GPS仿真器设计

本文详细介绍了在无人机利用ＧＰＳ导航半实物仿真系统中ＧＰＳ仿真器的设计原理。通过分析ＧＰＳ及ＧＰＳ接收机的基本工作方式,ＷＧＳ－８４与各种坐标系的转换关系,研制了ＧＰＳ仿真器。它将由飞行仿真计算机得到的无人机位置信息转换成与之对应的ＧＰＳ信号,输入飞控计算机,以实现ＧＰＳ导航的仿真试验。     

Performance analysis of queue length monitoring of M/G/1 systems

This study investigates the statistical process control application for monitoring queue length data in M/G/1 systems. Specifically, we studied the average run length (ARL) characteristics of two different control charts for detecting changes in system utilization. First, the nL chart monitors the sums of successive queue length samples by subgrouping individual observations with sample size n. Next is the individual chart with a warning zone whose control scheme is specified by two pairs of parameters, (upper control limit, d_u) and (lower control limit, d_l), as proposed by Bhat and Rao (Oper Res 20 (1972) 955–966). We will present approaches to calculate ARL for the two types of control charts using the Markov chain formulation and also investigate the effects of parameters of the control charts to provide useful design guidelines for better performance. Extensive numerical results are included for illustration. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

Periodic review inventory management with contingent use of two freight modes with fixed costs

We study a stochastic inventory model of a firm that periodically orders a product from a make‐to‐order manufacturer. Orders can be shipped by a combination of two freight modes that differ in lead‐times and costs, although orders are not allowed to cross. Placing an order as well as each use of each freight mode has a fixed and a quantity proportional cost. The decision of how to allocate units between the two freight modes utilizes information about demand during the completion of manufacturing. We derive the optimal freight mode allocation policy, and show that the optimal policy for placing orders is not an (s,S) policy in general. We provide tight bounds for the optimal policy that can be calculated by solving single period problems. Our analysis enables insights into the structure of the optimal policy specifying the conditions under which it simplifies to an (s,S) policy. We characterize the best (s,S) policy for our model, and through extensive numerical investigation show that its performance is comparable with the optimal policy in most cases. Our numerical study also sheds light on the benefits of the dual freight model over the single freight models. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

Analysis of decentralized multi‐product pull systems with lost sales

We study a pull‐type, flexible, multi‐product, and multi‐stage production/inventory system with decentralized two‐card kanban control policies. Each stage involves a processor and two buffers with finite target levels. Production stages, arranged in series, can process several product types one at a time. Transportation of semi‐finished parts from one stage to another is performed in fixed lot sizes. The exact analysis is mathematically intractable even for smaller systems. We present a robust approximation algorithm to model two‐card kanban systems with batch transfers under arbitrary complexity. The algorithm uses phase‐type modeling to find effective processing times and busy period analysis to identify delays among product types in resource contention. Our algorithm reduces the effort required for estimating performance measures by a considerable margin and resolves the state–space explosion problem of analytical approaches. Using this analytical tool, we present new findings for a better understanding of some tactical and operational issues. We show that flow of material in small procurement sizes smoothes flow of information within the system, but also necessitates more frequent shipments between stages, raising the risk of late delivery. Balancing the risk of information delays vis‐à‐vis shipment delays is critical for the success of two‐card kanban systems. Although product variety causes time wasted in setup operations, it also facilitates relatively short production cycles enabling processors to switch from one product type to another more rapidly. The latter point is crucial especially in high‐demand environments. Increasing production line size prevents quick response to customer demand, but it may improve system performance if the vendor lead‐time is long or subject to high variation. Finally, variability in transportation and processing times causes the most damage if it arises at stages closer to the customer. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

Quantifying the performance effects of idle time utilization in multiserver systems

In many practical multiserver queueing systems, servers not only serve randomly arriving customers but also work on the secondary jobs with infinite backlog during their idle time. In this paper, we propose a c‐server model with a two‐threshold policy, denoted by (e d), to evaluate the performance of this class of systems. With such a policy, when the number of idle servers has reached d (<c), then e (<d) idle agents will process secondary jobs. These e servers keep working on the secondary jobs until they find waiting customers exist in the system at a secondary job completion instant. Using the matrix analytic method, we obtain the stationary performance measures for evaluating different (e, d) policies. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2007.     

基于扩展Petri网的动态服务聚合流程描述模型及其BPEL4WS表示方法

针对现有服务聚合流程建模方法的不足,基于扩展Petri网提出了一种新的服务聚合流程/资源描述模型WSCP/R-net,有效解决了动态服务聚合流程模型中不确定路径选择和服务的动态变化性问题。给出了WSCP/R-net模型向BPEL4WS的转换算法,并以城市应急处理为例说明了转换算法的有效性。     

利用火箭深弹系统拦截鱼雷的技术改进方法探析

多功能、多用途是火箭深弹系统的主要发展方向之一。根据水面舰艇武器装备的实际,仅从拦截潜艇发射的鱼雷角度出发,对舰载火箭深弹系统拦截来袭鱼雷的可行性进行了分析。在此基础上,探讨了利用火箭深弹系统拦截鱼雷的系统选择、深弹战斗部的开发、引信选型、发射管安装及配置、火控系统的改进等关键问题,并提出了一些具体的改进方法。     

OQAM/OFDM系统中基于压缩感知的离散导频信道估计方法

针对多径信道条件下,偏移正交幅度调制的正交频分复用(OQAM/OFDM)系统中采用导频序列方式进行信道估计时导频开销较大的问题,提出一种基于压缩感知的离散导频信道估计方法。该方法利用无线信道的稀疏特性,建立基于压缩感知的OQAM/OFDM系统信道估计模型,对离散导频结构进行了优化设计,使较少的导频符号随机分布在子载波上,在接收端利用信号恢复算法实现信道估计。该方法能够显著减少导频数量,并实现高精度信道估计性能,通过实验仿真对比验证了所提方法在慢时变和快时变的无线信道条件下的有效性。     

坦克直瞄/间瞄射击一体化火控技术

直瞄射击方式是目前坦克采用的主要射击方式。直瞄射击方式受战场通视度及瞄准装置视距的影响,最大射击距离一般在5 km左右。间瞄射击方式不需要直接瞄准目标,不受战场通视度的影响,最大射击距离主要取决于火炮及弹药的性能,一般在10 km以上。未来坦克应具备直瞄射击与间瞄射击一体化能力。通过直瞄/间瞄射击火控技术的对比与分析,提出坦克直瞄/间瞄射击一体化火控方案。一体化火控具有新的技术特色,具有更强的综合作战能力,是未来坦克火控技术发展的一种趋势。     

巡航导弹INS/视觉组合导航方法

巡航导弹仅依靠惯性导航系统进行导航时,其导航误差将随着时间的累积不断变大。INS/GPS是最常用的组合导航方式,但存在战时不可用的缺陷。为此提出了一种基于EKF的巡航导弹INS/视觉组合导航方法。利用巡航导弹相对于单个已知点地标的视觉信息(方位角和高度角)和高度信息,巡航导弹INS的位置和速度误差能够同时被估计出来。最后,仿真验证了该方法的有效性。