参数,该算法能够使自主车辆在行驶过程中完全避开障碍物到达目标点,且轨迹光滑,满足车辆的运动学约束条件。该算法计算简洁、实时性强,适用于底层的实时控制,为自主车辆运动规划提供了一种简便、有效的策略。